Frequency-tunable wide-angle polarization selection with a graphene-based anisotropic epsilon-near-zero metamaterial

In this paper, we achieve frequency-tunable wide-angle polarization selection based on an anisotropic epsilon-near-zero (AENZ) metamaterial mimicked by a subwavelength graphene/SiO2 multilayer. The physical mechanism of wide-angle polarization selection can be explained by the analysis of the iso-frequency curve (IFC). Under transverse electric polarization, only the incident lights which are close to normal incidence can transmit through the designed multilayer since the IFC of the AENZ metamaterial is an extremely small circle. However, under transverse magnetic polarization, all the incident lights can transmit through the designed multilayer since the IFC of the AENZ metamaterial is a flat ellipse. Therefore, polarization selection can work in a broad angular width. By changing the gate voltage applying to the graphene, the operating frequency of polarization selection can be flexibly tuned. The optimal operating angular width of high-performance polarization selection where the polarization selection ratio is larger than 102 reaches 54.9 degrees. This frequency-tunable wide-angle polarization selector would possess potential applications in liquid crystal display, read-write magneto-optical data storage, Q-switched lasing, and chiral molecule detection.

Bi-directional photonic switch and optical data storage in a hybrid optomechanical system

We propose to achieve quantum optical nonreciprocity in a hybrid qubit-optomechanical solid-state system. A two-level system (qubit) is coupled to a mechanically compliant mirror (via the linear Jaynes–Cummings interaction) placed in the middle of a solid-state optical cavity. We show for the first time that the generated optical bistability exhibits a bi-directional photonic switch, making the device a suitable candidate for a duplex communication system. On further exploring the fluctuation dynamics of the system, we found that the proposed device breaks the symmetry between forward and backward propagating optical modes (optical nonreciprocity), which can be controlled by tuning the various system parameters, including the qubit, which emerges as a new handle. The device thus behaves like an optical isolator and hence can store optical data in the acoustic mode, which can be retrieved later.

A Review on Physical and Optical Properties of Zinc Tellurite Glasses Co-doped with different rare earth ions

In this work we review the effect of physical and optical properties with different ion zinc contents of tellurite base glass. The physical properties of the glasses were evaluated and the change in density, molar volume and ionic packing density in these glasses indicates the effect of ZnO different content show on the glasses structure. The study of optical properties such as the optical band gap and refractive index of zinc tellurite glass were studied. Zinc Tellurite glasses doped with Er3+ ions were synthesized by varies researcher. The glasses were characterized by X- ray diffraction, optical absorption and photoluminescence spectra. The glassy nature of zinc Tellurite host glass has been confirmed through XRD measurements. The glasses doped or co-doped with rare-earth ions have generated much interest due to the possibility of several promising applications such as optical data storage, visible laser, fibre amplifier, optical communication and sensor devices

Integrated non-volatile plasmonic switches based on phase-change-materials and their application to plasmonic logic circuits

Integrated photonic devices or circuits that can execute both optical computation and optical data storage are considered as the building blocks for photonic computations beyond the von Neumann architecture. Here, we present non-volatile hybrid electro-optic plasmonic switches as well as novel architectures of non-volatile combinational and sequential logic circuits. The electro-optic switches consist of a plasmonic waveguide having a thin layer of a phase-change-material (PCM). The optical losses in the waveguide are controlled by changing the phase of the PCM from amorphous to crystalline and vice versa. The phase transition process in the PCM can be realized by electrical threshold switching or thermal conduction heating via external electrical heaters or the plasmonic waveguide metal itself as an integrated heater. We have demonstrated that all logic gates, a half adder circuit, as well as sequential circuits can be implemented using the plasmonic switches as the active elements. Moreover, the designs of the plasmonic switches and the logic operations show minimum extinction ratios greater than 20 dB, compact designs, low operating power, and high-speed operations. We combine photonics, plasmonics and electronics on the same platform to design an effective architecture for logic operations.