Oxygen barrier coating deposited by novel plasma-enhanced chemical vapor deposition

AbstractGadolinium zirconate (GZ) is a promising candidate for next-generation thermal barrier coating (TBC) materials. Its corrosion resistance against calcium-magnesium-alumino-silicate (CMAS) needs to be further increased for enhancing its in-service life. As the Gd element plays an important role in the CMAS resistance, three GZ coatings (GZ-0.75, GZ-1.0, and GZ-1.2) with different Gd/Zr atomic ratios are designed and deposited by laser enhanced chemical vapor deposition (LCVD) in this work. It is found that the generated Gd-apatite in GZ-1.2 would block micro-cracks inside the column structure and the inter-columnar gap more efficiently. Thus, the CMAS penetration rate (5.2 μm/h) of GZ-1.2 decreases over 27% comparing with GZ-1.0 and GZ-0.75, which is even lower than the Gd2Zr2O7 coatings fabricated by electron-beam physical vapor depositions (EB-PVDs). This work provides a feasible way to adjust the coating’s corrosion resistance and may guide the development of future coating for long in-service life.

Download Full-text

In situ study of electron beam-induced chemical vapor deposition of Au in an environmental TEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100137653 ◽

1995 ◽

Vol 53 ◽

pp. 256-257

Author(s):

J. Drucker ◽

R. Sharma ◽

J. Kouvetakis ◽

K.H.J. Weiss

Keyword(s):

Electron Beam ◽

Chemical Vapor Deposition ◽

Vapor Deposition ◽

Quantum Effect ◽

Line Drawing ◽

Chemical Vapor ◽

Environmental Cell ◽

Engineering Changes ◽

Kinetics Of

Patterning of metals is a key element in the fabrication of integrated microelectronics. For circuit repair and engineering changes constructive lithography, writing techniques, based on electron, ion or photon beam-induced decomposition of precursor molecule and its deposition on top of a structure have gained wide acceptance Recently, scanning probe techniques have been used for line drawing and wire growth of W on a silicon substrate for quantum effect devices. The kinetics of electron beam induced W deposition from WF6 gas has been studied by adsorbing the gas on SiO2 surface and measuring the growth in a TEM for various exposure times. Our environmental cell allows us to control not only electron exposure time but also the gas pressure flow and the temperature. We have studied the growth kinetics of Au Chemical vapor deposition (CVD), in situ, at different temperatures with/without the electron beam on highly clean Si surfaces in an environmental cell fitted inside a TEM column.

Download Full-text

The relaxation of compressive biaxial strains in SOS via microtwins

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100155013 ◽

1989 ◽

Vol 47 ◽

pp. 608-609

Author(s):

M. E. Twigg ◽

E. D. Richmond ◽

J. G. Pellegrino

Keyword(s):

Thin Film ◽

Chemical Vapor Deposition ◽

Molecular Beam Epitaxy ◽

Compressive Stress ◽

Vapor Deposition ◽

Partial Dislocation ◽

Molecular Beam ◽

Volume Fraction ◽

Chemical Vapor ◽

Silicon Thin Film

For heteroepitaxial systems, such as silicon on sapphire (SOS), microtwins occur in significant numbers and are thought to contribute to strain relief in the silicon thin film. The size of this contribution can be assessed from TEM measurements, of the differential volume fraction of microtwins, dV/dν (the derivative of the microtwin volume V with respect to the film volume ν), for SOS grown by both chemical vapor deposition (CVD) and molecular beam epitaxy (MBE).In a (001) silicon thin film subjected to compressive stress along the [100] axis , this stress can be relieved by four twinning systems: a/6[211]/( lll), a/6(21l]/(l1l), a/6[21l] /( l1l), and a/6(2ll)/(1ll).3 For the a/6[211]/(1ll) system, the glide of a single a/6[2ll] twinning partial dislocation draws the two halves of the crystal, separated by the microtwin, closer together by a/3.

Download Full-text