Analysis of technical solutions of stacks in high-rise buildings

Nowadays, due to the maximum use of building lands, high-rise buildings in the cities are coming to the forefront of construction. A high-rise building is a building that, due to its height, requires a different technical, technological and structural design. Due to the increasing floors of buildings, more and more demands are placed on sanitary installations in terms of hygiene and quality of distribution. With the drainage in a high-rise building, the biggest problem arises in the design of stacks, which must be given individual attention. Foul water stacks must be designed in such a way that the overpressure and negative pressure created in them do not cause the extraction of water from traps and thus the spread of unpleasant smell in the building. Fluctuations in the pressure in stacks are influenced by many other factors, such as the method of venting of the stack, the fitting used on the stack, or the transition of the stack to the drain. When dimensioning stacks in addition to the correct design, it is also necessary to use a suitable system, which significantly affects the investment costs. A properly chosen system can save a lot of money that could arise from excessive dimensions, unnecessary fire protection systems, or anchorages. The paper deals with a theoretical analysis of modern technical solutions that positively affect pressure fluctuations in waste water pipes in high-rise buildings.

Research on Water Content and Physicochemical Properties of Insulating Materials for Water-Soaked XLPE Cable

The buried environment of cross-linked polyethylene (XPLE) cable is relatively severe, and some ones are even immersed in water directly. In this paper, an XLPE cable was soaked in foul water to simulate the cable’s actual water area environment, lasting for three years. The water content in the insulation layers of water-soaked cable was measured by infrared spectrometer and moisture analyzer, and the crystal morphology and physicochemical properties of the insulation layers were investigated by differential Scanning Calorimeter (DSC), scanning electron microscopy (SEM) and tensile testing technology. The results showed that a small amount of water did enter into the cable insulation owing to the increasing of hydroxyl (-OH) content, and followed being verified by moisture analyzer. The degree of crystallinity of water-soaked cable insulating material is also increased, and the mechanical properties were deteriorated.

ON BABYLONIAN LAVATORIES AND SEWERS

This study begins by examining the archaeological and documentary evidence for lavatories (toilets) and foul-water drains in ancient Mesopotamian dwelling houses. It goes on to investigate the use, etymology and history of the Akkadian wordasurrû: in the Old Babylonian period it served mainly as a term for a kind of foul-water drain or “sewer” but later shed that meaning.

Searching for storm water inflows in foul sewers using fibre-optic distributed temperature sensing

A major drawback of separate sewer systems is the occurrence of illicit connections: unintended sewer cross-connections that connect foul water outlets from residential or industrial premises to the storm water system and/or storm water outlets to the foul sewer system. The amount of unwanted storm water in foul sewer systems can be significant, resulting in a number of detrimental effects on the performance of the wastewater system. Efficient removal of storm water inflows into foul sewers requires knowledge of the exact locations of the inflows. This paper presents the use of distributed temperature sensing (DTS) monitoring data to localize illicit storm water inflows into foul sewer systems. Data results from two monitoring campaigns in foul sewer systems in the Netherlands and Germany are presented. For both areas a number of storm water inflow locations can be derived from the data. Storm water inflow can only be detected as long as the temperature of this inflow differs from the in-sewer temperatures prior to the event. Also, the in-sewer propagation of storm and wastewater can be monitored, enabling a detailed view on advection.

The management and treatment of combined storm flows in Jersey

This paper addresses processes and strategies used to minimise the frequency of foul water overflows to sea. Conventional and unconventional storage structures are described together with new techniques used to improve the quality of final effluent flowing from the treatment works.