The Design of an IEEE 1588 End-to-End Transparent Ethernet Switch

<p>In measurement and control systems there is often a need to synchronise distributed clocks. Traditionally, synchronisation has been achieved using a dedicated medium to convey time information, typically using the IRIG-B serial protocol. The precision time protocol (IEEE 1588) has been designed as an improvement to current methods of synchronisation within a distributed network of devices. IEEE 1588 is a message based protocol that can be implemented across packet based networks including, but not limited to, Ethernet. Standard Ethernet switches introduce a variable delay to packets that inhibits path delay measurements. Transparent switches have been introduced to measure and adjust for packet delay, thus removing the negative effects that these variations cause. This thesis describes the hardware and firmware design of an IEEE 1588 transparent end-to-end Ethernet switch for Tekron International Ltd based in Lower Hutt, New Zealand. This switch has the ability to monitor all Ethernet traffic, identify IEEE 1588 timing packets, measure the delay that these packets experience while passing through the switch, and account for this delay by adjusting a time-interval field of the packet as it is leaving the switch. This process takes place at the operational speed of the port, and without introducing significant delay. Time-interval measurements can be made using a high-precision timestamp unit with a resolution of 1 ns. The total jitter introduced by this measurement process is just 4.5 ns through a single switch.</p>

The Design of an IEEE 1588 End-to-End Transparent Ethernet Switch

<p>In measurement and control systems there is often a need to synchronise distributed clocks. Traditionally, synchronisation has been achieved using a dedicated medium to convey time information, typically using the IRIG-B serial protocol. The precision time protocol (IEEE 1588) has been designed as an improvement to current methods of synchronisation within a distributed network of devices. IEEE 1588 is a message based protocol that can be implemented across packet based networks including, but not limited to, Ethernet. Standard Ethernet switches introduce a variable delay to packets that inhibits path delay measurements. Transparent switches have been introduced to measure and adjust for packet delay, thus removing the negative effects that these variations cause. This thesis describes the hardware and firmware design of an IEEE 1588 transparent end-to-end Ethernet switch for Tekron International Ltd based in Lower Hutt, New Zealand. This switch has the ability to monitor all Ethernet traffic, identify IEEE 1588 timing packets, measure the delay that these packets experience while passing through the switch, and account for this delay by adjusting a time-interval field of the packet as it is leaving the switch. This process takes place at the operational speed of the port, and without introducing significant delay. Time-interval measurements can be made using a high-precision timestamp unit with a resolution of 1 ns. The total jitter introduced by this measurement process is just 4.5 ns through a single switch.</p>

A simulation based performance evaluation of optical ethernet switch

<p class="FigureCaption"><span>With the advent of several new cloud radio access network (C-RAN) technologies, today’s networking environment is dramatically altered and is experiencing a rapid transformation. One of the most important is ethernet based C-RAN, in support of which many products such as optical Ethernet switches have recently appeared on the market. This paper presents the performance analysis of such switches with respect to packet loss ratio (PLR), latency and packet delay variation (PDV). We employed the Simula based on discrete event modelling on Simula (DEMOS), a context class for discrete event simulation to simulate a cut-through optical ethernet switch under two types of traffics: high priority (HP) traffic and low priority (LP) traffic. In this way, the paper evaluates the optical Ethernet switch performance quantitatively. The results obtained from the simulator showed that the high quality of service was reflected on HP traffic and the low quality of service in LP traffic. Hence, HP traffic can be used for transporting radio over ethernet (RoE) traffic while LP traffic can used for transporting time insensitive application. It is also found that HP traffic experiences a PDV equals to the duration of maximum sized LP traffic in Optical Ethernet switch.</span></p>