Demonstrating a Metal‐Metal Battery System in Aprotic Electrolyte with Silver and Lithium

2019 ◽  
Vol 6 (14) ◽  
pp. 3627-3632
Author(s):  
Huimin Wang ◽  
Wenchuan Gu ◽  
Denis Y. W. Yu
Author(s):  
K. L. Merkle

The atomic structures of internal interfaces have recently received considerable attention, not only because of their importance in determining many materials properties, but also because the atomic structure of many interfaces has become accessible to direct atomic-scale observation by modem HREM instruments. In this communication, several interface structures are examined by HREM in terms of their structural periodicities along the interface.It is well known that heterophase boundaries are generally formed by two low-index planes. Often, as is the case in many fcc metal/metal and metal/metal-oxide systems, low energy boundaries form in the cube-on-cube orientation on (111). Since the lattice parameter ratio between the two materials generally is not a rational number, such boundaries are incommensurate. Therefore, even though periodic arrays of misfit dislocations have been observed by TEM techniques for numerous heterophase systems, such interfaces are quasiperiodic on an atomic scale. Interfaces with misfit dislocations are semicoherent, where atomically well-matched regions alternate with regions of misfit. When the misfit is large, misfit localization is often difficult to detect, and direct determination of the atomic structure of the interface from HREM alone, may not be possible.


Author(s):  
Michael E. Rock ◽  
Vern Kennedy ◽  
Bhaskar Deodhar ◽  
Thomas G. Stoebe

Cellophane is a composite polymer material, made up of regenerated cellulose (usually derived from wood pulp) which has been chemically transformed into "viscose", then formed into a (1 mil thickness) transparent sheet through an extrusion process. Although primarily produced for the food industry, cellophane's use as a separator material in the silver-zinc secondary battery system has proved to be another important market. We examined 14 samples from five producers of cellophane, which are being evaluated as the separator material for a silver/zinc alkaline battery system in an autonomous underwater target vehicle. Our intent was to identify structural and/or chemical differences between samples which could be related to the functional differences seen in the lifetimes of these various battery separators. The unused cellophane samples were examined by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Cellophane samples were cross sectioned (125-150 nm) using a diamond knife on a RMC MT-6000 ultramicrotome. Sections were examined in a Philips 430-T TEM at 200 kV. Analysis included morphological characterization, and EDS (for chemical composition). EDS was performed using an EDAX windowless detector.


1966 ◽  
Author(s):  
S. CHODOSH ◽  
E. KATSOULIS ◽  
M. ROSANSKY

2020 ◽  
Author(s):  
Shubham Deolka ◽  
Orestes Rivada Wheelaghan ◽  
Sandra Aristizábal ◽  
Robert Fayzullin ◽  
Shrinwantu Pal ◽  
...  

We report selective formation of heterobimetallic PtII/CuI complexes that demonstrate how facile bond activation processes can be achieved by altering reactivity of common organoplatinum compounds through their interaction with another metal center. The interaction of the Cu center with Pt center and with a Pt-bound alkyl group increases the stability of PtMe2 towards undesired rollover cyclometalation. The presence of the CuI center also enables facile transmetalation from electron-deficient tetraarylborate [B(ArF)4]- anion and mild C-H bond cleavage of a terminal alkyne, which was not observed in the absence of an electrophilic Cu center. The DFT study indicates that the role of Cu center acts as a binding site for alkyne substrate, while activating its terminal C-H bond.


2020 ◽  
Author(s):  
Thomas Herzog ◽  
Naomi Weitzel ◽  
Sebastian Polarz

<div><div><div><p>One of the fascinating properties of metal-semiconductor Schottky-barriers, which has been observed for some material combinations, is memristive behavior. Memristors are smart, since they can reversibly switch between a low resistance state and a high resistance state. The devices offer a great potential for advanced computing and data storage, including neuromorphic networks and resistive random-access memory. However, as for many other cases, the presence of a real interface (metal - metal oxide) has numerous disadvantages. The realization of interface-free, respectively Schottky-barrier free memristors is highly desirable. The aim of the current paper is the generation of nanowire arrays with each nanorod possessing the same crystal phase (Rutile) and segments only differing in composition. The electric conductivity is realized by segments made of highly-doped antimony tin oxide (ATO) transitioning into pure tin oxide (TO). Complex nanoarchitectures are presented, which include ATO-TO, ATO-TO-ATO nanowires either with a stepwise distribution of antimony or as a graded functional material. The electrical characterization of the materials reveals that the introduction of memristive properties in such structures is possible. The special features observed in voltage-current (IV) curves are correlated to the behavior of mobile oxygen vacancies (VO..) at different values of applied electrical potential.</p></div></div></div>


2019 ◽  
Vol 12 (4) ◽  
pp. 30
Author(s):  
POTDAR AMARDEEP ◽  
GHUTKE PRATIK ◽  
POTDAR DISHA ◽  
TEKALE ANIL ◽  
◽  
...  

Sign in / Sign up

Export Citation Format

Share Document