Determination by Chromatographic Methods of the Adsorption Rate Constant of HSA on Immobilized Polyclonal and Monoclonal Antibodies

1995 ◽  
Vol 174 (1) ◽  
pp. 61-67 ◽  
Author(s):  
James Renard ◽  
Claire Vidal-Madjar ◽  
Claude Lapresle
2010 ◽  
Vol 2 (2) ◽  
pp. 107-112
Author(s):  
Nuryono Nuryono ◽  
Narsito Narsito

In this research, treatment of diatomaceous earth, Sangiran, Central Java using hydrogen chloride (HCl) and sulfuric acid (H2SO4) on kinetics of Cd(II) adsorption in aqueous solution has been carried out. The work was conducted by mixing an amount of grounded diatomaceous earth (200 mesh in size) with HCl or H2SO4 solution in various concentrations for two hours at temperature range of 100 - 150oC. The mixture was then filtered and washed with water until the filtrate pH is approximately 7 and then the residue was dried for four hours at a temperature of 70oC. The product was used as an adsorbent to adsorb Cd(II) in aqueous solution with various concentrations. The Cd(II) adsorbed was determined by analyzing the rest of Cd(II) in the solution using atomic absorption spectrophotometry. The effect of treatment was evaluated from kinetic parameter of adsorption rate constant calculated based on the simple kinetic model. Results showed  that before equilibrium condition reached, adsorpstion of Cd(II) occurred through two steps, i.e. a step tends to follow a reaction of irreversible first order  (step I) followed by reaction of reversible first order (step II). Treatment with acids, either hydrogen chloride or sulfuric acid, decreased adsorption rate constant for the step I from 15.2/min to a range of 6.4 - 9.4/min.  However, increasing concentration of acid (in a range of concentration investigated) did not give significant and constant change of adsorption rate constant. For step II process,  adsorption involved physical interaction with the sufficient low adsorption energy (in a range of 311.3 - 1001 J/mol).     Keywords: adsorption, cdmium, diatomaceous earth, kinetics.


2021 ◽  
Vol 316 ◽  
pp. 170-174
Author(s):  
Elena G. Filatova ◽  
Yury N. Pozhidaev

Adsorption isotherms of Ni (II) and Cu (II) ions by alumino-silicates, modified with N, N'-bis (3-triethoxysilylpropyl) thiocarbamide (BTM-3), and HCl, were obtained. The adsorption kinetics of heavy metal ions is studied, using the kinetic pseudo-first and pseudo-second order models. It is shown that, when alumino-silicates are modified, the rate and energy of adsorption increase. It is established that the kinetics of the adsorption of the studied ions is best described by a pseudo-second order model. The maximum value of the adsorption rate constant of 33.7∙10-5 g/ (mmol min) corresponds to nickel (II) ions for alumino-silicates, modified with HCl. The maximum value of the adsorption rate constant value of 2.91∙10-5 g/ (mmol min) for alumino-silicates, modified with BTM-3, corresponds to Cu (II) ions.


1940 ◽  
Vol 23 (5) ◽  
pp. 631-642 ◽  
Author(s):  
M. Delbrück

1. The adsorption rate constant of phage to bacterium is found to change between wide limits, depending on the physiological state of the bacterium. 2. The experiments of Krueger and of Schlesinger on the residual free phage in contact with an excess of bacteria are discussed and the view of Schlesinger, that they represent phage particles with reduced affinity to the bacterial host is supported by experiments. 3. The theory of von Smoluchowski and Schlesinger is compared with the experiments. 4. The implications of these findings for the assay methods currently used are discussed.


Langmuir ◽  
2000 ◽  
Vol 16 (10) ◽  
pp. 4573-4580 ◽  
Author(s):  
Chengdi Dong ◽  
Ching-Tien Hsu ◽  
Chin-Yuan Chiu ◽  
Shi-Yow Lin

2011 ◽  
Vol 29 (1) ◽  
pp. 71-82 ◽  
Author(s):  
Chongyang Zhou ◽  
Shujuan Feng ◽  
Gouqing Zhou ◽  
Yuren Jin ◽  
Junfu Liang ◽  
...  

2010 ◽  
Vol 3 (1) ◽  
pp. 32-38
Author(s):  
Nuryono Nuryono ◽  
V.V.H. Susanti ◽  
Narsito Narsito

In this research, the effect of Sangiran diatomaceous earth pre-treatment with sulfuric acid (H2SO4) and hydrochloric acid (HCl) on the kinetics of adsorption for Cr(III) in aqueous solution has been studied. The research has been carried out by mixing an amount of diatomeaeous earth with HCl or H2SO4 in various concentrations for two hours at temperature of 150 - 200°C. The mixture was washed with water until neutral, and the residue was dried at 70°C for four hours. The result then was used as adsorbent. Adsorption was carried out by mixing an amount of adsorbent with Cr(III) solution in various contact times. Ion adsorbed was determined by analyzing filtrate using atomic absorption spectrophotometry. The effect of pre-treatment on adsorption kinetics was evaluated based on kinetic parameters, i.e. constant of adsorption rate by using Langmuir-Hinshelwood kinetics and using two-process kinetics (fast and slow processes). Adsorption kinetics calculated using LH equation gave negative value for adsorption rate constant of zero order (k0). On the other words, the LH kinetics might not be applied for adsorption of Cr(III) to diatomaceous earth adsorbent. Results of kinetics study approached using two processes (fast and slow) showed that adsorption of Cr(III) occurred in two processes with rate constant of fast adsorption, kc, 0.041/min, rate constant of slow adsorption, kl, 0.0089/min, and of slow desorption, k'l, 0.089/menit. Pre-treatment with HCl up to 10 M decreased either kc, kl or k'l, while pre-treatment with H2SO4 1M increased kc to 0.061/min, decreased kl to 0.00424 and k'l to 0.0139/min. On pre-treatment with H2SO4 higher than 6 M significantly decreased three constants above. Based on the Gibbs energy change (4.31 - 6.79 kJ/mole) showed that adsorption involved physical interaction.   Keywords: adsorption, chromium, diatomaceous earth, kinetics, Langmuir-Hinshelwood


2005 ◽  
pp. 191-208 ◽  
Author(s):  
Alberto L. Horenstein ◽  
Ilaria Durelli ◽  
Fabio Malavasi

Sign in / Sign up

Export Citation Format

Share Document