scholarly journals Study on the shear movement law of overlying strata by slice mining

2020 ◽  
Vol 8 (7) ◽  
pp. 2335-2351
Author(s):  
Junhui Fu ◽  
Guangcai Wen ◽  
Haitao Sun ◽  
Xuelin Yang
2021 ◽  
Vol 198 ◽  
pp. 108207
Author(s):  
Jianhua He ◽  
Andrew D. La Croix ◽  
Sebastian Gonzalez ◽  
Julie Pearce ◽  
Wenlong Ding ◽  
...  

2012 ◽  
Vol 594-597 ◽  
pp. 1338-1342
Author(s):  
Qing Hai Li ◽  
Ren Shu Yang ◽  
Wei Ping Shi

In first mine of Chagannaoer, 2# coal seam, the mainly mined out layer, was 22.00m thickness in average. In order to meet the requirements of production ability, the mine was planned to apply mining technology of fully mechanized caving. Good or bad of top coal’s caving was an important prerequisite which decided the mining technology of top coal caving could be chosen or not. Due to lack of producing mines in this region and no experience to refer, we simulated the mining process of 2# coal seam using numerical software of FLAC3D, and gained evolution laws of stress and displacement of top coal and overlying strata and expansion laws of plastic zone. Through analysis, we got that the top coal damaged seriously and the top coal could be caved smoothly. Relying on the geological conditions of site, we verified the simulated results with method of fuzzy comprehensive evaluation. Combined with the research results, we decided that 2# coal seam’s caving was better and was convenient for top coal caving, so it was suitable for caving mining in 2# coal seam in first mine of Chagannaoer.


1886 ◽  
Vol 3 (9) ◽  
pp. 406-408
Author(s):  
S. A. Adamson

Only a short time since there was discovered in the Lower Coalmeasures at Idle, a magnificent specimen of Megalichthys Hibberti; and now, at Clayton, near Bradford, has been found one of the grandest examples yet seen of a fossil Sigillaria tree. It was in the Fall Top Quarry, at Clayton, worked by Messrs. Murgatroyd and Sons, that this remarkable fossil was discovered, and these gentlemen deserve the highest praise from all geologists for the skill and extreme care with which they have bared the fossil, and also for their kindness in allowing it to be inspected. This quarry is not far from the edge of a bold escarpment overlooking the Thornton Valley, and the well-known Elland Flagstone is worked here for landings, flags, etc. Between the Better-Bed-Coal and the Flagstone there is a great thickness of sandstones, shales, etc., of various characters, and it was in these measures that the fossil tree was discovered about 12 feet below the surface. The sandstones just referred to are of little commercial value, many being irregularly bedded, and others very perishable in their nature; the better kinds are used for rough walling, the remainder being merely rubbish to fill up other excavations. The marketable flagstone is at a considerable depth in this quarry, and blasting operations have to be carried on to remove rapidly the overlying strata. After one of these explosions, Messrs. Murgatroyd observed part of a large fossil tree exposed, and, profiting by their knowledge of geology (which, by the work of the Yorkshire Geological Society and also of the Leeds Geological Association, is rapidly spreading throughout the entire county), they immediately suspended further operations, and, instead, gave orders to their workmen to carefully bare the remainder of the roots.


Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 4) ◽  
Author(s):  
Yun Zhang ◽  
Yongzi Liu ◽  
Xingping Lai ◽  
Jianming Gao

Abstract Short-wall block backfill mining (SBBM) technology is an effective method to solve the environmental problems in the mining process. Based on the technical characteristics of SBBM technology and the physical similarity criterion, the physical similarity models for comparing the control effects of water-flowing fracture (WFF) development using short-wall block cave mining (SBCM) and SBBM were established, and the deformation and the WFF development of overlying strata above gob were monitored. The test results determined that the composite materials of 5 mm thick pearl sponge+5 mm thick sponge+10 mm thick paper+6 mm thick board were adopted as the similar backfill materials by comparing the stress-strain curves between the similar backfill materials and the original gangue sample. When the backfilling body was filled into the gob, it would be the permanent bearing body, which bore the load of the overlying strata accompanied with the protective coal pillar. At the same time, the backfilling body also filled the collapse space of overlying strata, which was equivalent to reduce the mining height, and effectively reduced the subsidence and failure height of the overlying strata. Compared with SBCM, the test results showed that the maximum vertical deformation, the height of water-flowing fractured zone, and activity range of overlying strata using SBBM were reduced by 91.4%, 82.5%, and 64.9%, respectively. SBBM had a significant control effect on strata damage and WFF development, which could realize the purpose of water resource protection in coal mines.


2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Zhengkai Yang ◽  
Zhiheng Cheng ◽  
Zhenhua Li ◽  
Chunyuan Li ◽  
Lei Wang ◽  
...  

The aim of this study is to obtain movement laws of overlying strata above a fully mechanized coal mining face backfilled with gangue and solve the problem of surface subsidence during coal mining. This study was carried out based on gangue backfilling mining of Jiulishan Coal Mine (Jiaozuo City, Henan Province, China) from the perspectives of deformation of backfilled gangue under compaction, surrounding rock of a stope, and activities of key strata. The method combining with rock mechanics, viscoelastic mechanics, control theory of rock mass under mining, and numerical simulation was used based on physical and mechanical characteristics of backfilled gangue. On this basis, the research analyzed the temporal-spatial relationships of activities of surrounding rock of the stope, compressive deformation of backfilling body, failure depth of the floor, deformation characteristics of the main roof with laws of surface subsidence. The movement characteristics of overlying strata above the fully mechanized coal mining face backfilled with gangue and the traditional fully mechanized mining face were compared. It is found that, under the same conditions of overlying strata, movement laws of overlying strata are mainly determined by the mining height of coal seams and the heights of a caving zone and a fracture zone are nearly linearly correlated with the mining height. Through analysis based on thin-plate theory and key stratum theory, the location of the main roof of the fully mechanized coal mining face backfilled with gangue in coal seams first bending and sinking due to load of overlying strata was ascertained. Then, it was determined that there are two key strata and the main roof belongs to the inferior key stratum. By using the established mechanical model for the main roof of the fully mechanized coal mining face backfilled with gangue and the calculation formula for the maximum deflection of the main roof, this research presented the conditions for breaking of the main roof. In addition, based on the theoretical analysis, it is concluded that the main roof of the fully mechanized coal mining face backfilled with gangue does not break, but bends. The numerical simulation results demonstrate that, with the continuous increase of strength of backfilled gangue, the stress concentration degree of surrounding rock reduces constantly, so does its decrease amplitude. Moreover, the compressive deformation of backfilling, failure depth of the floor, and bending and subsidence of the main roof continuously decrease and tend to be stable. The mechanical properties of backfilling materials determine effects of gangue backfilling in controlling surface subsidence. Gangue backfilling can effectively control movement of overlying strata and surface subsidence tends to be stable with the increase of elastic modulus of gangue.


1991 ◽  
Vol 14 (1) ◽  
pp. 387-393 ◽  
Author(s):  
C. R. Garland

AbstractThe Amethyst gas field was discovered in 1970 by well 47/13-1. Subsequently it was appraised and delineated by 17 wells. It consists of at least five accumulations with modest vertical relief, the reservoir being thin aeolian and fluviatile sandstones of the Lower Leman Sandstone Formation. Reservoir quality varies from poor to good, high production rates being attained from the aeolian sandstones. Seismic interpretation has involved, in addition to conventional methods, the mapping of several seismic parameters, and a geological model for the velocity distribution in overlying strata.Gas in place is currently estimated at 1100 BCF, with recoverable reserves of 844 BCF. The phased development plan envisages 20 development wells drilled from four platforms, and first gas from the 'A' platforms was delivered in October 1990. A unitization agreement is in force between the nine partners, with a technical redetermination of equity scheduled to commence in 1991.


Sign in / Sign up

Export Citation Format

Share Document