Thermal conductivity and electromagnetic shielding effectiveness of composites based on Ag-plating carbon fiber and epoxy

2015 ◽  
Vol 132 (33) ◽  
pp. n/a-n/a ◽  
Author(s):  
Junpeng Li ◽  
Shuhua Qi ◽  
Mengyu Zhang ◽  
Zhaofu Wang
Keyword(s):  
Thermal Conductivity ◽  
Carbon Fiber ◽  
Electromagnetic Shielding ◽  
Shielding Effectiveness ◽  
Electromagnetic Shielding Effectiveness

Measurement of Electromagnetic Shielding Effectiveness of the Composite Carbon Fibers/Nickel Thin Film

2010 ◽  
Vol 437 ◽  
pp. 580-583
Author(s):  
Ho Chang ◽  
Yun Min Yeh ◽  
Ching Song Jwo ◽  
Sih Li Chen
Keyword(s):  
Carbon Fiber ◽  
Average Particle Size ◽  
Composite Films ◽  
Waterborne Polyurethane ◽  
Electromagnetic Shielding ◽  
Average Particle ◽  
Shielding Effectiveness ◽  
Conductive Composite ◽  
Blending Method ◽  
Electromagnetic Shielding Effectiveness

This paper presents the development of a conductive composite film and the measurement of electromagnetic (EM) shielding effectiveness (SE) of the prepared film. A coaxial transmission-line technique based on ASTM D4935-99 Standard was used to measure the electromagnetic shielding effectiveness. A nickel nanofluid with an average particle size of 50 nm was prepared with a self-developed nanofluid synthesis system. By using a polymer blending method, carbon fiber and carbon fiber/nickel nanoparticles were blended with waterborne polyurethane (WPU) to prepare conductive composite films of 0.25 mm thick. Experimental results have shown that the electromagnetic shielding effectiveness value of the prepared conductive composite material can reach 26 dB within the range of 50 MHz ~ 1.5GHz.

Weaving carbon fiber/recycled polypropylene selvages to reinforce the polymer‐based protective composite fabrics: Manufacturing techniques and electromagnetic shielding effectiveness

2018 ◽  
Vol 40 (S2) ◽  
pp. E1910-E1917 ◽  
Author(s):  
Ting An Lin ◽  
Yu‐Chun Chuang ◽  
Jan‐Yi Lin ◽  
Mei‐Chen Lin ◽  
Ching‐Wen Lou ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Electromagnetic Shielding ◽  
Shielding Effectiveness ◽  
Recycled Polypropylene ◽  
Manufacturing Techniques ◽  
Composite Fabrics ◽  
Electromagnetic Shielding Effectiveness

scholarly journals Electrical Conductivity and Electromagnetic Shielding Effectiveness of Bio-Composites

2020 ◽  
Vol 4 (1) ◽  
pp. 28
Author(s):  
Konstantinos Tserpes ◽  
Vasileios Tzatzadakis ◽  
Jens Bachmann
Keyword(s):  
Electrical Conductivity ◽  
Carbon Fiber ◽  
Epoxy Resin ◽  
Numerical Models ◽  
Experimental Testing ◽  
Electromagnetic Shielding ◽  
Shielding Effectiveness ◽  
Carbon Fiber Fabric ◽  
Electromagnetic Shielding Effectiveness ◽  
Fiber Fabric

In this paper, the electrical conductivity and electromagnetic shielding effectiveness of two bio-composites are studied by experimental testing and numerical models. Two monolithic composites with partly bio-based content were manufactured. The first bio-composite is made of a carbon fiber fabric prepreg and a partly bio-based (rosin) epoxy resin (CF/Rosin). The second bio-composite is a combination of prepregs of carbon fiber fabric/epoxy resin and flax fiber fabric/epoxy resin (CF-Flax/Epoxy). A single line infusion process was used prior to the curing step in the autoclave. Both variants are exemplary for the possibility of introducing bio-based materials in high performance CFRP. In-plane and out-of-plane electrical conductivity tests were conducted according to Airbus standards AITM2 0064 and AITM2 0065, respectively. Electromagnetic shielding effectiveness tests were conducted based on the standard ASTM D 4935-10. Materials were prepared at the German Aerospace Center (DLR), while characterization tests were conducted at the University of Patras. In addition to the tests, numerical models of representative volume elements were developed, using the DIGIMAT software, to predict the electrical conductivity of the two bio-composites. The preliminary numerical results show a good agreement with the experimental results.

Electromagnetic Shielding Effectiveness of Carbon Black -Carbon Fiber Cement Based Materials

2010 ◽  
Vol 168-170 ◽  
pp. 1438-1442 ◽  
Author(s):  
Shao Wen Huang ◽  
Guang Hua Chen ◽  
Qi Luo ◽  
Yu Hua Xu
Keyword(s):  
Carbon Fiber ◽  
Carbon Black ◽  
Mass Fraction ◽  
Electromagnetic Shielding ◽  
Cement Composites ◽  
Shielding Effectiveness ◽  
Frequency Range ◽  
Cement Based Materials ◽  
Electromagnetic Shielding Effectiveness ◽  
Effective Additive

The electromagnetic shielding effectiveness (SE) of cement based composites filled with carbon black and carbon fiber were discussed in this paper. Results show the SE of cement composites will get obvious improvement as the carbon black mass fraction increases beyond 6%. Carbon fiber is a much more effective additive than carbon back. The shielding effectiveness were gradually improved with the increase of content of carbon fiber, the maximum attained 21 dB at 1.5GHz. Adding carbon black and carbon fiber, SE of the cement based materials get more upward gradient, the maximum SE reached 27 dB in tested frequency range.

Preparation of CF/BR Composite Used for Electromagnetic Shielding

2008 ◽  
Vol 47-50 ◽  
pp. 980-983
Author(s):  
Yi He Zhang ◽  
Jin Bo Lu ◽  
Hai Tao Huang ◽  
Xiang Yang Hao ◽  
Helen Lai Wah Chan
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Electromagnetic Shielding ◽  
Experimental Results ◽  
Butadiene Rubber ◽  
Shielding Effectiveness ◽  
Mechanical Agitation ◽  
Electromagnetic Shielding Effectiveness

The carbon fiber (CF) reinforced butadiene rubber (BR) electromagnetic shielding composite has been prepared by mechanical agitation and roll mixing methods. The composites have been characterized and tested. As shown in the experimental results, the mechanical properties was increased with the increase of CF, and the electromagnetic shielding effectiveness (SE) of BR based composite with 15 wt% CF content has been tested, the maximum SE was about 60 dB.

Analyses on the Manufacture and Physical Properties of Electromagnetic Shielding/ Far Infrared Ray Nonwoven

2010 ◽  
Vol 97-101 ◽  
pp. 1790-1793
Author(s):  
Jia Horng Lin ◽  
Yu Tien Huang ◽  
Chin Mei Lin ◽  
Yi Chang Yang ◽  
Chien Teng Hsieh ◽  
...  
Keyword(s):  
Physical Properties ◽  
Far Infrared ◽  
Electromagnetic Shielding ◽  
Breaking Force ◽  
Shielding Effectiveness ◽  
Machine Direction ◽  
Tear Strength ◽  
Burst Strength ◽  
Far Infrared Ray ◽  
Electromagnetic Shielding Effectiveness

According to the results, when low melting polyester fiber increased to be 20%, the electromagnetic shielding/ far infrared ray nonwoven obtained the optimum burst strength, maximum breaking force and maximum tear strength, and they were as follows: burst strength was 4.2 kgf/cm2; maximum breaking force was 153.59 N in the cross machine direction and 70.80 N in the machine direction; maximum tear strength was 215.77 N in cross machine direction and 117.07 N in machine direction; and optimum electromagnetic shielding effectiveness (EMSE) was 45 dB.

Sign in / Sign up

Export Citation Format

Share Document