Techno-economic analysis of nitrogen-doped graphene/water nanofluid in various heat exchangers (A unified analysis)

Nitrogen-doped graphene (NDG)/water nanofluid is one of the emerging working fluids toward achieving high heating rates in heat transfer devices. In the present study, thermal performance improvement and techno-economic analysis of a double pipe, shell and tube, and plate heat exchangers are presented while incorporating NDG/water nanofluid as a working fluid. The variable properties of NDG nanofluid are incorporated and the influence of nanoparticle concentrations and mass flow rates on the device thermal performance and related costs are evaluated. The findings demonstrate that device heat transfer area and costs are adversely affected by using NDG/water nanofluid in all types of heat exchanging devices considered. An increase in heat transfer area is associated with the decrease of the specific heat capacity of the working fluid. The increase of heat transfer area can be as high as 58.5%, 45.1%, and 67.0% for double pipe, shell and tube, and plate heat exchangers, respectively. In addition, area increase becomes persistent with other types of nanoparticles used in the carrier fluid.

Experimental and CFD Analysis of GW70 based Cu Nanofluids in a Parallel Flow Heat Exchanger

The Nusselt number, overall heat transfer, and convective heat transfer coefficients of glycerol-water-based Cu nanofluids flowing in a parallel flow double pipe heat exchanger are estimated using CFD analysis. Single-phase fluid approach technique is used in the analysis. Ansys 19.0 workbench was used to create the heat exchanger model. Heat transfer tests with nanofluids at three flow rates (680<Re<1900) are carried out in a laminar developing flow zone. For testing, a 500 mm long concentric double pipe heat exchanger with tube dimensions of ID=10.2 mm, OD= 12.7 mm, and annulus dimensions of ID=17.0 mm, OD= 19.5 mm is employed. Copper is utilized for the tube and annulus material. This study employed three-particle volume concentrations of 0.2 percent, 0.6 percent, and 1.0 percent. The mass flow rates of hot water in the tube are 0.2, 0.017, and 0.0085 kg/s, while the mass flow rates of nanofluids in the annulus are 0.03, 0.0255, and 0.017 kg/s. The average temperature of nanofluids is 36°C, whereas hot water is 58°C. In comparison to base liquid, the overall heat transfer coefficient and convective HTC of 1.0 percent copper nanofluids at 0.03 kg/s are raised by 26.2 and 46.2 percent, respectively. The experimental findings are compared to CFD values, and they are in close agreement.