scholarly journals Parametric Quantification of Low GWP Refrigerant for Thermosyphon Driven Solar Water Heating System

Modern lifestyle, industrialization and economy thrive on energy which is getting expensive overtime. Thermosyphon based systems are getting attraction for their promising heat transfer efficiency and zero energy utilization. Refrigerants having ozone depletion potential (ODP) and high Global Warming Potential (GWP) have been banned or under time bared permission under Montreal (1987) and Kyoto (1997) protocols. We have devolved a Refrigerant Parametric Quantification (RPQ) method for the choice of optimal refrigerant for density driven solar water heaters. A set of 29 refrigerants are simulated Using REFPROP under various temperature and pressure conditions. The optimal parameters of thermosyphon system are identified from governing equations, international environment safety protocols and open literature. The proposed RPQ method shows most appropriate refrigerant for given temperature range. In second part, the proposed system is simulated in TRNSYS using forced circulation method. In the end, a glass evacuated tube collector is developed and tested on the principal of thermosyphon, employing the best refrigerant emerged from simulation study.

2011 ◽  
Vol 211-212 ◽  
pp. 647-650
Author(s):  
Zheng Chang ◽  
Lei Jia

Using numerical simulation to study solar water heating system it will be fast to obtain data and have a reasonable conditional statistical forecast. In this paper, based on the numerical model of an actual forced circulation solar water heating system, the whole year thermodynamic performance in a forced circulation solar water heating system are simulated and studied. It is shown that the efficiency of energy utilization and the heat loss of collectors in the system are closely related with the out door temperature and main efforts should be on the collectors.


Author(s):  
Amanie N. Abdelmessih ◽  
Siddiq S. Mohammed

Solar power is a clean source of energy, i.e. it does not generate carbon dioxide or other air pollutants. In 2017, solar power produced only 0.6 percent of the energy used in the United States, according to the Energy Information Administration. Consequently, more solar energy should be implemented, such as in solar water heaters. This research took place in Riverside, Southern California where there is an abundance of solar energy. In house uniquely designed and assembled solar tubes were used in designing a mini solar water heating system. The mini solar water heating system was set to operate under either natural or forced convection. The results of running the system under forced convection then under natural convection conditions are reported and discussed in the article. In addition, comparison of using two different solar water storage systems are reported: the first was water; the second storage medium was a combination of water and gravel. Since water heaters are extensively used for residential purposes, this research mimicked the inefficiencies in residential use and is compared with ideal operating conditions. The performance of the different cases studied is evaluated.


2019 ◽  
Vol 131 ◽  
pp. 966-976 ◽  
Author(s):  
José Luis García ◽  
Carlos Javier Porras-Prieto ◽  
Rosa María Benavente ◽  
María Teresa Gómez-Villarino ◽  
Fernando R. Mazarrón

Sign in / Sign up

Export Citation Format

Share Document