Improved external device for a mass-carrying sliding system for shaking table testing

2011 ◽  
Vol 40 (4) ◽  
pp. 393-411 ◽  
Author(s):  
Julian Carrillo ◽  
Sergio Alcocer
Keyword(s):  
Shaking Table ◽  
External Device ◽  
Shaking Table Testing

Failure mechanism of steel arch trusses: Shaking table testing and FEM analysis

2015 ◽  
Vol 82 ◽  
pp. 186-198 ◽  
Author(s):  
Qing-Hua Han ◽  
Ying Xu ◽  
Yan Lu ◽  
Jie Xu ◽  
Qiu-Hong Zhao
Keyword(s):  
Failure Mechanism ◽  
Fem Analysis ◽  
Shaking Table ◽  
Shaking Table Testing

scholarly journals Performance of the CGS six DOF Shaking Table on the Harmonic Signal Reproduction

2017 ◽  
Vol 62 (1) ◽  
pp. 102-111
Author(s):  
Abdelhalim Airouche ◽  
Hassan Aknouche ◽  
Hakim Bechtoula ◽  
Nourredine Mezouer ◽  
Abderrahmane Kibboua
Keyword(s):  
Adaptive Control ◽  
Earthquake Engineering ◽  
Harmonic Signal ◽  
Shaking Table ◽  
Experimental Procedure ◽  
Signal Tracking ◽  
Engineering Research ◽  
Control Techniques ◽  
Shaking Table Testing ◽  
Six Dof

Shaking table testing continues to play an important role in earthquake engineering research. It has been recognized as a powerful testing method to evaluate structural components and systems under realistic dynamic loads. Although it represents a very attractive experimental procedure, many technical challenges, which require attention and consideration, still remain. High fidelity in signal reproduction is the focus of the work presented in this paper. The main objective of this paper is to investigate the capabilities of adaptive control techniques based on Amplitude Phase Control (APC) and Adaptive Harmonic Cancellation (AHC) on the harmonic signal tracking performance of the shaking table. A series of 232 sinusoidal command waveforms with various frequencies and amplitudes were conducted on the shaking table of the laboratory of the National Earthquake Engineering Applied Research Center (CGS, Algeria). Experimental results are reported and recommendations on the use of these adaptive control techniques are discussed.

scholarly journals Analysis of the Effects of Soil on the Seismic Energy Responses of an Equipment-Structure System via Substructure Shaking Table Testing

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Lanfang Luo ◽  
Nan Jiang ◽  
Jihong Bi
Keyword(s):  
Seismic Design ◽  
Seismic Energy ◽  
Shaking Table ◽  
Input Energy ◽  
Test Results ◽  
Element Analysis ◽  
Testing Method ◽  
Shaking Table Testing ◽  
Soil Effects ◽  
Substructure Approach

This study investigated the real-time substructure shaking table testing (RTSSTT) of an equipment-structure-soil (ESS) system and the effects of soil on the seismic energy responses of the equipment-structure (ES) subsystem. First, the branch modal substructure approach was employed to derive the formulas needed for the RTSSTT of the ESS system. Then, individual equations for calculating the energy responses of the equipment and the structure were provided. The ES subsystem was adopted as the experimental substructure, whereas the reduced soil model was treated as the numerical substructure when the RTSSTT was performed on the ESS system. The effectiveness of the proposed testing method was demonstrated by comparing the test results with those of the integrated finite element analysis. The energy responses of the ES subsystem in the case of rigid ground (i.e., the ES system) were compared with those considering the effects of soil (i.e., the ESS system). The input energy responses of the ES subsystem were found to decrease significantly after taking the effects of soil into account. Differences due to the soil effects should be considered in the seismic design for the ES system.

Displacement-Based Seismic Assessment of Low-Height Confined Masonry Buildings

2009 ◽  
Vol 25 (2) ◽  
pp. 439-464 ◽  
Author(s):  
Amador Terán-Gilmore ◽  
Oscar Zuñiga-Cuevas ◽  
Jorge Ruiz-García
Keyword(s):  
Pushover Analysis ◽  
Relative Strength ◽  
Seismic Assessment ◽  
Shaking Table ◽  
Evaluation Procedure ◽  
Masonry Buildings ◽  
Confined Masonry ◽  
Shaking Table Testing ◽  
Displacement Based ◽  
Global And Local

This paper presents a practical displacement-based evaluation procedure for the seismic assessment of low-height regular confined masonry buildings. First, the so-called Coefficient Method established in several FEMA documents is adapted to obtain rapid estimates of inelastic roof displacement demands for regular confined masonry buildings. For that purpose, a statistical study of constant relative strength inelastic displacement ratios of single-degree-of-freedom systems representing confined masonry buildings is carried out. Second, a nonlinear simplified model is introduced to perform pushover analysis of regular confined masonry buildings whose global and local behavior is dominated by shear deformations in the masonry walls. The model, which can be applied through the use of commercial software, can be used to establish the capacity curve of such buildings. Finally, the evaluation procedure is applied to a three-story building tested at a shaking table testing facility.

scholarly journals Seismic energy response analysis of equipment-structure system via real-time dynamic substructuring shaking table testing

2019 ◽  
Vol 23 (1) ◽  
pp. 37-50 ◽  
Author(s):  
Jihong Bi ◽  
Lanfang Luo ◽  
Nan Jiang
Keyword(s):  
Real Time ◽  
Shaking Table Test ◽  
Seismic Energy ◽  
Shaking Table ◽  
Energy Calculation ◽  
Test Results ◽  
Structure System ◽  
Time Dynamic ◽  
Dynamic Substructuring ◽  
Shaking Table Testing

Dynamic equations are presented that have been deduced for a real-time dynamic substructuring shaking table test of an equipment-structure system, based on the branch mode substructure method. The equipment is adopted as the experimental substructure, which is loaded by the shaking table, while the structure is adopted as the numerical substructure. Real-time data communication occurs between the two substructures during the test. A real-time seismic energy calculation method was proposed for the calculation of energy responses, both in the experimental substructure and the numerical substructure. Taking a representative four-story steel frame/equipment model, real-time dynamic substructuring shaking table tests and overall model tests were executed. The proposed real-time dynamic substructuring shaking table testing method was verified by comparing the test results with shaking table test results for the overall model. The energy responses of each component in the equipment-structure system, using different connection types, also were studied. Changes in the connection types can lead to changes in the energy responses of the equipment-structure system, especially with respect to the equipment. The choice of the connection for the equipment-structure coupled system should take into account the operational performance objective of the equipment.

Shaking table testing of granite cladding with undercut bolt anchorage

2018 ◽  
Vol 171 ◽  
pp. 488-499 ◽  
Author(s):  
Baofeng Huang ◽  
Wensheng Lu ◽  
Khalid M. Mosalam
Keyword(s):  
Shaking Table ◽  
Shaking Table Testing
Sign in / Sign up

Export Citation Format

Share Document