ANALISIS KESTABILAN LERENG DINDING AKHIR DI PIT BARATLAUT PADA PENAMBANGAN BATUBARA DI PT. PUTERA BARA MITRA , KECAMATAN MENTEWE, KALIMANTAN SELATAN

PT. Putera Bara Mitra used open mining system for mining operation, Yet the completion of study on the end wall slope stability that undertaken by geotechnical PT. Putera Bara Mitra in Northwest Pit and the occured a failure in the low wall on the 1st June 2012 led to the need for analysis and design the overall slope at the mine site. To analyze and design the overall slope, used value of the recommended minimum safety. The value was based on company for single slope SF ≥ 1.2 and SF ≥ 1.3 for overall slope. The calculation used Bichop method with the help of software slide v 5.0. Geometry improvements was done at the low slopes that originally single wall with a 30 m bench height and a slope 70° with SF = 0.781, into 4 levels with SF = 1.305. The analysis explained the factors that affect the stability of the low wall included the mining slope geometry, unfavorable drainase system, material stockpiles and seismicity factors. It was necessary to do prevention efforts to maintain the stability of the slope included the redesign to slope geometry, handling surface and subsurface water in a way to control slopes draining groundwater, vegetation stabilization using and monitoring slope using Total Station with Prism and Crackmeter to determine the movement of cracks visible on the surface.

Analysis of the Open-Pit to Underground Mining Slope Stability

This paper uses the simulation technology of computer numerical simulation, combined with the GAMBIT numerical modeling software and ANSYS structure analysis software, we carry out an in-depth research and analysis on the stability of engineering simulation, at the same times establish the mathematical model of ANSYS numerical simulation displacement stability and design the ANSYS command stream program algorithm. Finally, this paper uses the open-pit to underground mining slope stability as an example, to verify the reliability of the model and algorithm. Through the numerical simulation, we get the displacement of slope in the Y direction and Z direction. In the Y direction, the maximum displacement is 0m, the negative maximum displacement is 5.88m and displacement is relatively large; in the Z direction, the maximum displacement is 1.32M, the negative maximum displacement is 1.08M and the stability of slope is different in different position. The numerical simulation provides the theory reference for the safety of mining engineering.

Numerical Simulation of Slope Stability in the First Mining of Open-Pit Coal Mine

This paper analysis open-pit coal mine slope stability in the first mining with FLAC3D, reveal the mechanism of slope deformation, through analysis the stress and strain nephogram of model ZK8 of the first mining slope, and calculation safety stability coefficient, finally concluding stope slope of the first mining occur slip as circular form under their own gravity. The safety factor of model ZK8 is more than stope slope safety coefficient 1.20, slope is in steady state, obtained the accurate and reliable analysis results of stability.

Application of TEM in Goaf Exploration

The basic principle of transient electromagnetic method (TEM) is introduced in this paper, and it was used to explore position of the goaf which existed under Fushun east open-pit mining slope systematically. Inversion based on results of the exploration determines the location of dangerous abnormal area, provides a theory support for next exploration drilling, avoids too high economic loss because of blindly exploration drilling, and provides scientific basis for mining design and safety production of open-pit.

Analysis of Influence Characteristics on Slope Stability of Underground Mining in Slope Outer Zone

Under the action of surface-underground unite mining, Slope stability is related to underground mining location and mining space dimension, This paper studies the underground mining of slope outer region on slope stability influence characteristic; With the increase of mining width stability coefficient increases, when mining width reach a certain value stability coefficient tends to constant; With the increase of mining depth stability coefficient increases, when mining depth reaching a certain value stability coefficient began to decrease; this show that the underground mining has a direct effect on slope stability, its size needs a combination of their relative spatial position relation and mining geometric size to determine.

Development of Monitoring Open Mining Slope on TM30

Discuss monitoring way of slope sliding of ANGANG open mine on Robotic Measuring System TM30 technology and processing data’s method, according to survey speciafication of deformation observation, analyses deformation result and compares it with speciafication of deformation observation, reports it to the mine company to insure safety and stability of mine produce. Deformation monitoring on Robotic total station TM30 that is Observation flexible, high precision and high efficiency is worth spreading.