Eco-Friendly Green Liquid Chromatographic Determination of Azelastine in the Presence of its Degradation Products: Applications to Degradation Kinetics

2019 ◽  
Vol 102 (1) ◽  
pp. 81-90 ◽  
Author(s):  
Amal A El-Masry ◽  
Mohammed E A Hammouda ◽  
Dalia R El-Wasseef ◽  
Saadia M El-Ashry
Keyword(s):  
Degradation Products ◽  
Degradation Kinetics ◽  
Sodium Dodecyl ◽  
Internal Standard ◽  
Eye Drops ◽  
Control Analysis ◽  
Stability Indicating ◽  
Highly Sensitive ◽  
Antihistaminic Drug

Abstract Background: Green solvents such as microemulsion were used in the proposed method because they play a vital role in the analytical method’s influence on the environment. Objective: A highly sensitive, specific, and validated stability-indicating eco-friendly green microemulsion liquid chromatography (MELC) method was developed for separation of the antihistaminic drug Azelastine HCl (AZL) from its degradation products with application to degradation kinetics. Methods: Chromatographic separation was operated on a C18 column with a microemulsion mobile phase, which consists of 0.1 M sodium dodecyl sulphate, 10% n-propanol, 1% n-octanol, and 0.3% triethylamine, by using 0.02 M phosphoric acid at pH 3.5 and irbesartan as internal standard. The eluted compounds were monitored at 210 nm with flow rate 1 mL/min at ambient temperature. Results: A linear dependence of the peak area on drug concentration over the concentration range of 0.1 to 25 μg/mL was achieved with an LOD of 0.04 μg/mL and an LOQ of 0.10 μg/mL. Moreover, the proposed method was successfully applied for determination of AZL in eye drops and metered dose nasal inhaler as well as to study the kinetics of alkaline, acidic, neutral, oxidative, and photolytic degradation processes of AZL according to the International Council for Harmonization guidelines. Conclusions: The proposed method could be used as a harmless alternative for quality control analysis of the mentioned drug, without interference from dosage form additives or decomposition products. Highlights: A highly sensitive stability-indicating eco-friendly green MELC method was developed for the separation of the antihistaminic drug AZL from its degradation products.

ICH/FDA Guidelines-Compliant Validated Stability-Indicating HPLC-UV Method for the Determination of Axitinib in Bulk and Dosage Forms

2020 ◽  
Vol 16 (8) ◽  
pp. 1106-1112
Author(s):  
Ibrahim A. Darwish ◽  
Nasr Y. Khalil ◽  
Mohammad AlZeer
Keyword(s):  
High Performance ◽  
Kinase Inhibitor ◽  
Degradation Products ◽  
Internal Standard ◽  
Dosage Forms ◽  
Uv Detector ◽  
Stability Indicating ◽  
Therapeutic Benefits ◽  
Relative Standard

Background: Axitinib (AXT) is a member of the new generation of the kinase inhibitor indicated for the treatment of advanced renal cell carcinoma. Its therapeutic benefits depend on assuring the good-quality of its dosage forms in terms of content and stability of the pharmaceutically active ingredient. Objective: This study was devoted to the development of a simple, sensitive and accurate stabilityindicating high-performance liquid chromatographic method with ultraviolet detection (HPLC-UV) for the determination of AXT in its bulk and dosage forms. Methods: Waters HPLC system was used. The chromatographic separation of AXT, internal standard (olaparib), and degradation products were performed on the Nucleosil CN column (250 × 4.6 mm, 5 μm). The mobile phase consisted of water:acetonitrile:methanol (40:40:20, v/v/v) with a flow rate of 1 ml/min, and the UV detector was set at 225 nm. AXT was subjected to different accelerated stress conditions and the degradation products, when any, were completely resolved from the intact AXT. Results: The method was linear (r = 0.9998) in the concentration range of 5-50 μg/ml. The limits of detection and quantitation were 0.85 and 2.57 μg/ml, respectively. The accuracy of the method, measured as recovery, was in the range of 98.0-103.6% with relative standard deviations in the range of 0.06-3.43%. The results of stability testing revealed that AXT was mostly stable in neutral and oxidative conditions; however, it was unstable in alkaline and acidic conditions. The kinetics of degradation were studied, and the kinetic rate constants were determined. The proposed method was successfully applied for the determination of AXT in bulk drug and dosage forms. Conclusions: A stability-indicating HPLC-UV method was developed and validated for assessing AXT stability in its bulk and dosage forms. The method met the regulatory requirements of the International Conference on Harmonization (ICH) and the Food and Drug Administration (FDA). The results demonstrated that the method would have great value when applied in quality control and stability studies for AXT.

Development and Validation of a Stability-Indicating HPLC-Photodiode Array Detector Method for Formulation Analysis and Degradation Kinetics and Dissolution Studies of Mycophenolate Sodium and HPLC/MS/MS Characterization of its Stress Degradation Products

2013 ◽  
Vol 96 (3) ◽  
pp. 593-598
Author(s):  
Anna Pratima G Nikalje ◽  
Vishnu P Choudhari
Keyword(s):  
Degradation Product ◽  
Degradation Products ◽  
Degradation Kinetics ◽  
Array Detector ◽  
Forced Degradation ◽  
Product Analysis ◽  
Mycophenolate Sodium ◽  
Stability Indicating ◽  
Stress Degradation

Abstract A simple stability-indicating isocratic RP-HPLC method was developed and validated for the determination of mycophenolate sodium and its alkali degradation product. Forced degradation of the drug was carried out under thermolytic, photolytic, acid/base hydrolytic, and oxidative stress conditions. Alkali degradation product DP1 was isolated, and separation of stress degradation products was achieved on a Symmetry C18 (250 × 4.6 mm × 5.0 μm) column using the mobile phase methanol–acetate buffer adjusted with acetic acid to pH 6.0 (76 + 24, v/v) at a 0.55 mL/min flow rate and 50°C. Data were integrated at the detection wavelength of 251 nm. The method validation characteristics included accuracy, precision, linearity, range, specificity, and sensitivity per International Conference on Harmonization guidelines. Robustness testing was conducted to evaluate the effect of minor changes in the chromatographic conditions and to establish appropriate system suitability parameters. Structural elucidation of degraded products was performed by HPLC/MS/MS. The method was used successfully for drug product analysis, dissolution study, and determination of the drug's acid, alkali, and oxidative degradation kinetics.

scholarly journals Stability-indicating RP-HPLC method for determination of beclomethasone dipropionate in nanocapsule suspensions

2015 ◽  
Vol 51 (4) ◽  
pp. 803-810 ◽  
Author(s):  
Janaíne Micheli Chassot ◽  
Luana Mota Ferreira ◽  
Felipe Pereira Gomes ◽  
Letícia Cruz ◽  
Leandro Tasso
Keyword(s):  
Mobile Phase ◽  
Beclomethasone Dipropionate ◽  
Degradation Products ◽  
Degradation Kinetics ◽  
Hplc Method ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Relative Standard ◽  
Bulk Drug

abstract A simple stability-indicating RP-HPLC/UV method was validated for determination of beclomethasone dipropionate (BD) in nanocapsule suspensions. Chromatographic conditions consisted of a RP C18column (250 mm x 4.60 mm, 5 µm, 110 Å), using methanol and water (85:15 v/v) as mobile phase at 1.0 mL/min with UV detection at 254 nm. The calibration curve was found to be linear in the concentration range of 5.0-25.0 µg/mL with a correlation coefficient > 0.999. Precision was demonstrated by a relative standard deviation lower than 2.0%. Accuracy was assessed by the recovery test of BD from nanocapsules (98.03% to 100.35%). Specificity showed no interference from the components of nanocapsules or from the degradation products derived from acid, basic and photolytic conditions. In conclusion, the method is suitable to be applied to assay BD in bulk drug and in nanocapsules, and it can be employed to study stability and degradation kinetics.

scholarly journals Stability Indicating Method for Simultaneous RP HPLC Determination of Camylofin Dihydrochloride and Nimesulide in Pharmaceutical Preparations

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Rajeev Kumar R. Singh ◽  
Manapragada V. Rathnam ◽  
Sangeeta J. Singh ◽  
Raju V. K. Vegesna
Keyword(s):  
Internal Standard ◽  
Pharmaceutical Preparations ◽  
Reversed Phase ◽  
Control Analysis ◽  
Solution Stability ◽  
Buffer Solution ◽  
Solution Ph ◽  
Column Temperature ◽  
Stability Indicating

A simple, fast, and precise reversed phase high-performance liquid chromatographic method has been developed for the simultaneous determination of camylofin dihydrochloride and nimesulide using caffeine as an internal standard. The stability indicating capability of the method was proved by subjecting the drugs to stress conditions as per ICH-recommended test conditions. Separation was achieved using Varian Chromspher 5 C18 column (250 mm × 4.6 mm, 5 μm) as stationary phase with a mobile phase comprising of buffer solution pH 5.0 : methanol (600 : 400, v/v) at a flow rate of 1.0 mL min−1, column temperature of 30∘C and UV detection at 220 nm. The retention time of caffeine, camylofin dihydrochloride, and nimesulide was about 5.0 min, 6.1 min, and 12.7 min, respectively. The proposed method was validated for linearity, accuracy, precision, sensitivity, robustness and solution stability. Linearity, accuracy, and precision were found to be acceptable over the ranges of 250–750 μg mL−1 for Nimesulide and 125–375 μg mL−1 for camylofin dihydrochloride. The test solution was found to be stable for 72 h. It can be conveniently adopted for routine quality control analysis.

Validated Stability-Indicating Capillary Electrophoresis Method for the Separation and Determination of a Fixed-Dose Combination of Carvedilol and Hydrochlorothiazide in Tablets

2013 ◽  
Vol 96 (5) ◽  
pp. 951-959 ◽  
Author(s):  
Nourah Z Alzoman ◽  
Maha A Sultan ◽  
Hadir M Maher ◽  
Mona M AlShehri ◽  
Ileana V Olah
Keyword(s):  
Capillary Electrophoresis ◽  
Degradation Products ◽  
Background Electrolyte ◽  
Internal Standard ◽  
Fused Silica ◽  
Fixed Dose ◽  
Array Detector ◽  
Forced Degradation ◽  
Stability Indicating

Abstract A novel, fast, sensitive, and specific capillary electrophoresis (CE) technique coupled to a diode array detector has been developed for the separation and simultaneous determination of carvedilol (CRV) and hydrochlorothiazide (HCT) in two combination formulations. The proposed method utilized a fused silica capillary (55 cm × 75 μm id) and the background electrolyte solution phosphate buffer (12.5 mM, pH 7.4)–methanol (95 + 5, v/v). The separation was achieved at 30 kV applied voltage and 24°C. Atorvastatin (80 μg/mL) was chosen as the internal standard. The described method was linear over the range of 1–200 and 0.2–150 μg/mL for CRV and HCT, respectively. Intraday and interday RSD (n = 6) was ≤1.4%. The LOD values of CRV and HCT were 0.26 and 0.07 μg/mL, respectively. The validated CE method was successfully applied to the analysis of two commercial tablet dosage forms. Forced degradation studies were performed on bulk samples of the two drugs using thermal, photolytic, hydrolytic, and oxidative stress conditions, and the stressed samples were analyzed by the proposed method. Degradation products produced as a result of stress studies did not interfere with the determination of CRV and HCT; the assay could, therefore, be considered stability-indicating.

scholarly journals A Stability-Indicating HPLC-DAD Method for Determination of Ferulic Acid into Microparticles: Development, Validation, Forced Degradation, and Encapsulation Efficiency

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Jessica Mendes Nadal ◽  
Maria da Graça Toledo ◽  
Yasmine Mendes Pupo ◽  
Josiane Padilha de Paula ◽  
Paulo Vitor Farago ◽  
...  
Keyword(s):  
Ferulic Acid ◽  
Limit Of Detection ◽  
Degradation Products ◽  
Degradation Kinetics ◽  
Forced Degradation ◽  
Detection Accuracy ◽  
Stability Indicating ◽  
Relative Standard ◽  
Polymeric Microparticles

A simple stability-indicating HPLC-DAD method was validated for the determination of ferulic acid (FA) in polymeric microparticles. Chromatographic conditions consisted of a RP C18column (250 mm × 4.60 mm, 5 μm, 110 Å) using a mixture of methanol and water pH 3.0 (48 : 52 v/v) as mobile phase at a flow rate of 1.0 mL/min with UV detection at 320 nm. The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of quantification, limit of detection, accuracy, precision, and robustness provided suitable results regarding all parameters investigated. The calibration curve was linear in the concentration range of 10.0–70.0 μg/mL with a correlation coefficient >0.999. Precision (intraday and interday) was demonstrated by a relative standard deviation lower than 2.0%. Accuracy was assessed by the recovery test of FA from polymeric microparticles (99.02% to 100.73%). Specificity showed no interference from the components of polymeric microparticles or from the degradation products derived from acidic, basic, and photolytic conditions. In conclusion, the method is suitable to be applied to assay FA as bulk drug and into polymeric microparticles and can be used for studying its stability and degradation kinetics.

Stability Indicating Liquid Chromatographic Method for the Determination of Fenofibrate and its Application to Kinetic Studies

2013 ◽  
Vol 5 (4) ◽  
pp. 1866-1874
Author(s):  
K. Srinivasa Rao ◽  
Keshar N K ◽  
N Jena ◽  
M.E.B Rao ◽  
A K Patnaik
Keyword(s):  
Degradation Products ◽  
Kinetic Studies ◽  
Pharmaceutical Formulations ◽  
Assay Method ◽  
Pharmaceutical Dosage Form ◽  
Stability Indicating ◽  
Zero Order Kinetics ◽  
Relative Standard ◽  
Liquid Chromatographic

A stability-indicating LC assay method was developed for the quantitative determination of fenofibrate (FFB) in pharmaceutical dosage form in the presence of its degradation products and kinetic determinations were evaluated in acidic, alkaline and peroxide degradation conditions. Chromatographic separation was achieved by use of Zorbax C18 column (250 × 4.0 mm, 5 μm). The mobile phase was established by mixing phosphate buffer (pH adjusted 3 with phosphoric acid) and acetonitrile (30:70 v/v). FFB degraded in acidic, alkaline and hydrogen peroxide conditions, while it was more stable in thermal and photolytic conditions. The described method was linear over a range of 1.0-500 μg/ml for determination of FFB (r= 0.9999). The precision was demonstrated by relative standard deviation (RSD) of intra-day (RSD= 0.56– 0.91) and inter-day studies (RSD= 1.47). The mean recovery was found to be 100.01%. The acid and alkaline degradations of FFB in 1M HCl and 1M NaOH solutions showed an apparent zero-order kinetics with rate constants 0.0736 and 0.0698  min−1 respectively and the peroxide degradation with 5% H2O2 demonstrated an apparent first-order kinetics with rate constant k = 0.0202 per min. The t1/2, t90   values are also determined for all the kinetic studies. The developed method was found to be simple, specific, robust, linear, precise, and accurate for the determination of FFB in pharmaceutical formulations.  

Sign in / Sign up

Export Citation Format

Share Document