Influence of cerium content on the microstructure and thermal expansion properties of suction cast Al-Cu-Fe alloys

Low-expansion alloys are of great importance and can be used for the development of new aerospace materials. Herein, we report diverse rare earth quasicrystal alloys fabricated by the vacuum suction casting process. The effects of the addition of cerium (Ce) on the microstructure, thermal expansion properties and microhardness of the Al-Cu-Fe alloy were systematically investigated. This study discovered the tiny Al-Cu-Fe-Ce microstructure. A uniform distribution could be achieved after Ce addition amount is elevated. At the Ce addition amount of 1 at%, the lowest alloy thermal expansion coefficient was obtained. The alloy exhibited the maximum microhardness under these conditions. The microhardness of alloys containing 1 at% of Ce was approximately 2.4 times higher than the microhardness exhibited by alloys devoid of Ce additives. The coefficient of thermal expansion decreases by approximately 20%. The use of the suction casting process and the addition of an appropriate amount of Ce can potentially help design and develop Al-Cu-Fe-Ce alloys.

Influence of Dissolving Fe–Nb–B–Dy Alloys in Zirconium on Phase Structure, Microstructure and Magnetic Properties

This paper refers to the structural and magnetic properties of [(Fe80Nb6B14)0.88Dy0.12]1−xZrx (x = 0; 0.01; 0.02; 0.05; 0.1; 0.2; 0.3; 0.5) alloys obtained by the vacuum mold suction casting method. The analysis of the phase contribution indicated a change in the compositions of the alloys. For x < 0.05, occurrence of the dominant Dy2Fe14B phase was observed, while a further increase in the Zr content led to the increasing contribution of the Fe–Zr compounds and, simultaneously, separation of crystalline Dy. The dilution of (Fe80Nb6B14)0.88Dy0.12 in Zr strongly influenced the magnetization processes of the examined alloys. Generally, with the increasing x parameter, we observed a decrease in coercivity; however, the unexpected increase in magnetic saturation and remanence for x = 0.2 and x = 0.3 was shown and discussed.