scholarly journals Element‐Specific Magnetization Damping in Ferrimagnetic DyCo 5 Alloys Revealed by Ultrafast X‐ray Measurements

2021 ◽  
Vol 15 (8) ◽  
pp. 2170029
Author(s):  
Radu Abrudan ◽  
Martin Hennecke ◽  
Florin Radu ◽  
Torsten Kachel ◽  
Karsten Holldack ◽  
...  
Keyword(s):  
2019 ◽  
Vol 70 (8) ◽  
pp. 2968-2972
Author(s):  
Elena Ionela Neacsu ◽  
Virgil Constantin ◽  
Cristina Donath ◽  
Kazimir Yanushkevich ◽  
Aliona Zhivulka ◽  
...  

The corrosion behaviour of special alloys (Uranus B6 steel and Monel 400) exposed to chlorine chloride-deep eutectic solvents (DES) at 353 K has been investigated by polarization curves method. The corresponding corrosion parameters in choline chloride-oxalic acid and choline chloride-malonic acid were calculated. Micrographic images before and after immersion in the corrosive medium were obtained. Measurements of the influence of the corrosion process on the crystal structure and specific magnetization of the studied steels was carried out by using X-ray diffraction and respectivelly ponderomotive methods.


Author(s):  
Radu Abrudan ◽  
Martin Hennecke ◽  
Florin Radu ◽  
Torsten Kachel ◽  
Karsten Holldack ◽  
...  
Keyword(s):  

1996 ◽  
Vol 77 (18) ◽  
pp. 3925-3928 ◽  
Author(s):  
J. F. MacKay ◽  
C. Teichert ◽  
D. E. Savage ◽  
M. G. Lagally

2019 ◽  
Vol 946 ◽  
pp. 235-241 ◽  
Author(s):  
D.I. Tishkevich ◽  
A.I. Vorobjova ◽  
D.A. Vinnik

Through-pores alumina membranes of 50 μm thickness and 70 × 70 mm size have been fabricated to deposit Ni nanowires by electrochemical processing. Due to highly ordered microstructure of the membranes, the pores were filled by nanowires almost to 100%. The membrane nanowires composite morphology; structure and chemical features have been studied by scanning electron microscopy, atomic-force microscopy and X-ray structural analysis. To measure the specific magnetization σ as a function of temperature in the range of 77–1400 K, the pondero-motive method was used.


2018 ◽  
Vol 69 (10) ◽  
pp. 2642-2647 ◽  
Author(s):  
Elena Ionela Neacsu ◽  
Virgil Constantin ◽  
Cristina Donath ◽  
Kazimir Yanushkevich ◽  
Aliona Zhivulka ◽  
...  

The corrosion behaviour of special steels (OL44, OL52, SS1.4571) exposed to choline chloride (ChCl) based ionic liquids, has been investigated by polarization curves method at 80�C. Micrographic images before and after corrosion were obtained. The corresponding corrosion parameters in ChCl-Oxalic acid and ChCl-Malonic acid were calculated. The crystal structure was studied before and after the corrosion process by using X-ray diffraction method. The specific magnetization was investigated by ponderomotive method.


1999 ◽  
Vol 121 (27) ◽  
pp. 6414-6420 ◽  
Author(s):  
M.-A. Arrio ◽  
A. Scuiller ◽  
Ph. Sainctavit ◽  
Ch. Cartier dit Moulin ◽  
T. Mallah ◽  
...  

Author(s):  
Elena G. Petrova ◽  
Yana A. Shavshukova ◽  
Dzmitry A. Kotsikau ◽  
Kazimir I. Yanushkevich ◽  
Konstantin V. Laznev ◽  
...  

Thermal treatment of ferrite magnetic nanoparticles in NaCl matrix gives an opportunity to increase their specific magnetization with preservation of nanoscale size. Composite materials based on mixed ferrites Co0.65Zn0.35Fe2O4 and Mg 0.5Zn0.5Fe2O4 were synthesized by spray-drying of aqueous suspensions in presence of NaCl and annealed at 300 –900 °C. The microstructure and phase composition of nanoparticles before and after annealing were studied by scanning and transmission electron microscopy (SEM and TEM), X-ray diffraction analysis and IR spectroscopy. The magnetic properties of nanoparticles were estimated using a ponderomotive method of measuring the specific magneti zation at room temperature in a magnetic field with an induction of 0.86 T. The increase of the annealing temperature up to 900 °C was established to lead to the increase in the specific magnetization of ferrites – from 32.79 to 91.3 emu/g (Co0.65Zn0.35Fe2O4) and from 2.76 to 22.31 emu/g (Mg 0.5 Zn 0.5Fe2O4) due to recrystallization processes and increase of crystallinity degree of the ferrites. Due to the NaCl insulating layer, the particle size increases just slightly (from ~ 10 nm before annealing to ~ 60 nm after annealing at 900 °C). This method is effective for substantial increase in specific magnetization of ferrite nanoparticles with preservation of their nanoscale size.


2018 ◽  
Vol 185 ◽  
pp. 05009
Author(s):  
Maksim Anikin ◽  
Evgeniy Tarasov ◽  
Nikolay Kudrevatykh ◽  
Aleksander Zinin

In this paper the results of specific magnetization and magnetocaloric effect (MCE) measurements for Gd(Co1-xFex)2 system upon the Co substitution by Fe for the x = 0 ÷ 0.60 range are presented. Phase composition was controlled by X-ray diffraction analysis. MCE has been studied within the temperature range of 300-850 K in magnetic fields up to 17 kOe by the magnetic entropy change calculation (ΔSm). It was found that in contrast to the previously studied R(Co-Fe)2 compounds where R = Dy, Ho, Er, an ordinary symmetrical peak of ΔSm(T) in the vicinity of TC is observed for presented samples. Additionally, the MCE comparison of Gd(Co0.88Fe0.12)2 with that for the isostructural Gd(Ni0.88Fe0.12)2 compound having a plateau-like ΔSm temperature dependence is given. The obtained results are discussed.


2020 ◽  
Vol 76 (6) ◽  
pp. 517-521
Author(s):  
Sang Yun Hwang ◽  
Changyong Song ◽  
Byeong-Gwan Cho ◽  
Tae-Yeong Koo ◽  
Sungdae Ji ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document