The Impact of Natural Gas Imports on Air Pollutant Emissions in Mexico

1993 ◽  
Vol 14 (3) ◽  
Author(s):  
Alberto Bustani ◽  
Elisa Cobas
Keyword(s):  
Natural Gas ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
The Impact

EDGAR v5.0: a tool to evaluate the influence of technology incorporation and regulatory frameworks on global greenhouse gases and air pollutant emissions.

2020 ◽  
Author(s):  
Gabriel David Oreggioni ◽  
Fabio Monforti-Ferraio ◽  
Monica Crippa ◽  
Edwin Schaaf ◽  
Diego Guizzardi ◽  
...  
Keyword(s):  
Natural Gas ◽  
Developing Economies ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
Pollutant Emission ◽  
Partial Replacement ◽  
Low Carbon ◽  
Regulatory Frameworks ◽  
Efficient Power ◽  
The Impact

<p>During the last 30 years, the global energy sector has undergone through significant transformation, delivering a considerably larger electricity output whilst attempting to reduce air pollutant and greenhouse gas emissions. The international community has tackled this challenging dilemma by implementing different kind of policies and by encouraging several types of technological changes; including the partial replacement of coal and liquid fossil fuels by low carbon energy vectors (natural gas and renewable sources), the incorporation of more efficient power trains (natural gas fired combined cycles and supercritical coal fired plants) and the deployment of primary and secondary treatment processes for limiting air pollutant concentration in flue gases.<br>EDGAR is a unique global emission database due to its high sectorial, technological and geographical coverage; reporting greenhouse and air pollutant emission time series (1970-nowadays) in a very detailed way. Research is currently being conducted, aimed at updating the energy conversion and end of pipe processes so that the quantified emissions can better reflect the latest global and regional changes. By using EDGAR new data, it is possible to evaluate the impact of technology and regulatory frameworks on air pollutant emissions as well as to identify possible co-benefits and trade off associated with climate change mitigation policies for the energy industries.<br>This work is intended to study the drivers for greenhouse and air pollutant emission trends within this sector - both in large emitting developed and developing economies; by focusing on the role of  demand increase, on the penetration of non-fossil sources and specially on the incorporation of more efficient power islands, combustion and air pollutant abatement units.</p>

3-Way Catalyst Testing at VTT Energy

2003 ◽  
Author(s):  
John Sartain ◽  
Don Newburry ◽  
Mikko Pitkanen ◽  
Markku Ikonen
Keyword(s):  
Natural Gas ◽  
Phase 1 ◽  
Nox Reduction ◽  
Oil And Gas Industry ◽  
The United States ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
Research Centre ◽  
Low Oxygen ◽  
Crossover Point

Emissions regulations on stationary, natural gas fired reciprocating engines are becoming increasingly tighter throughout the United States. In addition to lower NOx, CO and hydrocarbon limits, regulation of HAP (Hazardous Air Pollutant) emissions has become more prevalent. Rich burn (stoichiometric) natural gas engines are widely used in the oil and gas industry, as well as in distributed power generation. Due to the low oxygen content in the exhaust, these engines are suitable for 3-Way catalyst, which simultaneously reduces NOx and oxidizes CO and hydrocarbons. A series of 3-Way catalyst tests were conducted on a small natural gas engine at the VTT Technical Research Centre in Espoo, Finland. The overall goals of the testing were to determine the ability of various 3-Way catalysts to meet California emissions regulations and to gather data on HAPs emission reductions. The testing was carried out in two phases. In phase 1, several fresh catalysts were tested at the NOx/CO crossover point (i.e., the point where CO and NOx reduction percent is approximately equal) by using an air/fuel ratio controller to keep the exhaust oxygen level constant. Detailed emissions measurements of both regulated and unregulated emissions were taken. The measurements included NOx, CO, hydrocarbon species, CH2O, N2O, NH3, and H2. In phase 2, the effects of exhaust lambda variation on NOx and CO were studied in more detail, with aged catalyst. Also, different engine loads were tested to vary the space velocity and temperature. This paper describes the testing in more detail and presents some of the resulting data.

scholarly journals The Affordable Clean Energy rule and the impact of emissions rebound on carbon dioxide and criteria air pollutant emissions

2019 ◽  
Vol 14 (4) ◽  
pp. 044018 ◽  
Author(s):  
Amelia T Keyes ◽  
Kathleen F Lambert ◽  
Dallas Burtraw ◽  
Jonathan J Buonocore ◽  
Jonathan I Levy ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Clean Energy ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
The Impact

scholarly journals Impact of Control Measures on Nitrogen Oxides, Sulfur Dioxide and Particulate Matter Emissions from Coal-Fired Power Plants in Anhui Province, China

Atmosphere ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 35 ◽  
Author(s):  
Haitao Dai ◽  
Dawei Ma ◽  
Renbin Zhu ◽  
Bowen Sun ◽  
Jun He
Keyword(s):  
Particulate Matter ◽  
Sulfur Dioxide ◽  
Nitrogen Oxides ◽  
River Basin ◽  
Power Plants ◽  
Air Pollutant ◽  
Control Measures ◽  
Pollutant Emissions ◽  
Huai River ◽  
The Impact

Anhui is one of the highest provincial emitters of air pollutants in China due to its large coal consumption in coal-fired plants. In this study, the total emissions of nitrogen oxides (NOx), sulfur dioxide (SO2) and particulate matter (PM) from coal-fired power plants in Anhui were investigated to assess the impact of control measures on the atmospheric emissions based upon continuous emission monitoring systems (CEMS). The total NOx, SO2 and PM emissions significantly decreased from 2013 to 2017 and they were estimated at 24.5 kt, 14.8 kt and 3.0 kt in 2017, respectively. The emission reductions of approximately 79.0%, 70.1% and 81.2% were achieved in 2017 compared with a 2013 baseline, respectively, due to the application of high-efficiency emission control measures, including the desulfurization, denitration and dust-removing devices and selective catalytic reduction (SCR). The NOx, SO2 and PM emission intensities were 0.125 g kWh−1, 0.076 g kWh−1 and 0.015 g kWh−1 in 2017, respectively, which were lower than the average of national coal-fired units. The coal-fired units with ≥600 MW generated 80.6% of the total electricity amount while they were estimated to account for 70.5% of total NOx, 70.1% of total SO2 and 71.9% of total PM. Their seasonal emissions showed a significant correlation to the power generation with the maximum correlation found in summer (July and August) and winter (January and December). The major regional contributors are the cities along the Huai River Basin and Yangtze River Basin, such as Huainan, Huaibei, Tongling, Maanshan and Wuhu, and the highest emission occurred in Huainan, accounting for approximately 26–40% of total emission from all the power plants. Our results indicated that the application of desulfurization, denitration and dust-removing devices has played an important role in controlling air pollutant emissions from coal-fired power plants.

Design Improvement Survey for NOx Emissions Reduction of a Heavy-Duty Gas Turbine Partially Premixed Fuel Nozzle Operating With Natural Gas: Experimental Campaign

2015 ◽  
Author(s):  
Matteo Cerutti ◽  
Roberto Modi ◽  
Danielle Kalitan ◽  
Kapil K. Singh
Keyword(s):  
Pressure Drop ◽  
Natural Gas ◽  
Gas Turbine ◽  
Pollutant Emissions ◽  
Nox Emissions ◽  
Heavy Duty ◽  
Fuel Nozzle ◽  
Partially Premixed ◽  
Heavy Duty Gas Turbine ◽  
The Impact

As government regulations become increasingly strict with regards to combustion pollutant emissions, new gas turbine combustor designs must produce lower NOx while also maintaining acceptable combustor operability. The design and implementation of an efficient fuel/air premixer is paramount to achieving low emissions. Options for improving the design of a natural gas fired heavy-duty gas turbine partially premixed fuel nozzle have been considered in the current study. In particular, the study focused on fuel injection and pilot/main interaction at high pressure and high inlet temperature. NOx emissions results have been reported and analyzed for a baseline nozzle first. Available experience is shared in this paper in the form of a NOx correlative model, giving evidence of the consistency of current results with past campaigns. Subsequently, new fuel nozzle premixer designs have been investigated and compared, mainly in terms of NOx emissions performance. The operating range of investigation has been preliminarily checked by means of a flame stability assessment. Adequate margin to lean blow out and thermo-acoustic instabilities onset has been found while also maintaining acceptable CO emissions. NOx emission data were collected over a variety of fuel/air ratios and pilot/main splits for all the fuel nozzle configurations. Results clearly indicated the most effective design option in reducing NOx. In addition, the impact of each design modification has been quantified and the baseline correlative NOx emissions model calibrated to describe the new fuel nozzles behavior. Effect of inlet air pressure has been evaluated and included in the models, allowing the extensive use of less costly reduced pressure test campaigns hereafter. Although the observed effect of combustor pressure drop on NOx is not dominant for this particular fuel nozzle, sensitivity has been performed to consolidate gathered experience and to make the model able to evaluate even small design changes affecting pressure drop.

Impact of Fuel Composition on Blow Off and Flashback in Swirl Stabilized Lean Premixed Combustion

2013 ◽  
Author(s):  
Amin Akbari ◽  
Vincent McDonell ◽  
Scott Samuelsen
Keyword(s):  
Natural Gas ◽  
Gas Turbines ◽  
Operating Conditions ◽  
Combustion Stability ◽  
Pollutant Emissions ◽  
Fuel Composition ◽  
Pure Hydrogen ◽  
Combustion Properties ◽  
Lean Premixed ◽  
The Impact

Co firing of natural gas with renewable fuels such as hydrogen can reduce greenhouse gas emissions, and meet other sustainability considerations. At the same time, adding hydrogen to natural gas alters combustion properties, such as burning speeds, heating values, flammability limits, and chemical characteristics. It is important to identify how combustion stability relates to fuel mixture composition in industrial gas turbines and burners and correlate such behavior to fuel properties or operating conditions. Ultimately, it is desired to predict and prevent operability issues when designing a fuel flexible gas turbine combustor. Fuel interchangeability is used to describe the ability of a substitute fuel composition to replace a baseline fuel without significantly altering performance and operation. Any substitute fuel, while maintaining the same heating load as the baseline fuel, must also provide stable combustion with low pollutant emissions. Interchangeability indices try to predict the impact of fuel composition on lean blowoff and flashback. Correlations for operability limits have been reported, though results are more consistent for blowoff compared to flashback. Yet, even for blowoff, some disagreement regarding fuel composition effects are evident. In the present work, promising correlations and parameters for lean blow off and flashback in a swirl stabilized lean premixed combustor are evaluated. Measurements are conducted for fuel compositions ranging from pure natural gas to pure hydrogen under different levels of preheat and air flow rates. The results are used to evaluate the ability of existing approaches to predict blowoff and flashback. The results show that, while a Damköhler number approach for blowoff is promising, important considerations are required in applying the method. For flashback, the quench constant parameter suggested for combustion induced vortex breakdown was applied and found to have limited success for predicting flashback in the present configuration.

Formaldehyde Formation in Large Bore Engines Part 2: Factors Affecting Measured CH2O

1999 ◽  
Vol 122 (4) ◽  
pp. 611-616 ◽  
Author(s):  
Daniel B. Olsen ◽  
Charles E. Mitchell
Keyword(s):  
Natural Gas ◽  
Air Pollutant ◽  
Operating Conditions ◽  
Factors Affecting ◽  
Natural Gas Engines ◽  
Spark Timing ◽  
Wide Range ◽  
Hazardous Air Pollutant ◽  
Relationship Of ◽  
The Impact

Current research shows that the only hazardous air pollutant of significance emitted from large bore natural gas engines is formaldehyde CH2O. A literature review on formaldehyde formation is presented focusing on the interpretation of published test data and its applicability to large bore natural gas engines. The relationship of formaldehyde emissions to that of other pollutants is described. Formaldehyde is seen to have a strong correlation to total hydrocarbon (THC) level in the exhaust. It is observed that the ratio of formaldehyde to THC concentration is roughly 1.0–2.5 percent for a very wide range of large bore engines and operating conditions. The impact of engine operating parameters, load, rpm, spark timing, and equivalence ratio, on formaldehyde emissions is also evaluated. [S0742-4795(00)01004-8]

scholarly journals The impact of road transport emissions on air quality in Brăila, Romania

2021 ◽  
Vol 15 (2) ◽  
pp. 5-14
Author(s):  
Carmelia Mariana Dragomir Balanica ◽  
Ciprian Cuzmin ◽  
Cecilia Serban ◽  
Cristian Muntenita
Keyword(s):  
Total Population ◽  
Road Transport ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
Pollutant Emission ◽  
Road Vehicles ◽  
Individual Mobility ◽  
Pm2.5 And Pm10 ◽  
Transport Emissions ◽  
The Impact

Road transport, including accessibility and individual mobility is considered unanimously as a fundamental element of contemporary living. The study area is considering Braila County with a total population of around over 305,000. The area it is well served by 6 national roads, 27 county roads and 42 communal roads and contains some of the most heavily trafficked stretches of road in the Romania. The emissions analysed in this study CH4, CO, CO2, N2O, NH3, NOx, PM2.5 and PM10, were collected by the Agency for Environmental Protection Braila during 2015-2019 based on questionnaires according to EMEP/EEA air pollutant emission inventory guidebook. The highest level of pollutant emissions was recorded in 2017, more exactly 191714,5 Megatons. In this article we analysed five categories of pollution sources: Passenger car, Light commercial trucks, Heavy-duty vehicles, Motorcycles and Non - Road vehicles and other mobile equipment. With the exception of CO2, N2O and NH3, pollutant emissions decreased for the eight pollutants analysed.

Sign in / Sign up

Export Citation Format

Share Document