Estimation of the Thermodynamic Properties of Fluid T2O in a Wide Range of Temperature and Pressure

1986 ◽  
pp. 326-335
Author(s):  
N. Matsunaga ◽  
A. Nagashima
Keyword(s):  
Thermodynamic Properties ◽  
Wide Range ◽  
Temperature And Pressure

Thermodynamic Properties of Pure and Mixed Thermal Plasmas Over a Wide Range of Temperature and Pressure

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Omid Askari
Keyword(s):  
Thermodynamic Properties ◽  
Specific Heat ◽  
Fluid Dynamic ◽  
Thermal Plasmas ◽  
Statistical Thermodynamic ◽  
Reference Source ◽  
Degree Of Ionization ◽  
Wide Range ◽  
Self Consistent ◽  
Temperature And Pressure

Chemical composition and thermodynamics properties of different thermal plasmas are calculated in a wide range of temperatures (300–100,000 K) and pressures (10−6–100 atm). The calculation is performed in dissociation and ionization temperature ranges using statistical thermodynamic modeling. The thermodynamic properties considered in this study are enthalpy, entropy, Gibbs free energy, specific heat at constant pressure, specific heat ratio, speed of sound, mean molar mass, and degree of ionization. The calculations have been done for seven pure plasmas such as hydrogen, helium, carbon, nitrogen, oxygen, neon, and argon. In this study, the Debye–Huckel cutoff criterion in conjunction with the Griem’s self-consistent model is applied for terminating the electronic partition function series and to calculate the reduction of the ionization potential. The Rydberg and Ritz extrapolation laws have been used for energy levels which are not observed in tabulated data. Two different methods called complete chemical equilibrium and progressive methods are presented to find the composition of available species. The calculated pure plasma properties are then presented as functions of temperature and pressure, in terms of a new set of thermodynamically self-consistent correlations for efficient use in computational fluid dynamic (CFD) simulations. The results have been shown excellent agreement with literature. The results from pure plasmas as a reliable reference source in conjunction with an alternative method are then used to calculate the thermodynamic properties of any arbitrary plasma mixtures (mixed plasmas) having elemental atoms of H, He, C, N, O, Ne, and Ar in their chemical structure.

scholarly journals Thermodynamic Properties of Aqueous Species Calculated Using the HKF Model: How Do Different Thermodynamic and Electrostatic Models for Solvent Water Affect Calculated Aqueous Properties?

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-24 ◽  
Author(s):  
George D. Miron ◽  
Allan M. M. Leal ◽  
Alina Yapparova
Keyword(s):  
Experimental Data ◽  
Dielectric Properties ◽  
Thermodynamic Properties ◽  
Elevated Temperatures ◽  
Rock Interaction ◽  
Water Solvent ◽  
Wide Range ◽  
Temperature And Pressure ◽  
The Impact ◽  
Aqueous Species

Thermodynamic properties of aqueous species are essential for modeling of fluid-rock interaction processes. The Helgeson-Kirkham-Flowers (HKF) model is widely used for calculating standard state thermodynamic properties of ions and complexes over a wide range of temperatures and pressures. To do this, the HKF model requires thermodynamic and electrostatic models of water solvent. In this study, we investigate and quantify the impact of choosing different models for calculating water solvent volumetric and dielectric properties, on the properties of aqueous species calculated using the HKF model. We identify temperature and pressure conditions at which the choice of different models can have a considerable effect on the properties of aqueous species and on fluid mineral equilibrium calculations. The investigated temperature and pressure intervals are 25–1000°C and 1–5 kbar, representative of upper to middle crustal levels, and of interest for modeling ore-forming processes. The thermodynamic and electrostatic models for water solvent considered are: Haar, Gallagher and Kell (1984), Wagner and Pruß (2002), and Zhang and Duan (2005), to calculate water volumetric properties, and Johnson and Norton (1991), Fernandez and others (1997), and Sverjensky and others (2014), to calculate water dielectric properties. We observe only small discrepancies in the calculated standard partial molal properties of aqueous species resulting from using different water thermodynamic models. However, large differences in the properties of charged species can be observed at higher temperatures (above 500°C) as a result of using different electrostatic models. Depending on the aqueous speciation and the reactions that control the chemical composition, the observed differences can vary. The discrepancy between various electrostatic models is attributed to the scarcity of experimental data at high temperatures. These discrepancies restrict the reliability of the geochemical modeling of hydrothermal and ore formation processes, and the retrieval of thermodynamic parameters from experimental data at elevated temperatures and pressures.

scholarly journals Pressure effect of the mechanical, electronics and thermodynamic properties of Mg–B compounds A first-principles investigations

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
GuoWei Zhang ◽  
Chao Xu ◽  
MingJie Wang ◽  
Ying Dong ◽  
FengEr Sun ◽  
...  
Keyword(s):  
Thermodynamic Properties ◽  
First Principles ◽  
Boron Content ◽  
Structural Parameters ◽  
Debye Model ◽  
Total Density ◽  
First Principle ◽  
Volume Deformation ◽  
Temperature And Pressure ◽  
Total Density Of States

AbstractFirst principle calculations were performed to investigate the structural, mechanical, electronic properties, and thermodynamic properties of three binary Mg–B compounds under pressure, by using the first principle method. The results implied that the structural parameters and the mechanical properties of the Mg–B compounds without pressure are well matched with the obtainable theoretically simulated values and experimental data. The obtained pressure–volume and energy–volume revealed that the three Mg–B compounds were mechanically stable, and the volume variation decreases with an increase in the boron content. The shear and volume deformation resistance indicated that the elastic constant Cij and bulk modulus B increased when the pressure increased up to 40 GPa, and that MgB7 had the strongest capacity to resist shear and volume deformation at zero pressure, which indicated the highest hardness. Meanwhile, MgB4 exhibited a ductility transformation behaviour at 30 GPa, and MgB2 and MgB7 displayed a brittle nature under all the considered pressure conditions. The anisotropy of the three Mg–B compounds under pressure were arranged as follows: MgB4 > MgB2 > MgB7. Moreover, the total density of states varied slightly and decreased with an increase in the pressure. The Debye temperature ΘD of the Mg–B compounds gradually increased with an increase in the pressure and the boron content. The temperature and pressure dependence of the heat capacity and the thermal expansion coefficient α were both obtained on the basis of Debye model under increased pressure from 0 to 40 GPa and increased temperatures. This paper brings a convenient understanding of the magnesium–boron alloys.

Estimation of the Thermodynamic Properties of Branched Hydrocarbons

2000 ◽  
Vol 122 (3) ◽  
pp. 147-152 ◽  
Author(s):  
Hui He ◽  
Mohamad Metghalchi ◽  
James C. Keck
Keyword(s):  
Thermodynamic Properties ◽  
Degrees Of Freedom ◽  
Statistical Thermodynamic ◽  
Motion Modes ◽  
Branched Alkanes ◽  
Branched Hydrocarbons ◽  
Wide Range ◽  
On Line ◽  
Kinetic Calculations ◽  
Good Agreement

A simple model has been developed to estimate the sensible thermodynamic properties such as Gibbs free energy, enthalpy, heat capacity, and entropy of hydrocarbons over a wide range of temperatures with special attention to the branched molecules. The model is based on statistical thermodynamic expressions incorporating translational, rotational and vibrational motions of the atoms. A method to determine the number of degrees of freedom for different motion modes (bending and torsion) has been established. Branched rotational groups, such as CH3 and OH, have been considered. A modification of the characteristic temperatures for different motion mode has been made which improves the agreement with the exact values for simple cases. The properties of branched alkanes up to 2,3,4,-trimthylpentane have been calculated and the results are in good agreement with the experimental data. A relatively small number of parameters are needed in this model to estimate the sensible thermodynamic properties of a wide range of species. The model may also be used to estimate the properties of molecules and their isomers, which have not been measured, and is simple enough to be easily programmed as a subroutine for on-line kinetic calculations. [S0195-0738(00)00902-X]

Spectrophotometry of Aqueous HNO3, H2SO4, and DCIO4 from 25° to 250°C

1968 ◽  
Vol 22 (5) ◽  
pp. 545-548 ◽  
Author(s):  
W. C. Waggener ◽  
A. J. Weinberger ◽  
R. W. Stoughton
Keyword(s):  
Cell Wall ◽  
Corrosion Products ◽  
Spectral Measurements ◽  
Wide Range ◽  
General Program ◽  
Cell Window ◽  
Temperature And Pressure

Dilute nitric, sulfuric, and perchloric acids are applicable as solvents for spectrophotometry up to 250°C over the following ranges: 0 to 1.0 f HNO3 from 0.6 to 1.2 μ; 0 to 0.2 f H2SO4 from 0.25 to 1.2 μ; and 0 to 1.0 f DClO4 from 0.25 to 1.8 μ. Each of these acids reacts measurably with the titanium cell wall and the sapphire windows at rates which increase with acidity and temperature. This corrosion affects the spectral measurements as a function of time and is associated with deterioration of cell window surfaces and the presence in the sample of dissolved and suspended corrosion products. These results are part of our more general program for the development of equipment and technique for routine spectrophotometry of pure liquids and solutions over a wide range of temperature and pressure.

The thermodynamic properties of mixed phospholipid bilayers: a theoretical analysis

1984 ◽  
Vol 62 (8) ◽  
pp. 796-802 ◽  
Author(s):  
Maryse Mondat ◽  
A. Georgallas ◽  
D. A. Pink ◽  
M. J. Zuckermann
Keyword(s):  
Experimental Data ◽  
Thermodynamic Properties ◽  
Reasonable Agreement ◽  
Phospholipid Bilayers ◽  
Scanning Calorimetry ◽  
Phase Separations ◽  
Lipid Mixtures ◽  
Wide Range ◽  
Acyl Chains ◽  
Gel Phase

A theoretical model is presented with the intention of describing lateral phase separations in binary lipid mixtures in which the acyl chains of the components differ in their length. The model includes explicitly interactions between the acyl chains and between polar heads of the lipid molecules. Phase diagrams and thermodynamic properties of binary lipid mixtures were calculated using a wide range of interaction parameters. It is shown that the occurrence of immiscibility in the gel phase is related to the interactions between the polar heads of the lipid molecules. The calculated results for binary lipid mixtures are compared with the available experimental data. In particular, the calculated specific heat for dilauroyl phosphatidylcholine – distearoyl phosphatidylcholine is in reasonable agreement with experimental results obtained from differential scanning calorimetry measurements.

Sign in / Sign up

Export Citation Format

Share Document