Analysis of oxide scale thickness and pores position of HCM12A steel in supercritical water

More attention has been paid to the exfoliation of oxide scale on high-temperature heating surface of utility boiler. The oxidation mechanism of HCM12A steel in supercritical water is proposed and the growth of oxide film is simulated. The duplex scale contains an outer magnetite layer and an inner Cr-rich spinel layer. According to the data of Backhaus and Töpfer, the diffusion coefficient values of iron in magnetite layer are discussed and the function of R V, R I {R}_{\text{I}} for oxygen activity can be used for calculation of iron diffusion coefficients in Cr-rich spinel layer. Based on Wagner’s oxidation theory, the oxidation rate constants of HCM12A are calculated at 500 and 600°C in supercritical water, compared with experimental data of the relevant literatures. The oxygen activities at the interfaces of alloy/Cr-rich spinel oxide and magnetite/supercritical water are estimated. The simulation results of weight gain are matched with the test data. The iron diffusion mechanisms inside the magnetite layer and the Cr-rich spinel layer are analyzed. The iron diffusion coefficient at the interface of Cr-rich spinel/magnetite is discontinuous, while the oxygen activity is continuous in the whole double layer. The thickness of oxide scale on inner tube walls of the final superheater coils (T91) of a 600 MW supercritical boiler is calculated by using the calculation method provided by the paper. The modeling results, the measured data, and the calculation results by the method are compared. Accurate calculation of the thickness of the inner and outer oxide scales can provide a necessary basis for predicting the stress and exfoliation of oxide scales.

Oxidation and electrical properties of chromium–iron alloys in a corrosive molten electrolyte environment

Chromium–iron (CrFe) binary alloys have recently been proposed to serve as the “inert” anode for molten oxide electrolysis (MOE). Herein, the effects of anodic polarization on physical and functional properties of CrFe anodes in the corrosive environment of MOE are studied via empirical observations and theoretical calculations. The findings indicate that the alloys form an inner chromia–alumina solid-solution covered by an MgCr2O4 spinel layer. A survey into the electrical properties of the detected oxides suggests that the layered oxide scale function as an efficient conductor of electricity at elevated temperature. The formation mechanism of the oxides is also investigated.

Mitigation of Chromium Poisoning of Ferritic Interconnect from Annealed Spinel of CuFe2O4

Low-temperature solid oxide fuel cells permit the possibility of metallic interconnects over conventional ceramic interconnects. Among various metallic interconnects, the ferritic interconnects are the most promising. However, chromium poisoning in them adversely affects their performance. To resolve this issue, various coatings and pretreatment methods have been studied. Herein, this article encloses the coating of CuFe2O4 spinel over two prominent ferritic interconnects (Crofer 22 APU and SUS 430). The CuFe2O4 spinel layer coating has been developed by the dip-coating of both samples in CuFe2O4 slurry, followed by heat treatment at 800 °C in a reducing environment (5% hydrogen and 95% nitrogen). Additionally, both samples were annealed to further enhance their spinel coating structure. The morphological and crystallinity analysis confirmed that the spinel coating formed multiple layers of protection while annealing further reduced the thickness and improved the densities. Moreover, the area-specific resistance (ASR) and weight gain rate (WGR) of both samples before and after annealing was calculated using mathematical modeling, which matches with the experimental data. It has been noted that CuFe2O4 spinel coating improved the ASR and WGR of both samples which were further improved after annealing. This research reveals that the CuFe2O4 spinel is the promising protective layer for ferritic interconnects and annealing is the better processing technique for achieving the preferred properties.

Oxidation and electrical properties of chromium-iron binary alloys in a corrosive molten electrolyte environment

Chromium-iron (CrFe) binary alloys have recently been proposed to serve as the ʺinertʺ anode for molten oxide electrolysis (MOE). Herein, the effects of anodic polarization on physical and functional properties of CrFe anodes in the corrosive environment of MOE are studied via empirical observations and theoretical calculations. The findings indicate that the alloys form an inner chromia-alumina solid-solution covered by an MgCr2O4 spinel layer. A survey into the electrical properties of the detected oxides suggests that the layered oxide scale function as an efficient conductor of electricity at elevated temperature. The formation mechanism of the oxides is also investigated.

Reinforcing the surface conductivity and stability of primary particles for high-performance Li-rich layered Li1.18Mn0.52Co0.15Ni0.15O2via an integrated strategy

A novel integrated Li3PO4 and spinel layer on primary particles surface was constructed by a facile synchronous route. It acts as a protective layer and a 3D Li+ diffusion network, leading to a superior structural stability and rate capability.

Improving anti-oxidation performance of 430 SS by fabricating co-contained spinel coating as solid oxide fuel cells interconnect

PurposeThe purpose of this study is to improve the performance of AISI 430 stainless steel (430 SS) in increasing its oxidation resistance, suppressing coating spalling and cracking, sustaining appropriate conductivity and blocking Cr evaporation as an interconnect material for intermediate temperature solid oxide fuel cells; a protective co-contained coating is formed onto stainless steel via the surface alloying process and followed by thermal oxidation.Design/methodology/approachIn this work, oxidation behavior of coated specimen is studied during isothermal and cyclic oxidation measurements. Moreover, the conductivity is also investigated by area specific resistance (ASR) measurement.FindingsCo-contained spinel layer shows an outstanding performance in preventing oxidation and improving conductivity compared with uncoated specimens. The protective spinel coating also reduces the ASR for coated specimen (0.0576O cm2) as compared to the uncoated specimen (1.87296O cm2) after isothermal oxidation.Originality/valueThe probable mechanism of co-contained alloy converting into spinel and the spinel transfer electron is presented.