scholarly journals Propagation of hydraulic fracture under the joint impact of bedding planes and natural fractures in shale reservoirs

2019 ◽  
Vol 7 (6) ◽  
pp. 2690-2702 ◽  
Author(s):  
Tao Gong ◽  
Binwei Xia ◽  
Lang Liu ◽  
Ziye Peng ◽  
Yugang Gao
Keyword(s):  
Hydraulic Fracture ◽  
Natural Fractures ◽  
Bedding Planes ◽  
Shale Reservoirs

Hydraulic-Fracture Geomechanics and Microseismic-Source Mechanisms

SPE Journal ◽  
2013 ◽  
Vol 18 (04) ◽  
pp. 766-780 ◽  
Author(s):  
N.R.. R. Warpinski ◽  
M.J.. J. Mayerhofer ◽  
K.. Agarwal ◽  
J.. Du
Keyword(s):  
Shear Stress ◽  
Hydraulic Fracture ◽  
Hydraulic Fractures ◽  
Natural Fractures ◽  
Total Stress ◽  
Multiple Fractures ◽  
Significant Information ◽  
Bedding Planes ◽  
Fracturing Process ◽  
Source Mechanisms

Summary Interpretation of microseismic results and attempts to link microseismic-source mechanisms to fracture behavior require an understanding of the geomechanics of the fracturing process. Stress calculations around fractures show that the area normal to the fracture surface is stabilized by a pressurized fracture as a result of increased total stress and decreased shear stress. In this area, microseisms can occur only if leakoff pressurizes natural fractures, bedding planes, or other weakness features, and source mechanisms are thus likely to show a volumetric component that has either opening or closing movement in addition to shear slippage. Conversely, the tip tensile region is destabilized by a reduction in total stress and an increase in shear stress, with the likelihood that microseisms would be generated in this region because of these changes. Such microseisms would not yet be invaded by the fracturing fluid, and events that are mostly shear would be expected. Systems with multiple fractures, such as those that are potentially created in multiperforation-cluster stages, are much more complex, but similar elements can be outlined for those as well. Source mechanisms can help delineate these different types of microseismic behaviors, but the evaluation of such mechanisms reveals that they provide no significant information about the hydraulic fracture. Whereas it would be valuable if source mechanisms could provide information about the mechanics of the hydraulic fracture (e.g., opening, closing, and proppant), calculations show that both the energy and volume associated with microseismicity are an insignificant fraction of the total energy and volume input into the stimulation. Thus, hydraulic fractures are almost entirely aseismic. The analysis of source mechanisms should concentrate on what those data reveal about the reservoir (e.g., natural fractures and faults). Integrated diagnostic studies provide more value in understanding both the microseismicity and interpretation of the microseismic results.

scholarly journals Experimental Investigation of Fracture Propagation Behavior Induced by Hydraulic Fracturing in Anisotropic Shale Cores

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 976 ◽  
Author(s):  
Zhaohui Chong ◽  
Qiangling Yao ◽  
Xuehua Li
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Bedding Plane ◽  
Operating Conditions ◽  
Breakdown Pressure ◽  
Bedding Planes ◽  
Propagation Pattern ◽  
Circumferential Displacement ◽  
Shale Reservoirs ◽  
Plane Mode

Hydraulic fracturing is a key technology for the development of unconventional resources such as shale gas. Due to the existence of numerous bedding planes, shale reservoirs can be considered typical anisotropic materials. In anisotropic shale reservoirs, the complex hydraulic fracture network (HFN) formed by the interaction of hydraulic fracture (HF) and bedding plane (BP) is the key to fracturing treatment. In this paper, considering the anisotropic angle, stress state and injection rate, a series of hydraulic fracturing experiments were conducted to investigate the effect of anisotropic characteristics of shale reservoirs on HFN formation. The results showed that the breakdown pressure increased first and then decreased when the anisotropic angle changed at 0°–90°, while the circumferential displacement had the opposite trend with a small difference. When θ = 0°, fracturing efficiency of shale specimens was much higher than that under other operating conditions. When θ ≤ 15°, the bedding-plane mode is ubiquitous in all shale reservoirs. While θ ranged from 30°–45°, a comprehensive propagation pattern of bedding-plane and crossing is presented. When θ ≥ 60°, the HFN pattern changes from comprehensive mode to crossing mode. The propagation pattern obtained from physical experiments were verified by theoretical analysis. The closure proportion of the circumferential displacement was the highest when the propagation pattern was the bedding-plane mode (θ ≤ 15°), following by crossing. The closure proportion was minimum only when the bedding-plane and crossing mode were simultaneously presented in the HFN. The results can provide some basic data for the design in hydraulic fracturing of tight oil/gas reservoirs.

scholarly journals Discrete Element Analysis for Hydraulic Fracture Propagations in Laminated Reservoirs with Complex Initial Joint Properties

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-23 ◽  
Author(s):  
Fakai Dou ◽  
J. G. Wang ◽  
Huimin Wang ◽  
Bowen Hu ◽  
Chengxuan Li
Keyword(s):  
Mechanical Properties ◽  
Hydraulic Fracture ◽  
Fracture Morphology ◽  
Fracture Network ◽  
In Situ Stress ◽  
Element Analysis ◽  
Approach Angle ◽  
Bedding Planes ◽  
Fracturing Fluids ◽  
Shale Reservoirs

Previous studies on hydraulic fracturing mainly focus on the effects of the in-situ stress state, permeability, fracturing fluids, and approach angle in homogeneous rocks, but the impacts of joint mechanical properties in laminated shale reservoirs on the propagation and formation of the fracture network are still unclear. In this study, a coupled fluid-mechanical model was developed to investigate the impacts of joint mechanical properties on hydraulic fracture propagation. Then, this model was validated with Blanton’s criterion and some experimental observations on fracture morphology. Finally, a series of numerical simulations were conducted to comparatively analyze the impacts of joint mechanical properties on the total crack number, the percentage and distribution of each fracture type, the process of crack propagation, and the final fracture morphology. Numerical results show that the cracking behaviors induced by joint mechanical properties vary with the approach angle. Joint strength has a significant influence on the generation of matrix tensile cracks. The tensile-to-shear strength ratio plays an even more important role in the shear slips of bedding planes and is conducive to the formation of complex fracture morphology.

scholarly journals A numerical investigation on the performance of hydraulic fracturing in naturally fractured gas reservoirs based on stimulated rock volume

2020 ◽  
Vol 10 (8) ◽  
pp. 3333-3345
Author(s):  
Ali Al-Rubaie ◽  
Hisham Khaled Ben Mahmud
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Natural Fracture ◽  
Shear Stresses ◽  
Individual Element ◽  
Natural Fractures ◽  
Gas Reservoirs ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Naturally Fractured

Abstract All reservoirs are fractured to some degree. Depending on the density, dimension, orientation and the cementation of natural fractures and the location where the hydraulic fracturing is done, preexisting natural fractures can impact hydraulic fracture propagation and the associated flow capacity. Understanding the interactions between hydraulic fracture and natural fractures is crucial in estimating fracture complexity, stimulated reservoir volume, drained reservoir volume and completion efficiency. However, because of the presence of natural fractures with diffuse penetration and different orientations, the operation is complicated in naturally fractured gas reservoirs. For this purpose, two numerical methods are proposed for simulating the hydraulic fracture in a naturally fractured gas reservoir. However, what hydraulic fracture looks like in the subsurface, especially in unconventional reservoirs, remain elusive, and many times, field observations contradict our common beliefs. In this study, the hydraulic fracture model is considered in terms of the state of tensions, on the interaction between the hydraulic fracture and the natural fracture (45°), and the effect of length and height of hydraulic fracture developed and how to distribute induced stress around the well. In order to determine the direction in which the hydraulic fracture is formed strikethrough, the finite difference method and the individual element for numerical solution are used and simulated. The results indicate that the optimum hydraulic fracture time was when the hydraulic fracture is able to connect natural fractures with large streams and connected to the well, and there is a fundamental difference between the tensile and shear opening. The analysis indicates that the growing hydraulic fracture, the tensile and shear stresses applied to the natural fracture.

scholarly journals Numerical modeling of complex hydraulic fracture networks based on the discontinuous deformation analysis (DDA) method

2021 ◽  
pp. 014459872098153
Author(s):  
Yanzhi Hu ◽  
Xiao Li ◽  
Zhaobin Zhang ◽  
Jianming He ◽  
Guanfang Li
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fracture Network ◽  
Discontinuous Deformation Analysis ◽  
Deformation Analysis ◽  
Fracture Networks ◽  
Proposed Model ◽  
Discontinuous Deformation ◽  
Shale Reservoirs ◽  
Dda Method

Hydraulic fracturing is one of the most important technologies for shale gas production. Complex hydraulic fracture networks can be stimulated in shale reservoirs due to the existence of numerous natural fractures. The prediction of the complex fracture network remains a difficult and challenging problem. This paper presents a fully coupled hydromechanical model for complex hydraulic fracture network propagation based on the discontinuous deformation analysis (DDA) method. In the proposed model, the fracture propagation and rock mass deformation are simulated under the framework of DDA, and the fluid flow within fractures is simulated using lubrication theory. In particular, the natural fracture network is considered by using the discrete fracture network (DFN) model. The proposed model is widely verified against several analytical and experimental results. All the numerical results show good agreement. Then, this model is applied to field-scale modeling of hydraulic fracturing in naturally fractured shale reservoirs. The simulation results show that the proposed model can capture the evolution process of complex hydraulic fracture networks. This work offers a feasible numerical tool for investigating hydraulic fracturing processes, which may be useful for optimizing the fracturing design of shale gas reservoirs.

scholarly journals Numerical and Experimental Investigations of the Interactions between Hydraulic and Natural Fractures in Shale Formations

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2541 ◽  
Author(s):  
Xin Chang ◽  
Yintong Guo ◽  
Jun Zhou ◽  
Xuehang Song ◽  
Chunhe Yang
Keyword(s):  
Hydraulic Fracture ◽  
Interaction Mechanism ◽  
Stress Transfer ◽  
Displacement Discontinuity ◽  
Tensile Fracture ◽  
Experimental Investigations ◽  
Shear Stresses ◽  
Natural Fractures ◽  
Stick Slip ◽  
Joint Element

Natural fractures (NFs) have been recognized as the dominant factors that increase hydraulic fracture complexity and reservoir productivity. However, the interactions between hydraulic and natural fractures are far from being fully understood. In this study, a two-dimensional numerical model based on the displacement discontinuity method (DDM) has been developed and used to investigate the interaction between hydraulic and pre-existing natural fractures. The inelastic deformation, e.g., stick, slip and separation, of the geologic discontinuities is captured by a special friction joint element called Mohr-Coulomb joint element. The dynamic stress transfer mechanisms between the two fracture systems and the possible location of secondary tensile fracture that reinitiates along the opposite sides of the NF are discussed. Furthermore, the model results are validated by a series of large tri-axial hydraulic fracture (HF) tests. Both experimental and numerical results showed that the displacements and stresses along the NFs are all in highly dynamic changes. When the HF is approaching the NF, the HF tip can exert remote compressional and shear stresses on the NF interface, which results in the debonding of the NF. The location and value of the evoked stress is a function of the far-field horizontal differential stress, inclination angle of the NF, and the net pressure used in fracturing. For a small approaching angle, the stress peak is located farther away from the intersection point, so an offset fracture is more likely to be generated. The cemented strength of the NF also has an important influence on the interaction mechanism. Weakly bonded NF surfaces increase the occurrence of a shear slippage, but for a moderate strength NF, the hybrid failure model with both tensile and shear failures, and conversion may appear.

Sign in / Sign up

Export Citation Format

Share Document