Labour Costs on the Vegetables: A Research on the location effect on salaries in Jiangsu Province, China

ABSTRACT: In this study, the labour requirement and labour cost of common vegetable cultivation were investigated to help agricultural enterprises and family farms establishing reasonable “working hour” management systems in Jiangsu Province. The labour requirement of each step of three type of producers, agriculture enterprises, family farms, and private vegetable growers, in three regions in Jiangsu Province, named north, middle and south Jiangsu, was investigated by on-site observation or questionnaire survey during 2018 and 2019. The labour cost of each step and each vegetable was counted according to the labour requirement and the salary level. The results indicated that “residue cleaning”, “soil preparation and bedding”, “plant regulation”, “auxin treatment of tomato flowers” and “hand pollination” accounted for higher proportions of labour cost amongst the entire vegetable culture process. No significant differences in the labour requirements of the investigated vegetables were reported amongst three regions in Jiangsu Province. However, the order of labour cost is south Jiangsu > north Jiangsu > middle Jiangsu, due to the salary difference amongst three regions. Watermelon, broccoli and chive are more suitable for growing by agricultural enterprises since they have relatively low unit labour and high prices. We established a method to calculate and analyze labour requirement and cost of vegetable production in Jiangsu Province, which also may be instructive for other regions. In addition, our results provided useful data for various vegetable producers to improve their labour management.

Reproductive barriers in cassava: Factors and implications for genetic improvement

Cassava breeding is hampered by high flower abortion rates that prevent efficient recombination among promising clones. To better understand the factors causing flower abortion and propose strategies to overcome them, we 1) analyzed the reproductive barriers to intraspecific crossing, 2) evaluated pollen-pistil interactions to maximize hand pollination efficiency, and 3) identified the population structure of elite parental clones. From 2016 to 2018, the abortion and fertilization rates of 5,748 hand crossings involving 91 parents and 157 progenies were estimated. We used 16,300 single nucleotide polymorphism markers to study the parents’ population structure via discriminant analysis of principal components, and three clusters were identified. To test for male and female effects, we used a mixed model in which the environment (month and year) was fixed, while female and male (nested to female) were random effects. Regardless of the population structure, significant parental effects were identified for abortion and fertilization rates, suggesting the existence of reproductive barriers among certain cassava clones. Matching ability between cassava parents was significant for pollen grains that adhered to the stigma surface, germinated pollen grains, and the number of fertilized ovules. Non-additive genetic effects were important to the inheritance of these traits. Pollen viability and pollen-pistil interactions in cross- and self-pollination were also investigated to characterize pollen-stigma compatibility. Various events related to pollen tube growth dynamics indicated fertilization abnormalities. These abnormalities included the reticulated deposition of callose in the pollen tube, pollen tube growth cessation in a specific region of the stylet, and low pollen grain germination rate. Generally, pollen viability and stigma receptivity varied depending on the clone and flowering stage and were lost during flowering. This study provides novel insights into cassava reproduction that can assist in practical crossing and maximize the recombination of contrasting clones.

Polygamous breeding system identified in the distylous genus Psychotria: P. manillensis in the Ryukyu archipelago, Japan

Distyly is a genetic polymorphism composed of long-and short-styled flowers in a population. The evolutionary breakdown of distyly has been reported in many taxa, and mainly involves a shift toward monomorphism or dioecism. However, a shift toward monoecism has not been reported in distylous species. Psychotria (Rubiaceae), one of the world largest genera, consists of distylous species and their derivatives. In our preliminary study, however, we identified some monoecious individuals in a population of Psychotria manillensis. To understand the breeding system and reproductive biology of P. manillensis, we investigated floral traits, open fruit set, and flower visitors, and performed hand pollination and bagging experiments in five populations of Okinawa and Iriomote islands, Ryukyu Islands, Japan. The populations of P. manillensis were composed mainly of monoecious individuals (54%), followed by female (30%), male (14%), and hermaphroditic (2%) individuals at the time of flower collection. Of the collected flowers, 93% were functionally unisexual (male or female), whereas only 6.5% were perfect (hermaphroditic). However, some individuals changed sex mainly towards increasing femaleness during the flowering period. Moreover, 35% of the studied plants changed their sexual expression over the years. P. manillensis showed self-compatibility and no agamospermy. The fruit set under open pollination varied among populations and years (1.8–21.9%), but it was significantly higher than that of auto-selfing (0.68–1.56%). Wasps and flies were the main flower visitors and probably the main pollinators of the species. In conclusion, P. manillensis was revealed to be polygamous, involving monoecious, female, male, and hermaphroditic individuals. This is the first report of the polygamous breeding system not only in the genus Psychotria, but also in all heterostylous taxa.

Measurement of inbreeding depression in Rhododendron kaempferi: seed production, germination, juvenile survival, and growth

To understand the reproductive ecology of a plant species with both selfing and outcrossing reproductive systems, it is important to know how selfed individuals contribute to the maintenance of a population. Further, examination of the magnitude of inbreeding depression after pollination is essential for accurate measurement of reproductive success. In this study, we investigated the characteristics of viable seeds and seedlings of Rhododendron kaempferi in a region where the bumblebee pollinator Bombus ardens are abundant. In a hand-pollination experiment, the fruit set from self-pollination was 32%, significantly lower than that from outcross-pollination (81%). The number of seeds per fruit from self-pollination was one sixth the number from outcross-pollination. However, the number of seeds per fruit was negatively correlated with the weight per seed. In addition, the germination rate was low when the seed weight was light. Although selfed seeds could germinate, 89% of the seedlings died within a year. The inbreeding depression coefficient 1 year after sowing was very high (0.89). These results indicate that R. kaempferi shows extremely strong selection for outcrossing but maintains a slight selfing potential in a natural population in central Japan.

Use of timelapse photography to determine flower opening time and pattern in banana (Musa spp.) for efficient hand pollination

Sterility and low seed set in bananas is the main challenge to their conventional genetic improvement. The first step to seed set in a banana breeding program depends on pollination at the right time to ensure effective fertilization. This study aimed at determining bract opening time (BOT) to enhance efficient pollination and seed set in bananas. A Nikon D810 digital camera was set-up to take pictures of growing banana inflorescences at five-minute intervals and time-lapse movies were developed at a speed of 30 frames per second to allow real-time monitoring of BOT. Genotypes studied included wild banana (1), Mchare (2), Matooke (4), Matooke hybrid (1), and plantain (1). Events of bract opening initiated by bract lift for female flowers (P < 0.01) started at 16:32 h and at 18:54 h for male flowers. Start of bract rolling was at 18:51 h among female flowers (P < 0.001) and 20:48 h for male flowers. Bracts ended rolling at 02:33 h and 01:16 h for female and flowers respectively (P < 0.05). Total time of bract opening (from lift to end of rolling) for female flowers was significantly longer than that of male flowers (P < 0.001). On average, the number of bracts subtending female flowers opening increased from one on the first day, to between one and four on the fourth day. The number regressed to one bract on day eight before start of opening of bracts subtending male flowers. There was a longer opening interval between bracts subtending female and male flowers constituting spatial and temporal separation. Bract rolling increased from partial to complete rolling from proximal to the distal end of the inflorescence among female flower. On the other hand, bracts subtending male flowers completely rolled. Differences in BOT of genotypes with the same reference time of assessment may be partly responsible for variable fertility. Hand pollination time between 07:00 and 10:00 h is slightly late thus an early feasible time should be tried.

An easy-to-manage two-entrance honey bee hive system for greenhouse pollination that improves fruit production

An alternative two-entrance hive system demonstrated here is less taxing for the bee colonies. Bees are directed to forage inside the greenhouse when the crop is in flower, and only have access to the outside after anthesis. Consequently, there are no bees in the greenhouse in the afternoon, facilitating crop management. This system allows the farmer to control bee access to the crop without the need for a smoker or protective equipment. Using this system, we compared pollination by honey bees (Apis mellifera) to hand pollination of zucchini squash (Cucurbita pepo) in greenhouses, during two crop seasons. Data included number of flower visits by the bees, fruit production, and the time and consequent labor costs needed to control bee flight direction versus the costs of hand pollination. In the greenhouses with bees, each female flower received a mean of more than 40 bee visits. When eight or more bees visited a flower, the fruits were significantly heavier than with manual pollination (313 versus 232 g, respectively). Total production was increased 41% with bee pollination. Using bee pollination increased profit over 12%, taking into account hive rental and labor costs for hand pollination versus manipulating the hive entrances.

Cross-pollination affects fruit colour, acidity, firmness and shelf life of self-compatible strawberry

Cross-pollination affects the fruit characteristics of many crops but the effects of cross-pollination on fruit quality of strawberry (Fragaria × ananassa Duch.) are poorly known. This study determined how cross-pollination affects fruit quality of the strawberry cultivar, Redlands Joy, under controlled environment conditions. Plants were allocated to one of four treatments, with all flowers on each plant receiving either: (1) unassisted self-pollination (Autogamy); (2) hand-pollination with Redlands Joy pollen (Self); (3) hand-pollination with cross-pollen from a small-fruited cultivar (Sugarbaby); or (4) hand-pollination with cross-pollen from a large-fruited cultivar (Rubygem). Cross-pollination did not significantly affect plant yield or fruit mass, size, shape, firmness or shelf life. However, cross-pollination affected fruit colour and taste attributes. Cross-pollinated fruit were 3%–5% darker than self-pollinated fruit. They also had 26%–34% lower acidity and 43%–58% higher Brix:acid ratio. Cross-pollination by Sugarbaby increased fruit P, K, Ca, Fe and Mn, but decreased B, Cu and Zn, concentrations. Cross-pollination by Rubygem increased fruit Mn, but decreased K and Na, concentrations and reduced shelf life. Fruit mass, length, diameter and firmness within all treatments increased with increasing numbers of fertilized seeds per fruit. Hand self-pollinated fruit had a higher percentage of fertilized seeds than fruit arising from autogamy and they were also darker, redder, firmer, and had a longer shelf life, higher protein concentration, and lower Al and Na concentrations. The results indicate that strawberry fruit quality can be affected by both the source of pollen and the number of stigmas pollinated.

Assessing the effectiveness of honey bee pollinators for cultivated blueberries in South Africa

Globally, agricultural crops are often dependent on insect pollination. Blueberries are an example of such a crop and owing to their proposed health benefits they are grown around the world, including locations where their native bumble bee pollinators do not occur. In the absence of bumble bees, blueberry pollination in South Africa and many other parts of the non-native, commercial range is performed primarily by honey bees. Despite this, the effectiveness of honey bee pollination on blueberries remains understudied. This study determined the effect of honey bee pollination on components of fruit yield (fruit set and mass) of five blueberry varieties that are extensively planted in South Africa. For each variety, two metrics were calculated: 1) the benefit of bees — a comparison of fruit yields after exposure to honey bees and fruit yields after honey bee exclusion, 2) the pollination deficit — the difference in yield between hand pollination (maximum yield potential) and yields after exposure to honey bee pollinators. Honey bee pollination consistently resulted in improved yields, although the magnitude of this improvement (i.e., the benefit of bees) was dependent on the variety considered. Similarly, the pollination deficit also varied considerably across varieties and while some varieties appeared to perform close to maximum potential (small pollination deficit), others yielded well below their maximum potential under honey bee pollination. This study demonstrates that honey bees are functional pollinators of blueberries in areas where native blueberry pollinators are absent. However, in such areas, it is important that special focus be given to selecting blueberry varieties that perform well with honey bees as their sole pollinator. Further research is necessary to determine how the pollination deficit of blueberry varieties can be decreased as well as how to increase the effectiveness of honey bee pollination.

Pollination and Plant Reproductive Success of Two Ploidy Levels in Red Clover (Trifolium pratense L.)

Plant reproduction in red clover requires cross-fertilization via insect pollination. However, the influences of visitation rate and timing on maximizing ovule utilization are yet to be determined. We aimed to study the influences of visitation rate, flowering stage, and self-incompatibility on reproductive success. We applied hand and honey bee pollination in the study of eight red clover cultivars with two ploidy levels released between 1964 and 2001. In hand pollination, increasing the visitation rates (from 10 to 80 pollinated florets per flower head) increased the seed number per flower head but reduced the seed number per pollinated floret. Different flowering stages (early, middle, and full flowering) did not influence the seed number per pollinated floret significantly. There was a marked difference in reproductive success depending on the ploidy level, with 0.52 seeds per pollinated floret in diploid and 0.16 in tetraploid cultivars. During the cultivar release history, seed number per pollinated floret seemed to decrease in diploid cultivars, whereas it increased in tetraploids. In honey bee pollination, diploid cultivars had more two-seeded florets than tetraploids. Different visitation rates and the stochastic nature of pollen transfer resulted in difficulties when the plant reproductive success between hand and bee pollination was compared. A maximum of 0.27 seeds per pollinated floret were produced in hand pollination compared to the 0.34 in honey bee pollination. In spite of this, hand pollination provided a valuable method for studying the pollination biology and reproduction of red clover. Future studies may employ hand pollination to unravel further aspects of the low reproductive success with the future perspective of improving seed number per pollinated floret in tetraploid red clover.