Structures and physical properties of rigid polyurethane foam prepared with rosin-based polyol

2002 ◽  
Vol 84 (3) ◽  
pp. 598-604 ◽  
Author(s):  
Jian Feng Jin ◽  
Yong Ling Chen ◽  
De Ning Wang ◽  
Chun Pu Hu ◽  
Stella Zhu ◽  
...  
Keyword(s):  
Physical Properties ◽  
Polyurethane Foam ◽  
Rigid Polyurethane Foam

Flame retarded rigid polyurethane foam composites based on gel-silica microencapsulated ammonium polyphosphate

2021 ◽  
Vol 98 (1) ◽  
pp. 212-223 ◽  
Author(s):  
Yadong Yang ◽  
Wen Chen ◽  
Mengru Liu ◽  
Qingming Zhu ◽  
Xinliang Liu ◽  
...  
Keyword(s):  
Polyurethane Foam ◽  
Ammonium Polyphosphate ◽  
Rigid Polyurethane Foam ◽  
Flame Retarded ◽  
Microencapsulated Ammonium Polyphosphate

Experimental study of horizontal flame spread over rigid polyurethane foam on a plateau: effects of sample width and ambient pressure

2014 ◽  
Vol 39 (2) ◽  
pp. 127-138 ◽  
Author(s):  
Y. Zhou ◽  
H. H. Xiao ◽  
J. H. Sun ◽  
X. N. Zhang ◽  
W. G. Yan ◽  
...  
Keyword(s):  
Experimental Study ◽  
Polyurethane Foam ◽  
Flame Spread ◽  
Ambient Pressure ◽  
Rigid Polyurethane Foam ◽  
Sample Width

Development of mass production type rigid polyurethane foam for LNG carrier using ozone depletion free blowing agent

Cryogenics ◽  
2016 ◽  
Vol 80 ◽  
pp. 44-51 ◽  
Author(s):  
Yeongbeom Lee ◽  
Kye Hyun Baek ◽  
Kunhyung Choe ◽  
Chonghun Han
Keyword(s):  
Polyurethane Foam ◽  
Ozone Depletion ◽  
Mass Production ◽  
Rigid Polyurethane Foam ◽  
Blowing Agent ◽  
Production Type

The Study of Melamine Modified by Imidazolium Based Ionic Liquid [BMIM]PF6 on the Flame Retardancy of Rigid Polyurethane Foam

2014 ◽  
Vol 1030-1032 ◽  
pp. 241-245 ◽  
Author(s):  
Yan Wei Li
Keyword(s):  
Ionic Liquid ◽  
Flame Retardant ◽  
Polyurethane Foam ◽  
Fire Retardant ◽  
Rigid Polyurethane Foam ◽  
Flame Resistance ◽  
Initial Decomposition Temperature ◽  
Noticeable Effect ◽  
Rigid Foam ◽  
Flame Retardant Properties

In this paper, the effect of C3H6N6modified by imidazolium based Ionic Liquid 1-butyl-methylimidazolium hexafluorophosphate ([BMIM]PF6) on polyurethane rigid foam flame retardant properties was conducted.The results show that the flame retardant properties of C3H6N6 modified with Ionic Liquid significantly increased and the LOI increased form 22.3 to 24.5. In the modification process, the ionic liquid mass have a very noticeable effect to the flame retardant property and when [BMIM]PF6 and C3H6N6 in quality was 4:6, Fire-retardant effect was best.Compared with the prior to the modification, C3H6N6 modified can increase effective Flame resistance of materials, horizontal burning speed from 67.6mm/min down to 33.4mm/min.Thermal degradation data show that C3H6N6 modified could improve initial decomposition temperature and reminder yield of rigid polyurethane foam,and then heat release reduced, the decomposition controlled,thermal stability increased.

scholarly journals Bio-based rigid polyurethane foam prepared from apricot stone shell-based polyol for thermal insulation application – Part 2: Morphological, mechanical, and thermal properties

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 6080-6094
Author(s):  
Muhammed Said Fidan ◽  
Murat Ertaş
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Polyurethane Foam ◽  
Flame Retardants ◽  
Compressive Modulus ◽  
Cell Diameter ◽  
Mechanical And Thermal Properties ◽  
Rigid Polyurethane Foam

The procedure for the liquefaction of apricot stone shells was reported in Part 1. Part 2 of this work determines the morphological, mechanical, and thermal properties of the bio-based rigid polyurethane foam composites (RPUFc). In this study, the thermal conductivity, compressive strength, compressive modulus, thermogravimetric analysis, flammability tests (horizontal burning and limited oxygen index (LOI)) in the flame retardants), and scanning electron microscope (SEM) (cell diameter in the SEM) tests of the RPUFc were performed and compared with control samples. The results showed the thermal conductivity (0.0342 to 0.0362 mW/mK), compressive strength (10.5 to 14.9 kPa), compressive modulus (179.9 to 180.3 kPa), decomposition and residue in the thermogravimetric analysis (230 to 491 °C, 15.31 to 21.61%), UL-94 and LOI in the flame retardants (539.5 to 591.1 mm/min, 17.8 to 18.5%), and cell diameter in the SEM (50.6 to 347.5 μm) of RPUFc attained from liquefied biomass. The results were similar to those of foams obtained from industrial RPUFs, and demonstrated that bio-based RPUFc obtained from liquefied apricot stone shells could be used as a reinforcement filler in the preparation of RPUFs, specifically in construction and insulation materials. Moreover, liquefied apricot stone shell products have potential to be fabricated into rigid polyurethane foam composites.

Sign in / Sign up

Export Citation Format

Share Document