scholarly journals Yield Gap Analysis in Major Field Crops of Tamil Nadu

Author(s):  
A. Divakaran ◽  
V. Keerthana ◽  
M. Udhayakumar

Agriculture plays a vital role in Indian economy, contributes 13% of gross domestic product and provides employment opportunities to more than 50% of work force.  In India 60% of land area are arable leads to second largest country in terms of total arable land area. The technology development rate is 2 percent and farm productivity rate only increase by 0.3 percent in major crops. It implied that outreach of technology from lab to land have several constraints. In this study, yields gaps of major field crops are calculated with the data provided by the joint directorate of Tamil Nadu, to find, to which extent the advancement in agriculture is helpful and it is found out that the yield gap II of selected varieties of major crops are high. It shows the deviation from the potential yield of the variety with the actual yield obtained by the farmer.

2021 ◽  
Vol 13 (22) ◽  
pp. 4602
Author(s):  
Keltoum Khechba ◽  
Ahmed Laamrani ◽  
Driss Dhiba ◽  
Khalil Misbah ◽  
Abdelghani Chehbouni

Africa has the largest population growth rate in the world and an agricultural system characterized by the predominance of smallholder farmers. Improving food security in Africa will require a good understanding of farming systems yields as well as reducing yield gaps (i.e., the difference between potential yield and actual farmer yield). To this end, crop yield gap practices in African countries need to be understood to fill this gap while decreasing the environmental impacts of agricultural systems. For instance, the variability of yields has been demonstrated to be strongly controlled by soil fertilizer use, irrigation management, soil attribute, and the climate. Consequently, the quantitative assessment and mapping information of soil attributes such as nitrogen (N), phosphorus (P), potassium (K), soil organic carbon (SOC), moisture content (MC), and soil texture (i.e., clay, sand and silt contents) on the ground are essential to potentially reducing the yield gap. However, to assess, measure, and monitor these soil yield-related parameters in the field, there is a need for rapid, accurate, and inexpensive methods. Recent advances in remote sensing technologies and high computational performances offer a unique opportunity to implement cost-effective spatiotemporal methods for estimating crop yield with important levels of scalability. However, researchers and scientists in Africa are not taking advantage of the opportunity of increasingly available geospatial remote sensing technologies and data for yield studies. The objectives of this report are to (i) conduct a review of scientific literature on the current status of African yield gap analysis research and their variation in regard to soil properties management by using remote sensing techniques; (ii) review and describe optimal yield practices in Africa; and (iii) identify gaps and limitations to higher yields in African smallholder farms and propose possible improvements. Our literature reviewed 80 publications and covered a period of 22 years (1998-2020) over many selected African countries with a potential yield improvement. Our results found that (i) the number of agriculture yield-focused remote sensing studies has gradually increased, with the largest proportion of studies published during the last 15 years; (ii) most studies were conducted exclusively using multispectral Landsat and Sentinel sensors; and (iii) over the past decade, hyperspectral imagery has contributed to a better understanding of yield gap analysis compared to multispectral imagery; (iv) soil nutrients (i.e., NPK) are not the main factor influencing the studied crop productivity in Africa, whereas clay, SOC, and soil pH were the most examined soil properties in prior papers.


2021 ◽  
Vol 23 (2) ◽  
pp. 147-153
Author(s):  
R.S. SINGH ◽  
K.K. SINGH ◽  
A.H. BHENGRA ◽  
S.M. SINGH ◽  
GANESH PRASAD ◽  
...  

DSSAT-CANEGRO model have been used to determine crop potential yield over eight districts (viz; Muzaffarnagar, Shahjahanpur, Agra, Lucknow, Basti, Faizabad, Allahabad and Jhansi) representing different agroclimatic conditions & environmentof Uttar Pradesh state in India. The thirty six years (1980-2016) daily weather data of above districts were used to simulate seasonal yield potentials under the various management conditions and compared with the respective district reported yield. The simulated mean potential yield by the CANEGRO model over different district of the state varied between 77.8 t ha-1 in Muzaffarnagar and 97.8 t ha-1 in Agra, while mean reported yield (fresh stalk mass) varied between 40.1 t ha-1 in Jhansi and 62.8 t ha-1 in Muzaffarnagar within the state. Similarly, the attainable yield by the model was simulated lowest of 65.1 t ha-1 in Shahjahanpur and the highest of 73.6 t ha-1 in Faizabad district. The management yield gap was between 9.0 to 30.0 t ha-1 while sowing yield gap was between 7.0 to 26.0 t ha-1 in different districts under study. Further it is not only interesting & surprising but also encouraging to growers that the trends in total yield gap at all the above districts in various agro-climatic zones were found decreasing (narrowed down) at the rate of 138.8 – 801.2 kg ha–1 year–1. Delayed planting by about 30 days in some of the districts resulted into a decrease in sugarcane yield to the tune of 106.7 to 146.7, 103.3 to 143.3 and 80.0 to 133.0 kg ha–1 day–1, respectively. Findings reveal that DSSAT crop simulation model can be an effective tool to aid in decision support system. Yield gap estimates using the past crop data and subsequent adjustment in planting window may help to achieve close to the potential yields.


2019 ◽  
Vol 14 (2) ◽  
pp. 123-131 ◽  
Author(s):  
Ahmad Gorjizad ◽  
Salman Dastan ◽  
Afshin Soltani ◽  
Hosein Ajam Norouzi

To reduce the yield gap, specifying yield constraints in a particular area is necessary. A complete yield gap assessment method must provide information regarding potential yield, actual yield, and causes of the gap and their importance. Therefore, documenting the production process to explain crop management factors in each area is very important. The objective of the study was to perform a rice yield gap analysis by using comparative performance analysis (CPA) and boundary-line analysis (BLA). Data were gathered from about 100 paddy fields in Neka, eastern Mazandaran province, one of the major rice producing regions in Iran, in 2015 and 2016. All agricultural practices from nursery preparation to harvest have been recorded for improved rice cultivars. CPA focuses on the ability to estimate potential yield and the reason for a yield gap. Boundary lines were fitted to the edge of the data cloud of crop yield versus management variables in data from paddy fields monitoring. The documenting analysis shows that the range of paddy yield in 100 fields varied from 6100 to 8200 kg ha–1. Potential yields were 9241 kg ha–1 for CPA method, and 7999 kg ha–1 for BLA method. Furthermore, yield gap predicted 2047 kg ha–1 for CPA method and 874 kg ha–1 for BLA method. In BLA, the average relative yield and relative yield gap of the 13 investigated variables were 89.75% and 10.25% respectively. These results show the importance of each management factor in yield gap. It was concluded that CPA and BLA as applied in the study is a cheap and simple method that, without the need for expensive experimentation, is able to detect yield gap and its causes in a district. From these results, it can be said that the calculated yield gap is close to the definition given for the utilised yield gap and shows the difference between the actual yield and attainable yield in relation to the environmental conditions of the region.


2019 ◽  
Vol 11 (2) ◽  
pp. 581-586 ◽  
Author(s):  
C. Karpagam ◽  
T. Selvaraj ◽  
P. Mooventhan ◽  
V. Venkatasubramanian

Bridging the yield gap in any crop cultivation should be the prime objective of any research efforts. By following the recommended production-cum-protection technologies, farmers can bridge the yield gap in any crop. As per sugarcane is concerned, the average cane yield in Tamil Nadu is 101 t/ha, which is lower than the potential yield of 203.7 t/ha resulting in yield gap of 50.42%. With this in mind, a study has been initiated to explore the social and technology dimensions and constraints involved in cane cultivation to addressing the issue of yield gap. Six blocks from Theni district under Rajshree Sugars & Chemicals Ltd were selected as study area. Information collected from sixty sugarcane farmers with semi structured interview schedule. The study revealed that majority (91.7%) of the respondents had more than 5 years of experience in sugarcane cultivation. Further, it revealed that the technologies, seed rate (83.3%), planting season (75.00%), primary tillage with mould board / disc plough (67%), gap filling, two split application of N and K (58.3%) and Organic fertilizer application  (58.3%), stubble shaving, off baring (50.0%) had adoption rate of more than 50 percentage. Major constraints faced by cent per cent of the respondents were; non availability of labour and high labour cost, prolonged drought and water scarcity, low procuring cost per by sugar factory, yield reduction due to continuous cultivation of sugarcane. The novelty and importance of the study is that it mainly analysis all the sugarcane production and protection technologies from seed rate to harvest in three point continuum viz., fully adopted, partially adopted and not adopted.


2021 ◽  
pp. 0734242X2110214
Author(s):  
Rahul Rajak ◽  
Ravi Kumar Mahto ◽  
Jitender Prasad ◽  
Aparajita Chattopadhyay

Considering the widespread transmission of Coronavirus disease (COVID-19) globally, India is also facing the same crisis. As India already has inadequate waste treatment facilities, and the sudden outbreak of the COVID-19 virus has led to significant growth of Bio-medical waste (BMW), consequently safe disposal of a large quantity of waste has become a more serious concern. This study provides a comprehensive assessment of BMW of India before and during the COVID-19 pandemic. Additionally, this article highlights the gaps in the implementation of BMW rules in India. This study uses various government and non-government organizations, reports and data specifically from the Central Pollution Control Board (CPCB). The finding of the study demonstrated that most of the States/Union Territories (UTs) of India are lacking in terms of COVID-19 waste management. India has generated over 32,996 mt of COVID-19 waste between June and December 2020. During this period, Maharashtra (789.99 mt/month) is highest average generator of COVID-19 waste, followed by Kerala (459.86 mt/month), Gujarat (434.87 mt/month), Tamil Nadu (427.23 mt/month), Uttar Pradesh (371.39 mt/month), Delhi (358.83 mt/month) and West Bengal (303.15 mt/month), and others respectively. We draw attention to the fact that many gaps were identified with compliance of BMW management rules. For example, out of all 35 States/UTs, health care facilitates (HCFs), only eight states received authorization as per BMW management rules. Moreover, the government strictly restricted the practice of deep burials; however, 23 States/UTs are still using the deep burial methods for BMW disposal. The present research suggests that those States/UTs generated on an average of 100 mt/month COVID-19 waste in the last 7 months (June–December 2020) should be considered as a high priority state. These states need special attention to implement BMW rules and should upgrade their BMW treatment capacity.


2021 ◽  
Author(s):  
Peter Mazurkin

It is proposed to identify the hierarchy of federal districts in terms of ecological opportunities for consolidation of vegetation cover according to three classes of soil cover according to the UN classification (grass + shrub + trees) on the land territory of Russia by ranking the shares of vegetation cover and human-modified lands, as well as ecological coefficients. The total ecological coefficient is calculated by dividing the share of vegetation by the total share of anthropogenic land. The forest-agricultural coefficient is convenient as the ratio of the forest area to the arable land area. The identification method revealed stable regularities of rank distributions in the form of trends and wave equations.


2013 ◽  
Vol 27 (1) ◽  
pp. 131-141
Author(s):  
Narendra Kumar Bhatia ◽  
Mohammad Yousuf ◽  
Raman Nautiyal

Sign in / Sign up

Export Citation Format

Share Document