Breed-and-burn fuel cycle in molten salt reactors

The operation of a reactor on an open but self-sustainable cycle without actinide separation is known as breed-and-burn. It has mostly been envisioned for use in solid-fueled fast-spectrum reactors such as sodium-cooled fast reactors. In this paper the applicability of breed-and-burn to molten salt reactors is investigated first on a cell level using a modified neutron excess method. Several candidate fuel salts are selected and their performance in a conceptual three-dimensional reactor is investigated. Chloride-fueled single-fluid breed-and-burn molten salt reactors using enriched chlorine are shown to be feasible from a neutronics and fuel cycle point of view at the cost of large fuel inventories.

Development of Stainless Steels in Nuclear Industry: With Emphasis on Sodium Cooled Fast Spectrum Reactors History, Technology and Foresight

Stainless steels (SS) have earned a unique position as a widely accepted class of alloys with track record of steadily improving the performance and increasing applications from 1913 till date. This distinction is attributed to R&D, innovations and applications leading to harnessing the rare combination of properties of stainless steels, since its discovery hundred years back. Though the initial discovery of stainless steel is basically serendipity, and based on previous work, its indispensable position today, in many a wide range of applications is due to intense R&D efforts in understanding its physical, chemical, thermal and thermo-mechanical response for various chemistries and microstructures. A deliberate attempt to extend its application spectrum through various routes of manufacturing in the last century is another crucial aspect of the success story. The first part of the presentation would briefly review this exciting journey of unravelling the mysteries of stainless steels.The second part of the presentation would highlight the evolution of stainless steels in the nuclear industry, especially for the sodium cooled fast reactors. Early 70s have seen the application of stainless steels in first generation water based nuclear power plants and AISI types 304 and 316 SS was recommended for structural and core applications in fast spectrum reactors (FSR). Failure of some of the components even in the manufacturing stage and quest for improving mechanical properties and sensitisation and intergranular corrosion resistances resulted in the development of 304L, 304LN, 316L, 316LN SS during 1980-90 for further applications in FSRs. Towards core applications in intense radiation environments, three generations of stainless steels namely 20% cold worked 316 SS, D9, and D9I have been developed to yield high burnup and to triple the lifetime of the core components of the fast reactors. Towards closing the fuel cycle, again 304L SS was the workhorse material which was upgraded with newer varieties like nitric acid grade alloys for improved corrosion resistance and longer life. Manufacturing of special grades of SS and the developments in fabrication technologies was necessary in order to enhance the performance of components and to avoid failures. Welding, inspection, quality assurance and structural integrity of various components of SS for FSRs and fuel cycle facilities resulted in developments in areas like modelling, devices, methodologies and analysis. An opportunity existed for the development and application of innovative non-destructive testing techniques for robust examination of critical components.Nuclear industry is embarking a state of the art fourth generation reactors. The consequent newer generation of SS are evolving with improved properties to match the expectations of performance in increased temperature, pressure, chemical and other physical constraints. It is of paramount importance to consider the extension of the lifetime of the current reactors from 40-60 to 60-80 years for economic considerations, and in this regard innovations are necessary in the development of newer varieties of stainless steels with respect to modelling and life prediction, manufacturing, fabrication, testing and evaluation. Thus the management approach to knit a network of industry-research-academia is a key approach for way forward. A development of roadmap for robust science based technology development with foresight is a desired management strategy.