Numerical simulation of high-current pulsed arc discharge in air

Computational model of high-current pulsed arcdischarge in air is proposed. This is, in general, two-dimensional model with taking into account gas dynamics of the discharge channel, real air thermodynamics in a wide range of pressure and temperature, electrodynamics of the discharge including pinch effect, and radiation. One-dimensional version of the model is tested and verified on several numerical and experimental works reported recently. It is concluded that low and moderate current discharges are satisfactorily described with the developed model. Then, developed model was applied to simulate the electric discharge in air for the currents of 1 - 250 kA and characteristic rise times in 13 - 25 µs, and results of calculations were compared with experimental ones. It was concluded that most of characteristics of the discharge are predicted well. Namely, arc column radius and shock wave position agree well with experimental data for all current amplitudes and rise times considered. Radial distributions of temperature and electron density also satisfactorily agree with experimental data. It was found that pinch effect should be considered for currents higher than 100 kA.

High-current arc discharge in air

Computational model of high-current pulsed arc discharge in air is proposed. This is, in general, two-dimensional model with taking into account gas dynamics of the discharge channel, real air thermodynamics in a wide range of pressure and temperature, electrodynamics of the discharge including pinch effect, and radiation. The developed model was applied to simulate the electric discharge in air for the currents of 1 - 250 kA and characteristic rise times in 13 - 25 µs, and results of calculations were compared with experimental ones. It was concluded that most of characteristics of the discharge are predicted well. Namely, arc column radius and shock wave position agree well with experimental data for all current amplitudes and rise times considered. Radial distributions of temperature and electron density also satisfactorily agree with experimental data. It was found that pinch effect should be considered for currents higher than 100 kA.

Flow separation control on a smooth ledge using an arc discharge in a magnetic field

This paper presents results of experimental study for surface MHD arc actuator as vortex generator in boundary layer of smooth ledge. The study was held at flow velocities 20 to 50 m/s. The pulsed arc discharge was organized in external magnetic field. The amplitude of current was 80 A, while pulse duration was 80 μs. The flow velocity was measured by PIV method. It was founded that the location of the arc breakdown is critically impotent. The arc must be struck just above the separation point. The operation of the actuator in a pulse-periodic mode leads to a shift in the middle position of the flow separation point at frequencies up to 700 Hz and higher. A three-dimensional analysis of the separation region structure behind the MHD actuator shows that the main effect on the flow occurs in the interelectrode gap.

Graphene Nanoparticle-Based, Nitrate Ion Sensor Characteristics

Gathering and sensing of nitrate ions in the environment due to the abundant use in industry and agriculture have become an important problem, which needs to be overcome. On the other hand, new materials such as carbon-based materials with unique properties have become an ideal choice in sensing technology. In this research, the high-density polyethylene (HDPE) polymer as a carbon source in the melted form was used and carbon nanoparticles in the form of a strand between two electrodes were analyzed. It was fabricated between copper electrodes by the pulsed arc discharge method. Subsequently, the constructed metal–nanoparticle–metal (MNM) contact was employed to recognize the nitrate ions. Therefore, NaNO3, Pb(NO3)2, Zn(NO3)2, and NH4NO3 samples as a usual pollutant of industrial and agricultural wastewater were examined. All nitrate compounds in ten different densities were tested and sensor I-V characteristic was investigated, which showed that all the aforesaid compounds were recognizable by the graphene nano-strand. Additionally, the proposed structure in the presence of ions was simulated and acceptable agreement between them was reported. Additionally, the proposed structure analytically was investigated, and a comparison study between the proposed model and measured results was carried out and realistic agreement reported.