Analytical Study of Heat Transfer of a Unsteady Newtonian Nanofluid Flow Problem

Heat transfer behavior of unsteady flow of squeezing nanofluid (Copper+water) between two parallel plates is investigated. By using the appropriate transformation for the velocity and temperature, the basic equations governing the flow and heat transfer were reduced to a set of ordinary differential equations. These equations subjected to the associated boundary conditions were solved analytically using Homotopy Perturbation Method and numerically using Runge-Kutta-Fehlberg method with shooting technique. Effects on the behavior of velocity and temperature for various values of relevant parameters are illustrated graphically. The skin-friction coefficient, heat transfer and Nusselt number rate are also tabulated for various governing parameters. The results indicate that, for nanofluid flow, the rates of heat transfer and velocity had direct relationship with squeeze number and nanoparticle volume fraction they are also a decreasing function of those parameters

Heat and Mass Transfer in an Unsteady Magnetohydrodynamics Al2O3–Water Nanofluid Squeezed Between Two Parallel Radiating Plates Embedded in Porous Media With Chemical Reaction

In this paper, the influence of chemical reaction and heat source/sink on an unsteady magnetohydrodynamics (MHD) nanofluid flow that squeezed between two radiating parallel plates embedded in porous media is investigated analytically. We consider water as base fluid and aluminum oxide (Al2O3) as its nanoparticle. We reduced the basic partial differential equations to ordinary differential equations which are solved by the homotopy analysis method (HAM). The effects of the squeeze number, permeability parameter of porous media, Hartmann number, thermal radiation parameter, Prandtl number, heat source/sink parameter, Eckert number, Schmidt number, and scaled parameter of chemical reaction on the flow, heat, and mass transfer are considered and assigned to graphs. The physical quantities such as Sherwood number, Nusselt number, and skin friction coefficient are computed for Al2O3–water, TiO2–water, Ag–water, and Cu–water nanofluids and assigned through graphs.

Transient nanofluid squeezing cooling process using aluminum oxide nanoparticle

Computational studies have been widely applied for the thermal evaluation of the nanomaterial thermal feature in different industrial and scientific issues. The squeezed flow and heat transfer features for Al2O3-water nanofluid among analogous plates are investigated using the GOHAM and its validity is verified by comparison with existing numerical results. Novel aspects of Brownian motion and thermal force were accounted in the simulation of nanomaterial flow within parallel plate. Analytical investigation has been done for diverse governing factors namely: the squeeze, chemical reaction factors and Eckert number. The obtained outcomes show that [Formula: see text] has direct relationship with absolute values of squeeze factor. Nu increases for large Eckert number and absolute values of squeeze number.

Effect of Aligned Magnetic Field on MHD Squeezing Flow of Casson Fluid between Parallel Plates

The two-dimensional unsteady magnetohydrodynamic squeezing flow and heat transfer of Casson fluid between two parallel plates with aligned magnetic field and nonlinear thermal radiation is investigated theoretically. The resulting governing equations are transformed as set of ODEs and solved numerically by using bvp4c Matlab package. The influence of various pertinent parameters on the flow and temperature fields are discussed with the assistance of graphical illustrations. The reduced Nusselt number are presented through graphs. It is seen that increasing values of squeeze number depreciate the flow and temperature fields.

Effect of adding nanoparticle on squeezing flow and heat transfer improvement using KKL model

Purpose Nanofluid flow which is squeezed between parallel plates is studied using differential transformation method (DTM). The fluid in the enclosure is water containing different types of nanoparticles: Al2O3 and CuO. The effective thermal conductivity and viscosity of nanofluid are calculated by Koo–Kleinstreuer–Li (KKL) correlation. The comparison between the results from DTM and numerical method are in well agreement which proofs the capability of this method for solving such problems. Effects of the squeeze number and nanofluid volume fraction on flow and heat transfer are examined. Results indicate that Nusselt number augment with increase of the nanoparticle volume fraction. Also, it can be found that heat transfer enhancement of CuO is higher than Al2O3. Design/methodology/approach The problem of nanofluid flow which is squeezed between parallel plates is investigated analytically using DTM. The fluid in the enclosure is water containing different types of nanoparticles: Al2O3 and CuO. The effective thermal conductivity and viscosity of nanofluid are calculated by KKL correlation. In this model, effect of Brownian motion on the effective thermal conductivity is considered. The comparison between the results from DTM and numerical method are in well agreement which proves the capability of this method for solving such problems. The effect of the squeeze number and the nanofluid volume fraction on flow and heat transfer is investigated. The results show that Nusselt number increase with increase of the nanoparticle volume fraction. Also, it can be found that heat transfer enhancement of CuO is higher than Al2O3. Findings The effect of the squeeze number and the nanofluid volume fraction on flow and heat transfer is investigated. The results show that Nusselt number increase with increase of the nanoparticle volume fraction. Also, it can be found that heat transfer enhancement of CuO is higher than Al2O3. Originality/value This paper is original.

The effect of variable magnetic field on heat transfer and flow analysis of unsteady squeezing nanofluid flow between parallel plates using Galerkin method

This paper presents a thermal and flow analysis of an unsteady squeezing nanofluid flow and heat transfer using nanofluid based on Brinkman model in presence of variable magnetic field. Galerkin method is used to solve the non-linear differential equations governing the problem. Squeezing flow between parallel plates is very applicable in the many industries and it means that one or both of the parallel plates have vacillation. The effects of active parameters such as the Hartman number, squeeze number, and heat source parameter are discussed. Results for temperature distribution and velocity profile, Nusselt number, and skin friction coefficient by Galerkin method are presented. As can be seen in results, the values of Nusselt number and skin friction coefficient for CuO is better than Al2O3. Also, according to figures, as nanofluid volume fraction increases, Nusselt number increases and skin friction coefficient decreases, increase in the Hartman number results in an increase in velocity and temperature profiles and an increase in squeeze number can be associated with the decrease in the velocity. <br><br><font color="red"><b> This article has been corrected. Link to the correction <u><a href="http://dx.doi.org/10.2298/TSCI171204246E">10.2298/TSCI171204246E</a><u></b></font>

MHD effect on nanofluid with energy and hydrothermal behavior between two collateral plates: Application of new semi analytical technique

In this study, heat and mass transfer characteristic of unsteady nanofluid flow between parallel plates is investigated. The important effect of Brownian motion and thermophoresis has been included in the model of nanofluid. The governing equations are solved via differential transformation method. The validity of this method was verified by comparison previous work which is done for viscous fluid. The analytical investigation is carried out for different governing parameters namely: the squeeze number, Hartmann number, Schmidt number, Brownian motion parameter, thermophoretic parameter, and Eckert number. The results indicate that skin friction coefficient has direct relationship with Hartmann number and squeeze number. Also it can be found that Nusselt number increases with increase of Hartmann number, Eckert number, and Schmidt number but it is decreases with augment of squeeze number.

Heat and Mass Transfer on Squeezing Unsteady MHD Nanofluid Flow between Parallel Plates with Slip Velocity Effect

Heat and mass transfer behavior of unsteady flow of squeezing nanofluids between two parallel plates in the sight of uniform magnetic field with slip velocity effect is investigated. The governing equations representing fluid flow have been transformed into nonlinear ordinary differential equations using similarity transformation. The equations thus obtained have been solved numerically using Runge-Kutta-Fehlberg method with shooting technique. Effects on the behavior of velocity, temperature, and concentration for various values of relevant parameters are illustrated graphically. The skin-friction coefficient and heat and mass transfer rate are also tabulated for various governing parameters. The results indicate that, for nanofluid flow, the rates of heat and mass transfer are inversely proportional to nanoparticle volume fraction and magnetic parameter. The rate of mass transfer increases with increasing values of Schmidt number and squeeze number.

Unsteady Squeezing Flow of Casson Fluid with Magnetohydrodynamic Effect and Passing through Porous Medium

An unsteady squeezing flow of Casson fluid having magnetohydrodynamic (MHD) effect and passing through porous medium channel is modeled and investigated. Similarity transformations are used to convert the partial differential equations (PDEs) of non-Newtonian fluid to a highly nonlinear fourth-order ordinary differential equation (ODE). The obtained boundary value problem is solved analytically by Homotopy Perturbation Method (HPM) and numerically by explicit Runge-Kutta method of order 4. For validity purpose, we compare the analytical and numerical results which show excellent agreement. Furthermore, comprehensive graphical analysis has been made to investigate the effects of various fluid parameters on the velocity profile. Analysis shows that positive and negative squeeze numberSqhave opposite effect on the velocity profile. It is also observed that Casson parameterβshows opposite effect on the velocity profile in case of positive and negative squeeze numberSq. MHD parameterMgand permeability constantMphave similar effects on the velocity profile in case of positive and negative squeeze numbers. It is also seen that, in case of positive squeeze number, similar velocity profiles have been obtained forβ,Mg, andMp. Besides this, analysis of skin friction coefficient has also been presented. It is observed that squeeze number, MHD parameter, and permeability parameter have direct relationship while Casson parameter has inverse relationship with skin friction coefficient.

Two-Dimensional and Axisymmetric Unsteady Flows due to Normally Expanding or Contracting Parallel Plates

The flow of a viscous incompressible fluid between two parallel plates due to the normal motion of the plates for two cases, the two-dimensional flow case and the axisymmetric flow case, is investigated. The governing nonlinear equations and their associated boundary conditions are transformed into a highly non-linear ordinary differential equation. The series solution of the problem is obtained by utilizing the homotopy perturbation method (HPM). Graphical results are presented to investigate the influence of the squeeze number on the velocity, skin friction, and pressure gradient. The validity of our solutions is verified by the numerical results obtained by shooting method, coupled with Runge-Kutta scheme.