SYNTHESIS AND CHARACTERIZATION OF THIOLATED GUM KONDAGOGU AND EVALUATION AS MUCOADHESIVE POLYMER

INDIAN DRUGS ◽  
2020 ◽  
Vol 57 (01) ◽  
pp. 37-43
Author(s):  
Ashwin A. Patil ◽  
Ketan B. Patil ◽  
Laxmikant R. Zawar
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Matrix Tablet ◽  
Disintegration Time ◽  
Weight Variation ◽  
Zero Order Release ◽  
Gum Kondagogu ◽  
Ellman’S Method

Present work focused on thiolation for enhancing the mucoadhesive potential of Gum kondagogu (GK). Thiolation of GK was done by esterification process with 80 % thioglycolic acid in presence of 7N HCl. Thiolated Gum kondagogu (ThioGK) was determined to possess 1.59 ±0.04 mmol of thiol groups/g of the polymer by Ellman’s method. ThioGK was characterized by FTIR, NMR, DSC, XRD, and FE-SEM. The tablets were prepared by direct compression using 75 mg of ThioGK and GK. Tablets containing ThioGK (F1) and GK (F2) were subjected to evaluation of weight variation, hardness and friability and show enhanced disintegration time, swelling behavior, drug release and mucoadhesion. In vitro drug release of batch F1 exhibits complete release of drug in 24 hr with zero order release kinetics. Comparative mucoadhesive strength was studied using chicken ileum by texture analyzer and revealed higher mucoadhesion of tablet containing ThioGK. From the above study, ThioGK was suitability exploited as mucoadhesive sustained release matrix tablet.

scholarly journals Formulation and investigation of crushed puffed rice-chitosan-HPMC based polymeric blends as carrier for sustained stomach specific drug delivery of piroxicam using 3(2) Taguchi mathematical design studies

2018 ◽  
Vol 6 (11) ◽  
pp. 61-80 ◽  
Author(s):  
Shashank Soni ◽  
Veerma Ram ◽  
Anurag Verma
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Hydroxypropyl Methylcellulose ◽  
Research Work ◽  
Pharmaceutical Journal ◽  
Weight Variation ◽  
Zero Order Release ◽  
Puffed Rice

In the present experimental investigation an attempt has been made to assess the utility of Crushed Puffed Rice (CPR)-High Molecular Weight Chitosan (HMWCH)-Hydroxypropyl Methylcellulose K15M (HPMC K15M) as a polymeric carrier for the sustained stomach delivery of Piroxicam (PRX). A total of nine formulations were prepared by using 3 (2) Taguchi factorial design, physically blending drug and polymer(s) followed by encapsulation into hard gelatin capsules size 1. The prepared capsules were evaluated for various performance such as weight variation, drug contents, in vitro buoyancy and drug release in 0.1 M HCl. The effect of drug loading on in vitro performance of the formulations was also determined. Crushed puffed rice (CPR) remained buoyant for up to average time span of 06 hr as an unwetted irregular mass in 0.1 M HCl. However, when combined with HMWCH or HPMC K15M or HPMC K15M + HMWCH a low -density cylindrical raft type hydrogel was formed which remained buoyant for up to 12 hr and released up to 99% drug in a sustained manner from 8 to 12 hr following zero order release kinetics. It was also observed that drug release from drug + CPR matrices followed Fickian mechanism. Combination of CPR + HMWCH or HMWCH + HPMC K15M also follows Fickian mechanism. Obtained data from the research work suggests that CPR in combination with HMWCH or HPMC K15M or HPMC has sufficient potential to be used as a carrier for stomach specific delivery of gastric irritant drug like PRX.Soni et al., International Current Pharmaceutical Journal, April 2018, 6(11): 61-80http://www.icpjonline.com/documents/Vol6Issue11/01.pdf

scholarly journals FORMULATION AND EVALUATION OF METOCLOPRAMIDE HCL RECTAL SUPPOSITORIES

2019 ◽  
Author(s):  
Deborah Ejiogu Chioma ◽  
Felix Sunday Yusuf
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Diffusion Mechanism ◽  
In Vitro Release ◽  
Content Uniformity ◽  
Disintegration Time ◽  
Weight Variation ◽  
Rectal Suppositories ◽  
Vitro Release

Metoclopramide hydrochloride is a dopamine receptor antagonist, used mostly for stomach and esophageal problems as it is a prokinetic agent. The aim of the present study was to design and evaluate the suppositories of Metoclopramide HCl.  Six different, rectal suppositories were developed by fusion (pour-moulding) method by employing various hydrophilic and hydrophobic polymeric bases like gelatin, PEG-400 and hydrogenated vegetable oil using propylene glycol as plasticizer and beeswax as hardening agent.  Metoclopramide HCl suppositories were evaluated for appearance, weight variation, drug content uniformity, liquefaction time and temperature, micro-melting range, disintegration and in-vitro release study.  The in-vitro release rate data was evaluated statistically and was found that from all the formulations the drug release is by diffusion mechanism. Optimum formulation of batch S1 has shown 83.427% Metoclopramide HCl in a study of 2 hrs. These drug release results are supported by the disintegration time of suppositories. Lesser the disintegration time faster the drug release. All formulations has shown zero, first and Higuchi release kinetics. The result suggests that the Metoclopramide HCl suppositories can be prepared by employing hydrophilic and hydrophobic polymers.

scholarly journals COMPARATIVE BIOEQUIVALENCE STUDIES OF CINNARIZINE AND ITS DIFFERENT AVAILABLE MARKETED FORMULATION DRUGS

2020 ◽  
pp. 209-215
Author(s):  
SANJEEV KUMAR ◽  
AMIN MIR M ◽  
SARVESH KUMAR ◽  
ANUJ KUMAR
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Dissolution ◽  
H1 Receptor ◽  
Disintegration Time ◽  
Standard Curve ◽  
Weight Variation ◽  
H1 Receptor Antagonist ◽  
Kinetics Of

Objective: The main focus of the study was to investigate the marketed formulations of cinnarizine and it is marketed analogous. Methods: The study involved the analysis of basic pre-formulation studies, namely, physical properties, melting point, Fourier-transform infrared, loss on drying, assay of cinnarizine, standard curve, and partition co-efficient of various marketed tablets of cinnarizine. Results: Cinnarizine is an H1-receptor antagonist drug which is widely used for the treatment of dynamical sickness, vomiting, and vertigo. In this study, five known marketed formulations of cinnarizine were evaluated for weight variation, hardness, drug content, friability, disintegration time, and in vitro dissolution as well as the drug release kinetics of the tablets. As per the study, the drugs show low disintegration time and good hardness, also in vitro dissolution studies have shown near about 90% drug release at the end of the first 10 min and then cumulative drug release of not less than 92% in the nearby 10 min. Hence, these formulations show lower friability, acceptable taste, and shorter disintegration time which make them suitable to be accepted. Thus, the tablets are good for the use, so allow them to be marketed for the wellbeing of humans. Conclusion: It had been found that all the tablets show acceptable limits for various parameters of analysis, in a sustained manner. Thus, all the tablets are effective for usage under standard conditions.

Formulation and Evaluation of Atenolol and Indapamide SR Matrix Tablets for Treatment of Hypertension

2014 ◽  
Vol 7 (2) ◽  
pp. 2450-2458
Author(s):  
Sarika Pundir ◽  
Ashutosh Badola
Keyword(s):  
Kinetic Studies ◽  
Film Coating ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Simultaneous Estimation ◽  
Matrix Tablet ◽  
Release Agent ◽  
Disintegration Time ◽  
Weight Variation

In the present study we have formulated (F1 to F6) matrix tablets of atenolol and indapamide for the management of hypertension. As in simultaneous estimation of these drugs it was found that a confined release can be formulated. In the formulation of SR matrix tablet by using different concentration of delayed release agent DCP and pregelatinized starch as disintegrant we prepared tablets by wet granulation method. For sustained release action HPMC polymers were used for film coating. Preformulation studies were performed prior to compression. The compressed SR matrix tablets were evaluated for weight variation, hardness, friability, drug content, disintegration time and in vitro drug release using USP dissolution apparatus type 2 (paddle). It was found that the optimized formulation showed 49.33%, 48.90%, 48.52%, 47.65%, 46.84% and 46.51% release for atenolol in 12 hours respectively. However, indapamide released 49.62%, 49.39%, 48.72%, 48.27%, 47.59% and 47.36% at the end of 12 hr. The IR spectrum study revealed that there is no disturbance in the principal peaks of pure drugs atenolol and indapamide. This confirms the integrity of pure drugs and no incompatibility of them with excipients. The stability studies were carried out for the optimized batch for one months and it showed satisfactory results. The kinetic studies of the formulations revealed that diffusion is the predominant mechanism of drug and release follows Zero-order, Super case II transport.

Formulation and Evaluation of Orally Disintegrating Tablets of Lamotrigine

2015 ◽  
Vol 8 (2) ◽  
pp. 2881-2888
Author(s):  
Sudarshan Singh ◽  
S S Shyale ◽  
P Karade
Keyword(s):  
Drug Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium

The aim of this study was to design orally disintegrating tablet (ODT) of Lamotrigine. It is an Antiepileptic drug which is widely used in epilepsy. It is also used in simple and complex partial seizures and secondary generalized tonic-clonic seizures. It is poorly water soluble drug (0.46 mg/ml). Thus, an attempt was made to enhance the water solubility by complexation with β-cyclodextrin (1:1 molar ratios). The orally disintegrating tablet of lamotrigine was prepared by direct compression method using different concentration of superdisintegrants such as Sodium starch glycollate, croscarmellose sodium by sublimating agent such as camphor. The formulations were evaluated for weight variation, hardness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies. The prepared tablets were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The disintegration time for the complexed tablets prepared by different concentration of superdisintegrants was found to be in range of 32.54 ± 0.50 to 55.12 ± 0.57 sec and wetting time of the formulations was found to be in range of 28.47 ± 0.67 to 52.19 ± 0.72 sec. All the formulation showed almost 100 percent of drug release within 15 min. Among all the formulation F6 and F7 prepared with 18% croscarmellose sodium and camphor shows faster drug release, respectively 10 min, F6 gives good result for disintegration time, drug release, wetting time and friability. Further formulations were subjected to stability testing for 30 days at temperature of 40 ± 5 ºC/75 ± 5 %RH. Tablets showed no appreciable changes with respect to physical appearance, drug content, disintegration time and dissolution profiles. Results were statistically analyzed by one-way ANOVA at a p < 0.05. It was found that, the data at any point of time are significant at p < 0.05.

Development and Evaluation of Trans Buccal Patches based on Natural and Synthetic Polymers Loaded with Rivastigmine using Solvent Casting Technique

2021 ◽  
pp. 5133-5140
Author(s):  
Prasanta Kumar Mohapatra ◽  
Boddu Pavan Kumar ◽  
Pankaj Singh Patel ◽  
Harish Chandra Verma ◽  
Satyajit Sahoo
Keyword(s):  
Drug Release ◽  
Kinetic Equations ◽  
Moisture Loss ◽  
Release Mechanism ◽  
Solvent Casting ◽  
Casting Technique ◽  
Weight Variation ◽  
Zero Order Release ◽  
Buccal Films

Mucoadhesive buccal films of rivastigmine were prepared by the solvent casting technique using HPMC K15M, sodium alginate, glycerine, and Eudragit RL100. Arranged films assessed for weight variation, thickness, % drug substance, % moisture loss, % moisture take-up, folding endurance, in-vitro medicament release, and Fourier transform Infrared spectroscopy (FTIR). The films showed a controlled release (CR) over 8 h. The preparation observed to be a worthy candidate for the development of buccal patches for therapeutic purposes. Drug-polymer compatibility considers FTIR demonstrated no contradiction between the medicament and the polymers. The optimized formulation found F7 indicated drug release 85% at the end of 8 h. Thinking about the correlation coefficient (R2) values got from the kinetic equations, the drug release from the formulations F1-F8 has discovered zero-order release mechanism. It can be concluded that oral buccal patches of rivastigmine, for treatment of Alzheimer’s and Parkinson’s disease, can be formulated. The study suggests that rivastigmine can be conveniently administered orally in the form of buccal patches, with the lesser occurrence of its side effects and improved bioavailability.

scholarly journals FORMULATION AND EVALUATION OF FLURBIPROFEN FAST DISINTEGRATING TABLETS USING NATURAL SUPERDISINTEGRANTS

2016 ◽  
Vol 9 (6) ◽  
pp. 247 ◽  
Author(s):  
Mohammed Sarfaraz ◽  
Surendra Kumar Sharma
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
Lepidium Sativum ◽  
Disintegration Time ◽  
Natural Sources ◽  
Weight Variation ◽  
Wetting Time ◽  
Tapped Density ◽  
Fast Disintegrating Tablets

ABSTRACTObjective: The main objective of this research was to formulate Fast disintegrating tablets of Flurbiprofen incorporating superdisintegrants, isolated from natural sources like Plantago ovata (PO) seeds, Lepidium sativum (LS) seeds and agar-agar.Methods: Superdisintegrants were isolated from their natural sources using reported methods. Swelling index and hydration capacity was determined for the natural superdisintegrants to know their disintegration capacity. The tablet formulations were designed using isolated natural superdisintegrants. The powder blends were evaluated for pre-compressional parameters like angle of repose, bulk density, tapped density, carr’s index, and hausner’s ratio. Fast disintegrating tablets were prepared by direct compression method. The compressed tablets were characterized for post compression parameters.Results: All formulations had hardness, friability, weight variation and drug content within the pharmacopoeial limits. The wetting time was 84 to 254 sec, in vitro disintegration time was between 59.2 to 221 sec, and in-vitro drug release was as low as 11.80% (LS1) to a maximum of 98.99% (PO4) after 4 min of study. Among all, optimized formulation was PO4, as it showed good wetting time (84 sec), fastest disintegration time (59.2 sec), dispersion time (135 sec) and drug release of 98.99.% within 4 min.Conclusion: Flurbiprofen FDT’s were successfully developed using isolated natural disintegrants. The natural disintegrants isolated showed promising results and can prove as effective alternative for synthetic disintegrants.

scholarly journals FORMULATION AND EVALUATION OF ORAL FAST DISINTEGRATING TABLET OF IBUPROFEN USING TWO SUPER DISINTEGRANTS

2017 ◽  
Vol 9 (4) ◽  
pp. 92
Author(s):  
Hrishav Das Purkayastha ◽  
Bipul Nath
Keyword(s):  
Drug Release ◽  
Magnesium Stearate ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Rapid Release ◽  
Weight Variation ◽  
Fast Disintegrating Tablet

Objective: The aim of the present investigation was to design and evaluate orally disintegrating tablet (ODT) of Ibuprofen, a NSAID drug used for the treatment of arthritis with a view to improve its oral bioavailability. The focus of the current study was to develop ODT of Ibuprofen using super disintegrants for ease of administration and its physicochemical characterization.Methods: Tablets were made from blends by direct compression method. All the ingredients were passed through mesh no. 80. All the ingredients were co-ground in a pestle motor. The resulting blend was lubricated with magnesium stearate and compressed into tablets using the Cadmach single punch (round shaped, 8 mm thick) machine.Results: Physicals parameters of the prepared tablets like Hardness, Weight variation, Friability, thickness, drug content etc. found within the limits. The disintegration time of prepared ODTs was in the range of 45 to 55 seconds. In vitro dispersion time was found to be 22 to 52 seconds which may be attributed to faster uptake of water due to the porous structure formed by super disintegrants. Short disintegration and faster release of ibuprofen were observed with Cross carmellose sodium as compared to sodium starch glycollate.Conclusion: It is concluded that F3 offered the relatively rapid release of Ibuprofen when compared with other formulations. The increase in the concentrations of super disintegrants may lead to increase in the drug release. The formulation prepared with cross carmellose sodium was offered the relatively rapid release of Ibuprofen when compared with other concentrations of both the super disintegrant. 

scholarly journals Formulation and In Vitro Evaluation of Sustained Release Floating Matrix Tablet of Levofloxacin by Direct Compression Method

2019 ◽  
Vol 9 (4-s) ◽  
pp. 398-403
Author(s):  
Nidhi Kumari Pandey ◽  
Sailesh Kumar Ghatuary ◽  
Amit Dubey ◽  
Prabhat Kumar Jain
Keyword(s):  
Drug Release ◽  
Acute Infection ◽  
Methyl Cellulose ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Compression Method ◽  
Weight Variation

The objective of the present work was to develop Gastro retentive dosage forms which would remain in the stomach and upper part or GIT for a prolonged period of time thereby maximizing the drug release at desired site within the time before GRDFs left the stomach and upper part of the GIT, has provoked a great deal of increased interest in the formulation of such drug as floating drug delivery systems. Levofloxacin, (BCS class I) is a fluoroquinolone anti-bacterial agent. The rationale for the formulation of floating matrix tablet are acidic solubility of levofloxacin, residence of Halicobactor pylori mainly in sub region of stomach and the overdosing associated adverse effect due to continuous intake of drug in acute infection. A simple visible spectrophotometric method was employed for the estimation of levofloxacin at 294 nm and Beer’s law is obeyed in the concentration range of 2-10 μg /ml. Floating matrix tablet of levofloxacin was prepared by direct compression method using different polymers like hydroxyl propyl methyl cellulose (HPMC K4) and carbopol 934 as matrix formation polymers, sodium bicarbonate and citric acid was used as gas generating agents. The FTIR spectra of the levofloxacin and other excipients alone and in combination show the compatibility of the drug and excipients. Six formulations of different polymer percentages were formulated (F1-F6). Pre-compression parameters were evaluated. The influence of matrix forming agents and binary mixtures of them on levofloxacin release was investigated. The formulated tablets were characterized by hardness, friability, thickness, weight variation and in vitro drug release. The formulated tablets had acceptable physicochemical characters. The data obtained from the in-vitro dissolution studies of optimized batch F4were fitted in different models. The optimized formulation F4 showed 99.25% drug content and swelling index of 79.85 %. Drug release mechanism was found to be first order kinetics. Levofloxacin floating tablets exhibited increased gastric residence time, there by improved bioavailability and therapeutic effect of the drug.  

scholarly journals FABRICATION AND CHARACTERIZATION OF FAST DISSOLVING FILMS OF ECLIPTA PROSTRATE LEAVES EXTRACT TO TREAT MOUTH ULCERS

2021 ◽  
pp. 263-271
Author(s):  
MANIKIRAN S. S. ◽  
NAGAM SANTHI PRIYA ◽  
B. AUBINE MOLLY ◽  
LAKSHMI PRASANTHI NORI
Keyword(s):  
Drug Release ◽  
Moisture Loss ◽  
Disintegration Time ◽  
Weight Variation ◽  
Eclipta Prostrata ◽  
Release Studies ◽  
Study Results ◽  
The Stability ◽  
Oral Films

Objective: This research focused on the design of fast dissolving herbal film of Eclipta Prostrate leaves extract for mouth ulcers. Methods: The extract of Eclipta Prostrata leaves was formulated as films by solvent casting method using various polymers viz., HPMC E5, HPMC E15, sodium alginate and PVA. The films were designed by using propylene glycol as a plasticizer, SSG as super disintegrate and honey as a sweetener. Furthermore, the films were evaluated for thickness, folding endurance, weight variation, % elongation, surface pH, % moisture uptake, % moisture loss, disintegration and in vitro drug release study. Results: The revealed that all the films were good in appearance and had a smooth texture. Out of all ten formulations, F3 and F5 disintegrated rapidly with a disintegration time of 27 and 32 seconds. The drug release studies revealed that all the formulations had a good release profile, but the F3 formulation showed rapid release i.e. 83.57% in 4 min. The stability studies revealed that the formulations F3 and F5 were found good with non-tackiness, easily separable and disintegrated at 29 and 33 sec respectively with no appearance and drug release. Conclusion: The research revealed that Eclipta prostrate leaves extract can be formulated into oral films for the treatment of mouth ulcers with improved bioavailability and expected patient compliance.

Sign in / Sign up

Export Citation Format

Share Document