scholarly journals Orthopaedic Biomechanics: A Practical Approach to Combining Mechanical Testing and Finite Element Analysis

10.5772/10077 ◽  
2010 ◽  
Author(s):  
Rad Zdero ◽  
Habiba Bougherar
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Testing ◽  
Practical Approach ◽  
Element Analysis

Finite Element Analysis of Fiber Composite Dental Bridges: The Effect of Length / Depth Ratio and Load Application Method

1999 ◽  
Author(s):  
Michael D. Nowak ◽  
Kim Haser ◽  
A. Jon Goldberg
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Testing ◽  
Fiber Composite ◽  
Single Point ◽  
Element Analysis ◽  
Elastic Range ◽  
Single Force ◽  
Range Testing ◽  
Fiber Reinforce

Abstract Work is continuing in the evaluation of orthotropic fiber reinforce composites for use in the construction of dental bridges. Finite Element Analysis (FEA) models were constructed based upon mechanical testing of end clamped specimens center loaded with a metal indenter. Various length / depth specimens were evaluated in the elastic range, with a variety of load magnitudes. Separate FEA models utilized single point loading, distributed loading, and the construction of a model indenter. Deflections at the loading point demonstrated that all models presented similar findings to those seen in mechanical testing. The similarity of results between the single loading point and the indenter FEA models suggest that either is reasonable for elastic range testing. The significantly shorter CPU run times for the single force models suggest that this may be the best means by which to model orthotropic fiber reinforced dental composites in the elastic range.

scholarly journals New Dental Implant with 3D Shock Absorbers and Tooth-Like Mobility—Prototype Development, Finite Element Analysis (FEA), and Mechanical Testing

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3444
Author(s):  
Avram Manea ◽  
Grigore Baciut ◽  
Mihaela Baciut ◽  
Dumitru Pop ◽  
Dan Sorin Comsa ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Testing ◽  
Alveolar Bone ◽  
Mechanical Performance ◽  
Implant Design ◽  
Element Analysis ◽  
Prototype Development ◽  
Second Stage ◽  
Testing Protocol

Background: Once inserted and osseointegrated, dental implants become ankylosed, which makes them immobile with respect to the alveolar bone. The present paper describes the development of a new and original implant design which replicates the 3D physiological mobility of natural teeth. The first phase of the test followed the resistance of the implant to mechanical stress as well as the behavior of the surrounding bone. Modifications to the design were made after the first set of results. In the second stage, mechanical tests in conjunction with finite element analysis were performed to test the improved implant design. Methods: In order to test the new concept, 6 titanium alloy (Ti6Al4V) implants were produced (milling). The implants were fitted into the dynamic testing device. The initial mobility was measured for each implant as well as their mobility after several test cycles. In the second stage, 10 implants with the modified design were produced. The testing protocol included mechanical testing and finite element analysis. Results: The initial testing protocol was applied almost entirely successfully. Premature fracturing of some implants and fitting blocks occurred and the testing protocol was readjusted. The issues in the initial test helped design the final testing protocol and the new implants with improved mechanical performance. Conclusion: The new prototype proved the efficiency of the concept. The initial tests pointed out the need for design improvement and the following tests validated the concept.

Biomechanics of a posture-controlling cervical artificial disc: mechanical, in vitro, and finite-element analysis

2010 ◽  
Vol 28 (6) ◽  
pp. E11 ◽  
Author(s):  
Neil R. Crawford ◽  
Jeffery D. Arnett ◽  
Joshua A. Butters ◽  
Lisa A. Ferrara ◽  
Nikhil Kulkarni ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cervical Spine ◽  
Postural Control ◽  
Range Of Motion ◽  
Computer Modeling ◽  
Mechanical Testing ◽  
Artificial Disc ◽  
Element Analysis

Different methods have been described by numerous investigators for experimentally assessing the kinematics of cervical artificial discs. However, in addition to understanding how artificial discs affect range of motion, it is also clinically relevant to understand how artificial discs affect segmental posture. The purpose of this paper is to describe novel considerations and methods for experimentally assessing cervical spine postural control in the laboratory. These methods, which include mechanical testing, cadaveric testing, and computer modeling studies, are applied in comparing postural biomechanics of a novel postural control arthroplasty (PCA) device versus standard ball-and-socket (BS) and ball-in-trough (BT) arthroplasty devices. The overall body of evidence from this group of tests supports the conclusion that the PCA device does control posture to a particular lordotic position, whereas BS and BT devices move freely through their ranges of motion.

Geometry design of vertical probe needle using mechanical testing and finite element analysis

2014 ◽  
Vol 15 (11) ◽  
pp. 2335-2342 ◽  
Author(s):  
Hyock-Ju Kwon ◽  
Jiwon Lee ◽  
Bonghun Shin ◽  
Soo Jeon ◽  
Chung Su Han ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Testing ◽  
Element Analysis ◽  
Geometry Design ◽  
Vertical Probe

Finite Element Analysis as an Iterative Design Tool for Students in an Introductory Biomechanics Course

2021 ◽  
Author(s):  
Steven Higbee ◽  
Sharon Miller
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Testing ◽  
Fracture Fixation ◽  
Design Knowledge ◽  
Element Analysis ◽  
Iterative Design ◽  
Design Changes ◽  
Fixation Plate ◽  
Capstone Design

Abstract Insufficient engineering analysis is a common weakness of student capstone design projects. Efforts made earlier in a curriculum to introduce analysis techniques should improve student confidence in applying these important skills toward design. To address student shortcomings in design, we implemented a new design project assignment for second-year undergraduate biomedical engineering students. The project involves the iterative design of a fracture fixation plate and is part of a broader effort to integrate relevant hands-on projects throughout our curriculum. Students are tasked with (1) using computer-aided design (CAD) software to make design changes to a fixation plate, (2) creating and executing finite element models to assess performance after each change, (3) iterating through three design changes, and (4) performing mechanical testing of the final device to verify model results. Quantitative and qualitative methods were used to assess student knowledge, confidence, and achievement in design. Students exhibited design knowledge gains and cognizance of prior coursework knowledge integration into their designs. Further, students self-reported confidence gains in approaching design, working with hardware and software, and communicating results. Finally, student self-assessments exceeded instructor assessment of student design reports, indicating that students have significant room for growth as they progress through the curriculum. Beyond the gains observed in design knowledge, confidence, and achievement, the fracture fixation project described here builds student experience with CAD, finite element analysis, 3D printing, mechanical testing, and design communication. These skills contribute to the growing toolbox that students ultimately bring to capstone design.

Mechanical testing and finite element analysis of orthodontic teardrop loop

2008 ◽  
Vol 133 (2) ◽  
pp. 188.e9-188.e13 ◽  
Author(s):  
Maria Elisa Rodrigues Coimbra ◽  
Norman Duque Penedo ◽  
Jayme Pereira de Gouvêa ◽  
Carlos Nelson Elias ◽  
Mônica Tirre de Souza Araújo ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Testing ◽  
Element Analysis
Sign in / Sign up

Export Citation Format

Share Document