Colorimetric Estimation of Nebivolol Hydrochloride in Bulk and Pharmaceutical Dosage Form

2019 ◽  
Vol 9 (4) ◽  
pp. 253
Author(s):  
Syed Sagheer Ahamed ◽  
Mohamed Khaleel ◽  
Nirmal. T. Havannavar ◽  
Syed Shariff Miyan
Author(s):  
Chandani Makvana ◽  
Satyajit Sahoo

A simple, rapid, precise, accurate and sensitive spectrophotometric method has been developed for the simultaneous estimation and validation of Nebivolol Hydrochloride (NEB) and Valsartan (VAL) in pure and combined tablet dosage forms. Pure drug samples of NEB and VAL were dissolved in 67 mM Phosphate buffer pH 6.8 with 0.5% sodium dodecyl sulphate (SDS) and found to have absorbance maxima at 280 nm for NEB and 250 nm for VAL, respectively. The linearity lies between 10-70μg/ml for NEB and 10-60μg/ml for VAL in this method. The correlation coefficient (r2) was found to be 0.9965 for NEB and 0.9960 for VAL. The % recoveries obtained were 95.65%-109.85% for NEB and 97.42%-101.43% for VAL. The % RSD found 0.271%-1.490% for intraday and 0.334%-1.917% for interday for NEB and 0.188%-0.944% for intraday and 0.392%-1.197% for interday for VAL. The limit of detection and limit of quantitation for NEB were found to be 4.608μg/ml and 13.965μg/ml respectively and the limit of detection and limit of quantitation for VAL were found to be 4.348μg/ml and 13.178μg/ml respectively. Simultaneous calibration of both drugs in 67 mM Phosphate buffer pH 6.8 with 0.5% SDS shows that λmax of one drug does not interfere on the λmax of other drug. Recovery study was performed to confirm the accuracy of the method. The results of analysis have been validated statistically by recovery studies as per International Conference on Harmonization guidelines. The method showed good reproducibility and recovery with % RSD Lessthan 2. Hence, this proposed method was found to be rapid, specific, precise and accurate and can be successfully applied for the routine analysis of NEB and VAL in pure and combined tablet dosage form.


2018 ◽  
Vol 4 (4) ◽  
pp. 523-531
Author(s):  
Hina Mumtaz ◽  
Muhammad Asim Farooq ◽  
Zainab Batool ◽  
Anam Ahsan ◽  
Ashikujaman Syed

The main purpose of development pharmaceutical dosage form is to find out the in vivo and in vitro behavior of dosage form. This challenge is overcome by implementation of in-vivo and in-vitro correlation. Application of this technique is economical and time saving in dosage form development. It shortens the period of development dosage form as well as improves product quality. IVIVC reduce the experimental study on human because IVIVC involves the in vivo relevant media utilization in vitro specifications. The key goal of IVIVC is to serve as alternate for in vivo bioavailability studies and serve as justification for bio waivers. IVIVC follows the specifications and relevant quality control parameters that lead to improvement in pharmaceutical dosage form development in short period of time. Recently in-vivo in-vitro correlation (IVIVC) has found application to predict the pharmacokinetic behaviour of pharmaceutical preparations. It has emerged as a reliable tool to find the mode of absorption of several dosage forms. It is used to correlate the in-vitro dissolution with in vivo pharmacokinetic profile. IVIVC made use to predict the bioavailability of the drug of particular dosage form. IVIVC is satisfactory for the therapeutic release profile specifications of the formulation. IVIVC model has capability to predict plasma drug concentration from in vitro dissolution media.


Author(s):  
Gopi Patel ◽  
Kiral M Prajapati ◽  
Bhavesh Prajapati ◽  
Samir K Shah

A simple, accurate and precise stability-indicating RP-HPLC method was developed and subsequently validated for simultaneous determination of ilaprazole and domperidone in bulk and pharmaceutical dosage form. The proposed HPLC method utilizes  C18  (250 mm × 4.6 mm × 5 µm) column with mobile phase comprising of 0.5 % glacial acetic acid in water pH 5.5 adjusted with ammonia solution: methanol in the ratio 45:55 v/v at a flow rate of 1.0 ml/min. Quantitation was achieved with UV detection at 286 nm based on peak area with linear calibration curves at concentration  ranges 80-120µg/ml for ilaprazole and 240-360 µg/ml for domperidone  with correlation coefficient of 0.999.The retention times of ilaprazole and domperidone  were found to be 3.0 min, 5.4 min respectively. The mean recoveries obtained for ilaprazole and domperidone were found to be 99.76 ± 0.6463 % and 100.7 ± 0.2424 % respectively. Stress testing which covered acid, alkali hydrolysis, and peroxide, photolytic, thermal degradation was performed to prove the specificity of the proposed method and degradation was achieved. The proposed method was successfully applied for the stability indicating simultaneous estimation of ilaprazole and domperidone in routine quality control analysis in bulk and pharmaceutical formulation.


2016 ◽  
Vol 12 (3) ◽  
pp. 177-184 ◽  
Author(s):  
Gamal Abdel-Hafiz Mostafa ◽  
Mohammed Hefnawy ◽  
Mohammed Abounassif ◽  
Amer Alanazi ◽  
Abdulrahman Al-Majed ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document