Overview of the Semiconductor Photocathode Research in China

With the growing demand from scientific projects such as the X-ray free electron laser (XFEL), ultrafast electron diffraction/microscopy (UED/UEM) and electron ion collider (EIC), the semiconductor photocathode, which is a key technique for a high brightness electron source, has been widely studied in China. Several fabrication systems have been designed and constructed in different institutes and the vacuum of most systems is in the low 10−8 Pa level to grow a high QE and long lifetime photocathode. The QE, dark lifetime/bunch lifetime, spectral response and QE map of photocathodes with different kinds of materials, such as bialkali (K2CsSb, K2NaSb, etc.), Cs2Te and GaAs, have been investigated. These photocathodes will be used to deliver electron beams in a high voltage DC gun, a normal conducting RF gun, and an SRF gun. The emission physics of the semiconductor photocathode and intrinsic emittance reduction are also studied.

Operation influence on structural and phase condition of 0.12C-1Cr-1Mo-1V-Fe steel

By the method of transmission electron diffraction microscopy the study of 0.12C-1Cr-1Mo-1V-Fe steel samples subjected to various long-term operation was conducted: 1) on the unfinished sample, 2) after prolonged operation without sample destruction, and 3) after prolonged operation brought to sample destruction. For each sample the phase composition was determined and the change in morphology of the structure was studied. It is established that operation of steel leads, firstly, to the destruction of plate pearlite and intensive ferrite fragmentation, secondly, to the redistribution of carbide component and, thirdly, to elastic distortion of the crystal lattice.

Physical Nature of Structure and Properties Degradation of Rail Surface after Long Term Operation

By methods of optical, scanning and transmission electron diffraction microscopy and microhardness and tribology parameters measurement the changes regularities of structure-phase states, defect substructure of rails surface after the long term operation (passed tonnage of gross weight 500 and 1000 mln. tons) were established. It is shown that the wear rate increases in 3 and 3.4 times after passed tonnage of gross weight 500 and 1000 mln. tons, accordingly, and the friction coefficient decreases in 1.4 and 1.1 times. The cementite plates are destroying absolutely and cementite particles of around form with the sizes 10-50 nm are forming after passed tonnage 500 mln tons. The appearance of dynamical recrystallization initial stages is marked after the passed tonnage 1000 mln tons. It is shown that the operation of steel rails is accompanied by full fractures in surface layers with lamellar pearlite grains and the formation of ferrite–carbide mixtures with nanosized particles. The deformation of steel increases the densities of scalar and excess dislocations, the curvature–torsion values of the crystal lattice, and the amplitudes of internal stress fields. The possible mechanisms of established regularities are discussed. It is noted that two competitive processes can take place during rails long term operation: 1. Process of cutting of cementite particles followed by their carrying out into the volume of ferrite grains or plates (in the structure of pearlite). 2. Process of cutting, the subsequent dissolution of cementite particles, transition of carbon atoms to dislocations (into Cottrell atmospheres), transition of carbon atoms by dislocations into volume of ferrite grains or plates followed by repeat formation of nanosize cementite particles.

The Influence of Electron Beam Treatment on Al-Si Alloy Structure Destroyed at High-Cycle Fatigue

By scanning and transmission electron diffraction microscopy method the analysis of structure-phase states and defect substructure of silumin subjected to high-intensity electron beam irradiation in various regimes and subsequent fatigue loading up to failure was carried out. It is revealed that the sources of fatigue microcracks are silicon plates of micron and submicron sizes that are not soluble in electron beam processing. The possible reasons of the silumin fatigue life increase under electron-beam treatment are discussed.