SYNTHESIS OF CHROME TANNING AGENT IN PRESENCE OF OLIGO - AND POLYSACCHARIDES

The conditions for the synthesis of chrome tanning agent during the reduction of sodium dichromate with oligo - and polysaccharides have been investigated. The synthesis of the tanning agent is based on the reduction of hexavalent chromium Cr (VI) in the form of sodium dichromate with reducing agents from the class of vegetable oligo- and polysaccharides with a different sequence of their introduction into the reaction mixture in the presence of sulfuric acid. The introduction of sulfuric acid was carried out gradually to avoid overheating and splashing of the reaction mixture, since the reduction reaction is accompanied by a significant thermal effect. Glucose, maltodextrin and pectin were used as reducing agents. The properties of the obtained products were evaluated by spectrophotometry, conductometry, and analytical methods. It has been shown that the use of native pectin leads to the formation of a gel like mass due to the coordination of the functional groups of galacturonic acid, which is part of the pectin, with chromium atoms. Pretreatment of pectin with a citric acid solution and optimization of synthesis conditions made it possible to obtain a chromium tanning agent that does not contain unreduced chromium. The influence of oligosaccharides on the properties of chromium tanning agents, including their ability to dissolve, is considered. It is shown that the reduction of sodium dichromate with maltodextrin during the reaction results in the formation of incomplete oxidation products of the oligosaccharide, which cause the masking effect of the chromium complex and increase in the resistance of the tanning agent to the action of alkaline reagents used to increase in the basicity during tanning. Experimental samples of chrome tanning agent in dry form were obtained and their leatherprocessing characteristics were studied. The results of technological tests have confirmed the theoretical propositions, according to which the high hydrothermal stability of the leather semifinished product, the almost complete depletion of the processing solution and the required physical and mechanical properties of the finished leather are achieved by introducing the products of incomplete oxidation of oligosaccharides into the inner sphere of the chromium complex.

Pilot-Scale Study on Improving SNCR Denitrification Efficiency by Using Gas Additives

The experiment of improving Selective Non-Catalytic Reduction (SNCR) denitrification efficiency with gas additives (CH4 and C3H8) was carried out in the 50 kW circulating fluidized bed (CFB) pilot-scale equipment. The results show that the denitrification efficiency can reach 20 % when the reaction temperature is 650 °C, and the optimum mole ratio of C3H8/NH3 is 0.5. The denitrification efficiency can exceed 50 % when the mole ratio of C3H8/NH3 is 0.4 and the reaction temperature is 720 °C. However, the CH4 additive does not promote denitrification at this temperature. When the reaction temperature is 760 °C, the optimum denitrification efficiency of CH4 is 60 %, and the required CH4/NH3 is 0.8. Once the amount of CH4 exceeds the optimal value, the denitrification efficiency is suppressed. In addition, the concentrations of N2O and CO in the gas increase significantly with an increase of gas additives. Due to the incomplete oxidation of C3H8, a large amount of C2H4 is produced in the low-temperature region (< 750 °C) of SNCR.