scholarly journals Improving the Thermal Efficiency of Flat Plate Solar Collector Using Nano-Fluids as a Working Fluids: A Review

2021 ◽  
Vol 8 (3) ◽  
Author(s):  
Saif Ali Kadhim ◽  
Osama Abd AL-Munaf Ibrahim
Keyword(s):  
Flat Plate ◽  
Thermal Efficiency ◽  
Solar Collector ◽  
Base Fluid ◽  
Working Fluid ◽  
Solar Collectors ◽  
Nano Fluid ◽  
Flat Plate Solar Collector ◽  
Nano Fluids ◽  
Better Than

Solar energy is one of the most important types of renewable energy and is characterized by its availability, especially in Iraq. It can be used in many applications, including supply thermal energy by solar collectors. Improving the thermal efficiency of solar collector leads to an increase in the thermal energy supplied. Using a nano-fluid instead of base fluid (water is often used) as a working fluid is a method many used to increase the thermal efficiency of solar collectors. In this article, the latest research that used nano-fluid as a working fluid in evaluating the thermal efficiency of solar collector, type flat plate was reviewed. The thermal efficiency improvement of flat plate solar collector was reviewed based on the type of nanoparticles (metal oxides, semiconductors oxides, carbon compounds) used in the base fluid and comparison was made between these nanoparticles under the same conditions. Moreover, the effect of varying the concentration of nanoparticles in the base fluid and changing the working fluid flow rate on the thermal efficiency of flat plate solar collector was also reviewed. The results of the review showed that nano-fluids containing carbon compounds are better than other nano-fluids and that copper oxide is better than the rest of the metal oxides used in improving the thermal efficiency of flat plate solar collectors.

Performance of the Flat Plate Solar Collector Operated with Water-Al2O3 Nanofluid

2016 ◽  
Vol 831 ◽  
pp. 181-187 ◽  
Author(s):  
Janusz T. Cieśliński ◽  
Bartosz Dawidowicz ◽  
Aleksandra Popakul
Keyword(s):  
Flat Plate ◽  
Solar Collector ◽  
Base Fluid ◽  
Fossil Fuels ◽  
Thermal Characteristics ◽  
Working Fluid ◽  
Solar Collectors ◽  
Recent Method ◽  
Flat Plate Solar Collector

Solar collectors is one of the technologies absorbing energy from solar beam and utilizing it for heating purposes, displacing the need to burn fossil fuels. There are many ways to improve effectiveness of the solar collectors [1,2]. Recent method to absorb more heat from the solar beam is to modify thermal characteristics of the working fluid. For this purpose one can use nanofluids, i.e. suspensions of metallic or nonmetallic nanoparticles in a base fluid [3].

Investigating the Effect of Al2O3/Water Nanofluid on the Efficiency of a Thermosyphon Flat-Plate Solar Collector

2016 ◽  
Author(s):  
Mohamed Nabeel A. Negm ◽  
Ahmed A. Abdel-Rehim ◽  
Ahmed A. A. Attia
Keyword(s):  
Flat Plate ◽  
Solar Collector ◽  
Fossil Fuels ◽  
Energy Conversion Efficiency ◽  
High Energy ◽  
Green Energy ◽  
Working Fluid ◽  
Steady Increase ◽  
Solar Collectors ◽  
Flat Plate Solar Collector

The world is still dependent on fossil fuels as a continuous and stable energy source, but rising concerns for depletion of these fuels and the steady increase in demand for clean “green” energy have led to the rapid growth of the renewable energy field. As one of the most available energy sources with high energy conversion efficiency, solar energy is the most prominent of these energies as it also has the least effect on the environment. Flat plate collectors are the most common solar collectors, while their efficiency is limited by their absorber’s effectiveness in energy absorption and the transfer of this energy to the working fluid. The efficiency of flat plate solar collectors can be increased by using nanofluids as the working fluid. Nanofluids are a relatively recent development which can greatly enhance the thermophysical properties of working fluids. In the present study, the effect of using Al2O3/Water nanofluid as the working fluid on the efficiency of a thermosyphon flat-plate solar collector was experimentally investigated. The results of this experiment show an increase in efficiency when using nanofluids as the working fluid compared to distilled water. It was found that Al2O3/water nanofluids are a viable enhancement for the efficiency of flat-plate solar collectors.

scholarly journals Performance Evaluation of Flat Plate and Vacuum Tube Solar Collectors by Applying a MWCNT/Fe3O4 Binary Nanofluid

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1715
Author(s):  
Minjung Lee ◽  
Yunchan Shin ◽  
Honghyun Cho
Keyword(s):  
Flat Plate ◽  
Solar Collector ◽  
High Performance ◽  
Operating Conditions ◽  
Working Fluid ◽  
Efficiency Improvement ◽  
Solar Collectors ◽  
Vacuum Tube ◽  
Flat Plate Solar Collector ◽  
Wide Operating

This study experimentally investigated the performance characteristics of water and MWCNT/Fe3O4 binary nanofluid as a working fluid in a flat plate and vacuum tube solar collectors. As a result, the highest efficiency was 80.3% when 0.005 vol.% MWCNT/0.01 vol.% Fe3O4 binary nanofluid was applied to the flat plate solar collector, which was a 17.6% increase in efficiency, compared to that when water was used. In the case of the vacuum tube solar collector, the highest efficiency was 79.8%, which was 24.9% higher than when water was applied. Besides, when the mass flux of MWCNT/Fe3O4 binary nanofluid was changed from 420 to 598 kg/s·m2, the maximum efficiencies of the flat plate and vacuum tube solar collectors were increased by 7.8% and 8.3%, respectively. When the MWCNT/Fe3O4 binary nanofluid was applied to the vacuum tube solar collector, the efficiency improvement was much more significant, and the high performance could be maintained for wide operating conditions, compared with the flat plate solar collector.

Performance Analysis of Alumina Nanofluids on Flat Plate Solar Collector by Using Computational Fluid Dynamics

2020 ◽  
Vol 12 (6) ◽  
pp. 810-814
Author(s):  
S. T. Jaya Suthahar ◽  
S. Saravanan
Keyword(s):  
Flat Plate ◽  
Solar Collector ◽  
Energy Demand ◽  
Conjugate Heat Transfer ◽  
Transfer Problem ◽  
Working Fluid ◽  
Flow Properties ◽  
3D Cad ◽  
Flat Plate Solar Collector ◽  
Nano Fluids

It is essential to find more renewable, sustainable ways of generating energy as the global energy demand is expected to grow by 30% by 2040. This work is concerned with the numerical prediction of thermal performance of flat plate solar collector, professor by varying the diameter of riser tube and changing the working fluid. A solar collector for heating a volume of 10 liters of working fluid is designed and investigated. 3D CAD model of the collector consisting of a fluid zone and two solid zones is generated for solving this conjugate heat transfer problem. Numerical analysis is carried out on the solar collector systems and their performance is predicted. The thermal and flow properties obtained for the solar collector systems are compared with each other to identify the best performing model of the solar collector. It is found from the numerical results that 14 mm riser tube with nano fluids gives comparatively best performance in terms of absorbing solar energy.

scholarly journals Aplicaciones del Captador Solar de Placa Plana y del Captador de Tubo de Vacío en la Edificación = Applications of the Flat Plate Solar Collectors and the Vacuum Tube Solar Collectors in Building

2018 ◽  
Vol 4 (3) ◽  
pp. 25 ◽  
Author(s):  
Daniel Ferrández ◽  
Carlos Moron ◽  
Jorge Pablo Díaz ◽  
Pablo Saiz
Keyword(s):  
Flat Plate ◽  
Solar Collector ◽  
Energy Demand ◽  
Hot Water ◽  
Solar Thermal ◽  
Solar Collectors ◽  
Thermal Systems ◽  
Vacuum Tube ◽  
Solar Thermal Collectors ◽  
Flat Plate Solar Collector

ResumenEl actual Código Técnico de la Edificación (CTE) pone de manifiesto la necesidad de cubrir parte de la demanda energética requerida para el abastecimiento de agua caliente sanitaria y climatización de piscinas cubiertas mediante sistemas de aprovechamiento de la energía solar térmica. En este artículo se presenta una comparativa entre las dos principales tipologías de captadores solares térmicos que existen en el mercado: el captador de placa plana y el captador de tubo de vacío, atendiendo a criterios de fracción solar, diseño e integración arquitectónica. Todo ello a fin de discernir en qué circunstancias es más favorable el uso de uno u otro sistema, comparando los resultados obtenidos mediante programas de simulación con la toma de medidas in situ.AbstractThe current Technical Building Code (CTE) highlights the need to cover part of the energy demand required for the supply of hot water and heating of indoor swimming pools using solar thermal systems. This article presents a comparison between the two main types of solar thermal collectors that exist in the market: the flat plate solar collector and the vacuum tube solar collector, according to criteria of solar fraction, design and architectural integration. All of this in order to discern in what circumstances the use of one or the other system is more favourable, comparing the results obtained through simulation programs with the taking of measurements in situ.

scholarly journals Determining the Effect of Inlet Flow Conditions on the Thermal Efficiency of a Flat Plate Solar Collector

Fluids ◽  
2018 ◽  
Vol 3 (3) ◽  
pp. 67 ◽  
Author(s):  
Mohammad Alobaid ◽  
Ben Hughes ◽  
Andrew Heyes ◽  
Dominic O’Connor
Keyword(s):  
Flat Plate ◽  
Thermal Efficiency ◽  
Solar Collector ◽  
Maximum Temperature ◽  
Inlet Temperature ◽  
Flow Conditions ◽  
Riser Pipe ◽  
Computational Fluid Dynamics Cfd ◽  
Flat Plate Solar Collector ◽  
Feed Temperature

The main objective of this study was to investigate the effect of inlet temperature (Tin) and flowrate ( m ˙ ) on thermal efficiency ( η t h ) of flat plate collectors (FPC). Computational Fluid Dynamics (CFD) was employed to simulate a FPC and the results were validated with experimental data from literature. The FPC was examined for high and low level flowrates and for inlet temperatures which varied from 298 to 373 K. Thermal efficiency of 93% and 65% was achieved at 298 K and 370 K inlet temperature’s respectively. A maximum temperature increase of 62 K in the inlet temperature was achieved at a flowrate of 5 × 10−4 kg/s inside the riser pipe. Tin and m ˙ were optimised in order to achieve the minimum required feed temperature for a 10 kW absorption chiller.

scholarly journals The Effect of the Flow Distribution on the Thermal Efficiency of a Solar Collector

1986 ◽  
Vol 39 (6) ◽  
pp. 945 ◽  
Author(s):  
MJ O'Keefe ◽  
JLA Francey
Keyword(s):  
Flat Plate ◽  
Thermal Efficiency ◽  
Solar Collector ◽  
Flow Model ◽  
Flow Distribution ◽  
Isothermal Flow ◽  
One Dimensional ◽  
Dimensional Flow ◽  
Uniform Flow Distribution ◽  
Flat Plate Solar Collector

An isothermal one-dimensional flow model is used to calculate the flow distribution across the manifold of a flat plate solar collector in order to quantify the effect of a non-uniform flow distribution on the thermal efficiency for a variety of manifold geometries. The predictions of this flow model are found to compare favourably with measured isothermal flow distributions.

scholarly journals Heat transfer in a low latitude flat-plate solar collector

2012 ◽  
Vol 16 (2) ◽  
pp. 583-591
Author(s):  
C.O.C. Oko ◽  
S.N. Nnamchi
Keyword(s):  
Heat Transfer ◽  
Flat Plate ◽  
Solar Collector ◽  
Design Parameters ◽  
Working Fluid ◽  
Fluid Temperature ◽  
Port Harcourt ◽  
Collector Efficiency ◽  
One Year ◽  
Flat Plate Solar Collector

Study of rate of heat transfer in a flat-plate solar collector is the main subject of this paper. Measurements of collector and working fluid temperatures were carried out for one year covering the harmattan and rainy seasons in Port Harcourt, Nigeria, which is situated at the latitude of 4.858oN and longitude of 8.372oE. Energy balance equations for heat exchanger were employed to develop a mathematical model which relates the working fluid temperature with the vital collector geometric and physical design parameters. The exit fluid temperature was used to compute the rate of heat transfer to the working fluid and the efficiency of the transfer. The optimum fluid temperatures obtained for the harmattan, rainy and yearly (or combined) seasons were: 317.4, 314.9 and 316.2 [K], respectively. The corresponding insolation utilized were: 83.23, 76.61 and 79.92 [W/m2], respectively, with the corresponding mean collector efficiency of 0.190, 0.205 and 0.197 [-], respectively. The working fluid flowrate, the collector length and the range of time that gave rise to maximum results were: 0.0093 [kg/s], 2.0 [m] and 12PM - 13.00PM, respectively. There was good agreement between the computed and the measured working fluid temperatures. The results obtained are useful for the optimal design of the solar collector and its operations.

Sign in / Sign up

Export Citation Format

Share Document