COMPARISON OF TWO STAINING METHODS FOR ANODIZING IN ALLOY 6063 ALUMINUM PROFILES

Aluminum stands out for being a light, corrosion-resistant, and recyclable metal, achieving wide coverage in the market. When incorporated into alloying elements, it is possible to acquire other desirable characteristics. Alloy 6063, intended for architectural purposes, has aesthetic, structural, and strength functions. This study aims to compare two different staining methods on the surface of anodized profiles of aluminum alloy 6063. Anodized finishing is performed through an electrolytic process using sulfuric acid as an electrolyte to change the surface layer of the material, ensuring a more resistant aluminum oxide film than that formed naturally. For decorative purposes, the anodic film coloration can be performed by several methodologies, including, in this case, the coloration by organic adsorption, with the use of aniline, and the electrolytic coloration, composed of tin sulfate salts, both for obtaining the black color. To compare, neutral saline mist tests, scanning electron microscopy analysis, determination of the anodic layer thickness, and immersion tests with 3.5 percent sodium chloride for 1000 hours. The results obtained highlight that both were shown to be resistant to corrosion due to the fact that they do not present corrosion points when exposed to the neutral saline mist test for 600 hours. In the immersion tests, both remained resistant to sodium chloride. Because both methodologies present satisfactory results in all tests, the quality of the applied stains is ensured, and it is found that they are equivalent when the parameters discussed are used.

The electric dipole response of even-even 154-164Dy isotopes

The excitation of pygmy dipole resonance (PDR) and giant dipole resonance (GDR) in even-even 154-164Dy isotopes is examined through quasiparticle random-phase approximation (QRPA) with the effective interactions that restores the broken translational and Galilean invariances. In each isotope, an electric response emerges by showing ample distribution at energies below and above 10 MeV. We, therefore, study the transition cross sections and probabilities, photon strength functions, transition strengths, isospin character, and collectivity of the predicted E1 responses.

COMPARISON OF TWO STAINING METHODS FOR ANODIZING IN ALLOY 6063 ALUMINUM PROFILES

Background: Aluminum stands out for being a light, corrosion-resistant, and recyclable metal, achieving wide coverage in the market. When incorporated into alloying elements, it is possible to acquire other desirable characteristics. Alloy 6063, intended for architectural purposes, has aesthetic, structural, and strength functions. Anodized finishing is performed through an electrolytic process, ensuring a more resistant aluminum oxide film than that formed naturally. For decorative purposes, the anodic film coloration can be performed by several methodologies, in this case, for the coloration by organic adsorption, with the use of aniline, and the electrolytic coloration, composed of tin sulfate salts, both for obtaining the black color. Aim: Compare of two different staining methods on the surface of anodized profiles of aluminum alloy 6063. Methods: Profile samples were collected and tests were carried out to measure the thickness of the anodic layer, immersion tests with 3,5 percent sodium chloride, for 1000 hours, and neutral saline mist, for 600 hours. Results and Discussion: Both methodologies proved to be resistant to immersion tests with sodium chloride, as well as with neutral saline mist, and these tests are quite aggressive and provide corrosion of the material when not well treated. Corrosion points were only seen at the intersections performed, and in the rest of thearea, no points were detected. Conclusions: The result of both methodologies was positive, considering tht there was no corrosion in the tested samples, except in the intersections performed, as well as the maintenance of the color in both tested methodologies, which was not expected in the literature. For future work, it is suggested to deepen the study to perform electrochemical impedance spectroscopy tests for exaluate the strength of the anodic film and perform anodizing with the same parameters, however, with different anilines to analyze their behavior.

Effects of some level density models and γ-ray strength functions on production cross-section calculations of 16,18O and 24,26Mg radioisotopes

Oxygen and magnesium isotopes can be used in nuclear reactor materials as cooling, shielding, coating, electronics etc. They can also occur through nuclear reactions during the reactor operation. The exposure of high energy gamma can change the material and its properties, and hence its objective of selection may not remain satisfied. Thus, it is required to study the cross section of different reactions on nuclear reactor materials to understand their sustainability for the properties, for which they are chosen. In the scope of this study, theoretically, different level density model calculations and γ-ray strength functions have been performed for (γ, p) reaction for 16,18O and 24,26Mg nuclei using TALYS 1.9 and EMPI˙RE 3.2.2 codes. Also, semi empirical (γ, p) formula by Tel et al., have been calculated and compared with all results. The effect of different level density models defined in these codes on gamma strength has been studied. Finally, the consistency of these obtained data with EXFOR data have been investigated.