scholarly journals A Study on the Bulletproof Test Standard for Body Armor

2021 ◽  
Vol 22 (11) ◽  
pp. 395-403
Author(s):  
Gu Seung Hwan ◽  
Young Chul Kim ◽  
Joong Hwa Park
Keyword(s):  
Body Armor

Optimization, Alternative Materials and Improvements in Body Armor Shields

2007 ◽  
Author(s):  
R. C. Batra ◽  
G. M. Zhang ◽  
J. Zheng ◽  
G. Gopinath
Keyword(s):  
Body Armor ◽  
Alternative Materials

Self-Cooling Gradient Shell for Body Armor

2012 ◽  
Author(s):  
Igor Luzinov ◽  
Konstantin G. Komev
Keyword(s):  
Body Armor

Layer thickness optimization of ceramic composite for body armor by considering volume, weight, and cost

2021 ◽  
pp. 095440622110157
Author(s):  
Yuksel Palaci ◽  
Mustafa M Arikan
Keyword(s):  
Silicon Nitride ◽  
Boron Carbide ◽  
Layer Thickness ◽  
Ceramic Composite ◽  
Material Selection ◽  
Composite Layer ◽  
Ceramic Materials ◽  
Ternary Diagram ◽  
Body Armor ◽  
Volume Weight

This study investigates visualization of optimized layer thickness with a ternary diagram by considering Volume, Weight, and Cost priorities to determine the composite structure of alternative ceramics to use in body armor application by using the Digital Logic Method (DLM). Three criterion priorities (volume, weight, cost) have been investigated to help designers decide on optimum ceramic material for their applications. Alumina (Al2O3), silicon carbide (SiC), silicon nitride (Si3N4), and boron carbide (B4C) were analyzed and ranked to decide for material selection based on priorities. The analysis results showed that silicon nitride (Si3N4) had the maximum performance index (PI) point (80.0) based on the volume priority. On the other hand, while boron carbide (B4C) had the maximum PI point (76.4) in terms of the weight priority, alumina (Al2O3) was determined to be the best material according to the cost priority. PI point of alumina (Al2O3) was calculated as 100. A ternary diagram was developed for decision-makers to visualize material selection performances. The optimization of the ceramic composite layer thickness of the alternative ceramic materials is visualized by considering three criteria.

Investigations on Dynamic Puncture Behaviors of Integrated Composite Reinforced with Varying Fabrics

2013 ◽  
Vol 365-366 ◽  
pp. 1070-1073 ◽  
Author(s):  
Chia Chang Lin ◽  
Ting Ting Li ◽  
Ching Wen Lou ◽  
Jan Yi Lin ◽  
Jia Horng Lin
Keyword(s):  
Performance Improvement ◽  
Cost Reduction ◽  
Body Armor ◽  
Packaging Materials ◽  
Puncture Resistance ◽  
Fabric Reinforcement ◽  
Number Of Layers ◽  
Layer Composite ◽  
Puncture Force ◽  
And Performance

The dynamic puncture resistance of multi-layer integrated composite which was comprised of glass fabric reinforcement or Kevlar fabric reinforcement and nonwovens were discussed as related to recycled Kevlar fibers amount, number of layer and K-ply position for purpose of cost reduction and performance improvement. The result shows that, 20 wt% Kevlar fibers contained in nonwovens have the optimum puncture resistance. And the dynamic puncture force increases linearly with number of layers, and also improves proportionally as increasing number of K-ply. The resultant multi-layer composite is expected to be used as body armor interlayer and packaging materials.

scholarly journals Analytical investigation of high-velocity impact on hybrid unidirectional/woven composite panels

2016 ◽  
Vol 30 (4) ◽  
pp. 545-563 ◽  
Author(s):  
H Shanazari ◽  
GH Liaghat ◽  
H Hadavinia ◽  
A Aboutorabi
Keyword(s):  
Cross Sections ◽  
Shear Failure ◽  
Failure Criteria ◽  
Analytical Investigation ◽  
Woven Fabrics ◽  
Body Armor ◽  
Ballistic Performance ◽  
Nonwoven Fabrics ◽  
Ballistic Protection ◽  
Maximum Tensile Strain

In addition to fiber properties, the fabric structure plays an important role in determining ballistic performance of composite body armor textile. Textile structures used in ballistic protection are woven fabrics, unidirectional (UD) fabric structures, and nonwoven fabrics. In this article, an analytical model based on wave propagation and energy balance between the projectile and the target is developed to analyze hybrid fabric panels for ballistic protection. The hybrid panel consists of two types of structure: woven fabrics as the front layers and UD material as the rear layers. The model considers different cross sections of surface of the target in the woven and UD fabric of the hybrid panel. Also the model takes into account possible shear failure by using shear strength together with maximum tensile strain as the failure criteria. Reflections of deformation waves at interface between the layers and also the crimp of the yarn are modeled in the woven part of the hybrid panel. The results show greater efficiency of woven fibers in front layers (more shear resistance) and UD yarns in the rear layers (more tensile resistance), leading to better ballistic performance. Also modeling the yarn crimp results in more trauma at the backface of the panel producing data closer to the experimental results. It was found that there is an optimum ratio of woven to UD materials in the hybrid ballistic panel.

Biodynamics of Human Thorax With Body Armors Subject to Bullet Impact

2001 ◽  
Author(s):  
Y. W. Kwon ◽  
J. A. Lobuono
Keyword(s):  
Experimental Data ◽  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Body Armor ◽  
Projectile Impact ◽  
Human Thorax ◽  
Trachea And Bronchi ◽  
Armor System ◽  
The Finite Element Model

Abstract The objective of this study is to develop a finite element model of the human thorax with a protective body armor system so that the model can adequately determine the thorax’s biodynamical response from a projectile impact. The finite element model of the human thorax consists of the thoracic skeleton, heart, lungs, major arteries, major veins, trachea, and bronchi. The finite element model of the human thorax is validated by comparing the model’s results to experimental data obtained from cadavers wearing a protective body armor system undergoing a projectile impact.

Sign in / Sign up

Export Citation Format

Share Document