scholarly journals Inferential aspects for the optimal selection of the control parameters in Taguchi method

2021 ◽  
Keyword(s):  
Taguchi Method ◽  
Optimal Selection ◽  
Control Parameters ◽  
Selection Of

Methods for Restricting Maximum Exposure Rate in Computerized Adaptative Testing

Methodology ◽  
2007 ◽  
Vol 3 (1) ◽  
pp. 14-23 ◽  
Author(s):  
Juan Ramon Barrada ◽  
Julio Olea ◽  
Vicente Ponsoda
Keyword(s):  
Measurement Accuracy ◽  
Computerized Adaptive Testing ◽  
Computation Time ◽  
Adaptive Testing ◽  
Exposure Rate ◽  
Control Parameters ◽  
The Impact ◽  
Two Alternatives ◽  
Selection Of ◽  
Maximum Exposure

Abstract. The Sympson-Hetter (1985) method provides a means of controlling maximum exposure rate of items in Computerized Adaptive Testing. Through a series of simulations, control parameters are set that mark the probability of administration of an item on being selected. This method presents two main problems: it requires a long computation time for calculating the parameters and the maximum exposure rate is slightly above the fixed limit. Van der Linden (2003) presented two alternatives which appear to solve both of the problems. The impact of these methods in the measurement accuracy has not been tested yet. We show how these methods over-restrict the exposure of some highly discriminating items and, thus, the accuracy is decreased. It also shown that, when the desired maximum exposure rate is near the minimum possible value, these methods offer an empirical maximum exposure rate clearly above the goal. A new method, based on the initial estimation of the probability of administration and the probability of selection of the items with the restricted method ( Revuelta & Ponsoda, 1998 ), is presented in this paper. It can be used with the Sympson-Hetter method and with the two van der Linden's methods. This option, when used with Sympson-Hetter, speeds the convergence of the control parameters without decreasing the accuracy.

Application of L6 Orthogonal Array for Optimal Selection of Some Process Parameters in GMAW Process

2012 ◽  
Vol 45 (4) ◽  
pp. 41 ◽  
Author(s):  
M. K. Saha ◽  
Santanu Das ◽  
A. Bandyopadhyay ◽  
S. Bandyopadhyay
Keyword(s):  
Process Parameters ◽  
Orthogonal Array ◽  
Optimal Selection ◽  
Selection Of

Application of L6 Orthogonal Array for Optimal Selection of Some Process Parameters in GMAW Process

2012 ◽  
Vol 45 (4) ◽  
pp. 41
Author(s):  
M. K. Saha ◽  
Santanu Das ◽  
A. Bandyopadhyay ◽  
S. Bandyopadhyay
Keyword(s):  
Process Parameters ◽  
Orthogonal Array ◽  
Optimal Selection ◽  
Selection Of

scholarly journals Methodology for Determining the Location of River Ports on a Modernized Waterway Based on Non-Cost Criteria: A Case Study of the Odra River Waterway

2021 ◽  
Vol 13 (6) ◽  
pp. 3571
Author(s):  
Bogusz Wiśnicki ◽  
Dorota Dybkowska-Stefek ◽  
Justyna Relisko-Rybak ◽  
Łukasz Kolanda
Keyword(s):  
Large Scale ◽  
Multicriteria Decision Making ◽  
Research Process ◽  
Optimal Selection ◽  
Investment Projects ◽  
Odra River ◽  
Research Problems ◽  
Selection Of ◽  
Construction Works

The paper responds to research problems related to the implementation of large-scale investment projects in waterways in Europe. As part of design and construction works, it is necessary to indicate river ports that play a major role within the European transport network as intermodal nodes. This entails a number of challenges, the cardinal one being the optimal selection of port locations, taking into account the new transport, economic, and geopolitical situation that will be brought about by modernized waterways. The aim of the paper was to present an original methodology for determining port locations for modernized waterways based on non-cost criteria, as an extended multicriteria decision-making method (MCDM) and employing GIS (Geographic Information System)-based tools for spatial analysis. The methodology was designed to be applicable to the varying conditions of a river’s hydroengineering structures (free-flowing river, canalized river, and canals) and adjustable to the requirements posed by intermodal supply chains. The method was applied to study the Odra River Waterway, which allowed the formulation of recommendations regarding the application of the method in the case of different river sections at every stage of the research process.

scholarly journals Optimal Selection of Conductors in Three-Phase Distribution Networks Using a Discrete Version of the Vortex Search Algorithm

Computation ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 80
Author(s):  
John Fernando Martínez-Gil ◽  
Nicolas Alejandro Moyano-García ◽  
Oscar Danilo Montoya ◽  
Jorge Alexander Alarcon-Villamil
Keyword(s):  
Objective Function ◽  
Power Flow ◽  
Phase Distribution ◽  
Search Algorithm ◽  
Distribution Networks ◽  
Discrete Version ◽  
Optimal Selection ◽  
Flow Method ◽  
Three Phase ◽  
Selection Of

In this study, a new methodology is proposed to perform optimal selection of conductors in three-phase distribution networks through a discrete version of the metaheuristic method of vortex search. To represent the problem, a single-objective mathematical model with a mixed-integer nonlinear programming (MINLP) structure is used. As an objective function, minimization of the investment costs in conductors together with the technical losses of the network for a study period of one year is considered. Additionally, the model will be implemented in balanced and unbalanced test systems and with variations in the connection of their loads, i.e., Δ− and Y−connections. To evaluate the costs of the energy losses, a classical backward/forward three-phase power-flow method is implemented. Two test systems used in the specialized literature were employed, which comprise 8 and 27 nodes with radial structures in medium voltage levels. All computational implementations were developed in the MATLAB programming environment, and all results were evaluated in DigSILENT software to verify the effectiveness and the proposed three-phase unbalanced power-flow method. Comparative analyses with classical and Chu & Beasley genetic algorithms, tabu search algorithm, and exact MINLP approaches demonstrate the efficiency of the proposed optimization approach regarding the final value of the objective function.

Numerical simulation studies of Cs3Bi2I9 perovskite solar device with optimal selection of electron and hole transport layers

Optik ◽  
2021 ◽  
Vol 231 ◽  
pp. 166417 ◽  
Author(s):  
Md Tohidul Islam ◽  
Md Rafsun Jani ◽  
Kazi Md Shorowordi ◽  
Zameer Hoque ◽  
Ali Mucteba Gokcek ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Hole Transport ◽  
Optimal Selection ◽  
Simulation Studies ◽  
Hole Transport Layers ◽  
Selection Of
Sign in / Sign up

Export Citation Format

Share Document