Water-soluble CMY primary color electrochromic polymers: Design, Synthesis and Full Color Control

The next generation of electrochromic materials are required to be rich in color rendering, excellent processability and environmental protection. Soluble electrochromic polymer (ECP) can fulfill these requirements. However, a more...

Electrosynthesis of Electrochromic Polymer Membranes Based on 3,6-Di(2-thienyl)carbazole and Thiophene Derivatives

Five carbazole-containing polymeric membranes (PDTC, P(DTC-co-BTP), P(DTC-co-BTP2), P(DTC-co-TF), and P(DTC-co-TF2)) were electrodeposited on transparent conductive electrodes. P(DTC-co-BTP2) shows a high ΔT (68.4%) at 855 nm. The multichromic properties of P(DTC-co-TF2) membrane range between dark yellow, yellowish-green, gunmetal gray, and dark gray in various reduced and oxidized states. Polymer-based organic electrochromic devices are assembled using 2,2′-bithiophene- and 2-(2-thienyl)furan-based copolymers as anodic membranes, and poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) (PEDOT-PSS) as the cathodic membrane. P(DTC-co-TF)/PEDOT-PSS electrochromic device (ECD) displays a high transmittance change (ΔT%) (43.4%) at 627 nm as well as a rapid switching time (less than 0.6 s) from a colored to a bleached state. Moreover, P(DTC-co-TF2)/PEDOT-PSS ECD shows satisfactory optical memory (the transmittance change is less than 2.9% in the colored state) and high coloration efficiency (512.6 cm2 C−1) at 627 nm.

Black-to-Transparent Electrochromic Capacitive Windows Based on Conjugated Polymers

A black-to-transparent electrochromic capacitive window (BTECCW) is explored through the combination of a dual electrochromic polymer (ECP) and a capacitive polymer layer. A black-colored polymer (PEB1) is obtained using 3,3-bis((2-ethylhexyloxy)methyl)-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine...

Electrosynthesis and Electrochromism of a New Crosslinked Polydithienylpyrrole with Diphenylpyrenylamine Subunits

A new electroactive monomer with two 2,5-di(2-thienyl)pyrrole (SNS) units and one diphenylpyrenylamine (DPPA) subunit, namely N,N-bis(4-(2,5-di(2-thienyl)-1H-pyrrol-1-yl)-phenyl)-1-aminopyrene (DPPA-2SNS), was synthesized from 1,4-di-(2-thienyl)butane-1,4-dione with N,N-di(4-aminophenyl)-1-aminopyrene through the Paal–Knorr condensation reaction. Visible and near-infrared (NIR) electrochromic polymer films could be facilely generated on the ITO-glass surface by the electrochemical polymerization of DPPA-2SNS in an electrolyte solution. The electro-synthesized polymer films exhibit multi-staged redox processes and multi-colored anodic electrochromic behavior. A multi-colored electrochromism, with yellowish orange, greyish blue, and purplish black colors, was observed in the polymer film by applying a positive potential. The polymer films exhibit reasonable coloration efficiency, fast response time, and good cycling stability, especially when switched between neutral and the first oxidation states. For comparison, N-(1-pyrenyl)-2,5-di(2-thienyl)pyrrole (Py-SNS) was also prepared and characterized with electrochemical and electro-optical properties.