Adiabatic Polarization Potentials for the Water and Nitrogen Molecules. A Comparison of Large and Small Basis Sets

1981 ◽  
pp. 173-213 ◽  
Author(s):  
C. H. Douglass ◽  
David A. Weil ◽  
Patricia A. Charlier ◽  
Robert A. Eades ◽  
Donald G. Truhlar ◽  
...  
Keyword(s):  
Basis Sets

Experimental and Theoretical (ab initio and DFT) Analysis of UV-Vis Spectra, Thermodynamic Functions and Non-linear Optical Properties of 2-Chloro-3,4-Dimethoxybenzaldehyde

2015 ◽  
Vol 8 (2) ◽  
pp. 2122-2134
Author(s):  
Sarvendra Kumar ◽  
Rajesh Kumar ◽  
Jayant Teotia ◽  
M. K. Yadav
Keyword(s):  
Thermodynamic Functions ◽  
Title Compound ◽  
Density Functional ◽  
Structural Characteristics ◽  
Basis Sets ◽  
Ultraviolet Absorption Spectrum ◽  
Non Linear ◽  
Different Temperatures ◽  
Linear Optical Properties ◽  
Linear Optical

In the present work, UV- Visible spectra of 2-Chloro-3,4-Dimethoxybenzaldehyde (2,3,4-CDMB) compound  have been carried out experimentally and theoretically. The ultraviolet absorption spectrum of title compound in three solvents (Acetone, Diethyl Ether, CCl4) of different polarity were examined in the range of 200–500 nm. The structure of the molecule was optimized and the structural characteristics were determined by HF and DFT (B3LYP) methods with 6-31+G(d,p) and 6-311++G(d,p) as basis sets. The excitation energy, wavelength corresponds to absorption maxima () and oscillator strength (f) are calculated by Time-Dependent Density Functional Theory (TD-DFT) using B3LYP/6-31+G(d,p) and B3LYP/6-311++G(d,p) as basis sets. The electric dipole moment (μ), polarizability (α) and the first hyperpolarizability (β ) have been computed to evaluate the non-linear optical (NLO) response of the investigated compound by HF and DFT (B3LYP) with already mentioned basis sets. Thermodynamic functions of the title compound at different temperatures were also calculated.

Electronic Structure Benchmark Calculations of Inorganic and Biochemical Carboxylation Reactions

2018 ◽  
Author(s):  
Oscar A. Douglas-Gallardo ◽  
David A. Sáez ◽  
Stefan Vogt-Geisse ◽  
Esteban Vöhringer-Martinez
Keyword(s):  
Electronic Structure ◽  
Chemical Reactions ◽  
Density Functional ◽  
Correlation Energy ◽  
Electronic Energy ◽  
Basis Sets ◽  
Electronic Correlation ◽  
Correct Description ◽  
Carbon Dioxide Co2 ◽  
High Level

<div><div><div><p>Carboxylation reactions represent a very special class of chemical reactions that is characterized by the presence of a carbon dioxide (CO2) molecule as reactive species within its global chemical equation. These reactions work as fundamental gear to accomplish the CO2 fixation and thus to build up more complex molecules through different technological and biochemical processes. In this context, a correct description of the CO2 electronic structure turns out to be crucial to study the chemical and electronic properties associated with this kind of reactions. Here, a sys- tematic study of CO2 electronic structure and its contribution to different carboxylation reaction electronic energies has been carried out by means of several high-level ab-initio post-Hartree Fock (post-HF) and Density Functional Theory (DFT) calculations for a set of biochemistry and inorganic systems. We have found that for a correct description of the CO2 electronic correlation energy it is necessary to include post-CCSD(T) contributions (beyond the gold standard). These high-order excitations are required to properly describe the interactions of the four π-electrons as- sociated with the two degenerated π-molecular orbitals of the CO2 molecule. Likewise, our results show that in some reactions it is possible to obtain accurate reaction electronic energy values with computationally less demanding methods when the error in the electronic correlation energy com- pensates between reactants and products. Furthermore, the provided post-HF reference values allowed to validate different DFT exchange-correlation functionals combined with different basis sets for chemical reactions that are relevant in biochemical CO2 fixing enzymes.</p></div></div></div>

A Systematic DFT Study of Two Elementary Steps Involving Hydrogen Peroxide and the Hydroxyl Radical in the Fenton Reaction

2018 ◽  
Author(s):  
Danilo Carmona ◽  
David Contreras ◽  
Oscar A. Douglas-Gallardo ◽  
Stefan Vogt-Geisse ◽  
Pablo Jaque ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Hydroxyl Radical ◽  
Ab Initio ◽  
Fenton Reaction ◽  
Basis Set ◽  
Basis Sets ◽  
Dft Methods ◽  
Elementary Steps ◽  
Oxygen Oxygen ◽  
Complete Basis Set

The Fenton reaction plays a central role in many chemical and biological processes and has various applications as e.g. water remediation. The reaction consists of the iron-catalyzed homolytic cleavage of the oxygen-oxygen bond in the hydrogen peroxide molecule and the reduction of the hydroxyl radical. Here, we study these two elementary steps with high-level ab-initio calculations at the complete basis set limit and address the performance of different DFT methods following a specific classification based on the Jacob´s ladder in combination with various Pople's basis sets. Ab-initio calculations at the complete basis set limit are in agreement to experimental reference data and identified a significant contribution of the electron correlation energy to the bond dissociation energy (BDE) of the oxygen-oxygen bond in hydrogen peroxide and the electron affinity (EA) of the hydroxyl radical. The studied DFT methods were able to reproduce the ab-initio reference values, although no functional was particularly better for both reactions. The inclusion of HF exchange in the DFT functionals lead in most cases to larger deviations, which might be related to the poor description of the two reactions by the HF method. Considering the computational cost, DFT methods provide better BDE and EA values than HF and post--HF methods with an almost MP2 or CCSD level of accuracy. However, no systematic general prediction of the error based on the employed functional could be established and no systematic improvement with increasing the size in the Pople's basis set was found, although for BDE values certain systematic basis set dependence was observed. Moreover, the quality of the hydrogen peroxide, hydroxyl radical and hydroxyl anion structures obtained from these functionals was compared to experimental reference data. In general, bond lengths were well reproduced and the error in the angles were between one and two degrees with some systematic trend with the basis sets. From our results we conclude that DFT methods present a computationally less expensive alternative to describe the two elementary steps of the Fenton reaction. However, choice of approximated functionals and basis sets must be carefully done and the provided benchmark allows a systematic validation of the electronic structure method to be employed

DFT Benchmark Study of the O--O Bond Dissociation Energy in Peroxides Validated with High-Level Ab-Initio Calculations

2019 ◽  
Author(s):  
Danilo Carmona ◽  
Pablo Jaque ◽  
Esteban Vöhringer-Martinez
Keyword(s):  
Reference Value ◽  
Basis Set ◽  
Basis Sets ◽  
Mean Deviation ◽  
Bond Dissociation ◽  
Dissociation Energies ◽  
The Mean ◽  
Experimental Values ◽  
High Level ◽  
Almost All

<div><div><div><p>Peroxides play a central role in many chemical and biological pro- cesses such as the Fenton reaction. The relevance of these compounds lies in the low stability of the O–O bond which upon dissociation results in radical species able to initiate various chemical or biological processes. In this work, a set of 64 DFT functional-basis set combinations has been validated in terms of their capability to describe bond dissociation energies (BDE) for the O–O bond in a database of 14 ROOH peroxides for which experimental values ofBDE are available. Moreover, the electronic contributions to the BDE were obtained for four of the peroxides and the anion H2O2− at the CBS limit at CCSD(T) level with Dunning’s basis sets up to triple–ζ quality provid- ing a reference value for the hydrogen peroxide anion as a model. Almost all the functionals considered here yielded mean absolute deviations around 5.0 kcal mol−1. The smallest values were observed for the ωB97 family and the Minnesota M11 functional with a marked basis set dependence. Despite the mean deviation, order relations among BDE experimental values of peroxides were also considered. The ωB97 family was able to reproduce the relations correctly whereas other functionals presented a marked dependence on the chemical nature of the R group. Interestingly, M11 functional did not show a very good agreement with the established order despite its good performance in the mean error. The obtained results support the use of similar validation strategies for proper prediction of BDE or other molecular properties by DF Tmethods in subsequent related studies.</p></div></div></div>

Benchmark of Simplified Time-Dependent Density Functional Theory for UV-Vis Spectral Properties of Porphyrinoids

2019 ◽  
Author(s):  
Kamal Batra ◽  
Stefan Zahn ◽  
Thomas Heine
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Large Scale ◽  
Absolute Error ◽  
Time Dependent ◽  
Basis Set ◽  
Basis Sets ◽  
Functional Theory ◽  
Framework Materials ◽  
Dependent Density

<p>We thoroughly benchmark time-dependent density- functional theory for the predictive calculation of UV/Vis spectra of porphyrin derivatives. With the aim to provide an approach that is computationally feasible for large-scale applications such as biological systems or molecular framework materials, albeit performing with high accuracy for the Q-bands, we compare the results given by various computational protocols, including basis sets, density-functionals (including gradient corrected local functionals, hybrids, double hybrids and range-separated functionals), and various variants of time-dependent density-functional theory, including the simplified Tamm-Dancoff approximation. An excellent choice for these calculations is the range-separated functional CAM-B3LYP in combination with the simplified Tamm-Dancoff approximation and a basis set of double-ζ quality def2-SVP (mean absolute error [MAE] of ~0.05 eV). This is not surpassed by more expensive approaches, not even by double hybrid functionals, and solely systematic excitation energy scaling slightly improves the results (MAE ~0.04 eV). </p>

Quantitative Structure- Property Relationship (QSPR) Investigation of Camptothecin Drugs Derivatives

2018 ◽  
Vol 21 (7) ◽  
pp. 533-542 ◽  
Author(s):  
Neda Ahmadinejad ◽  
Fatemeh Shafiei ◽  
Tahereh Momeni Isfahani
Keyword(s):  
Thermodynamic Properties ◽  
Predictive Ability ◽  
Total Sample ◽  
Basis Sets ◽  
Quantitative Structure ◽  
Structure Property ◽  
Quantitative Structure Property Relationship ◽  
Chemical Structures ◽  
Property Relationship ◽  
Structure Property Relationship

Aim and Objective: Quantitative Structure- Property Relationship (QSPR) has been widely developed to derive a correlation between chemical structures of molecules to their known properties. In this study, QSPR models have been developed for modeling and predicting thermodynamic properties of 76 camptothecin derivatives using molecular descriptors. Materials and Methods: Thermodynamic properties of camptothecin such as the thermal energy, entropy and heat capacity were calculated at Hartree–Fock level of theory and 3-21G basis sets by Gaussian 09. Results: The appropriate descriptors for the studied properties are computed and optimized by the genetic algorithms (GA) and multiple linear regressions (MLR) method among the descriptors derived from the Dragon software. Leave-One-Out Cross-Validation (LOOCV) is used to evaluate predictive models by partitioning the total sample into training and test sets. Conclusion: The predictive ability of the models was found to be satisfactory and could be used for predicting thermodynamic properties of camptothecin derivatives.

Quantum-chemical analysis of small silver clusters

1987 ◽  
Vol 52 (7) ◽  
pp. 1652-1657 ◽  
Author(s):  
Grigorii V. Gadiyak ◽  
Yurii N. Morokov ◽  
Mojmír Tomášek
Keyword(s):  
Hard Spheres ◽  
Electronic Configuration ◽  
Close Packing ◽  
Basis Sets ◽  
Silver Clusters ◽  
Quantum Chemical Analysis ◽  
Spin Distribution ◽  
Spin Polarized ◽  
Atomic Silver ◽  
Equilibrium Geometries

Total energy calculations of three- and four-atomic silver clusters have been performed by the spin-polarized version of the CNDO/2 method to get the most stable equilibrium geometries, atomization energies, and charge and spin distribution on the atoms for three different basis sets: {s}, {sp}, and {spd}. When viewed from the equilateral triangle and square geometries, the last electronic configuration, i.e. the {spd} one, appears to be most stable with respect to the geometrical deformations considered. In this case, the behaviour of the atoms of both clusters resembles that of hard spheres (i.e. close-packing).

Introduction to Relativistic Quantum Chemistry

2007 ◽  
Author(s):  
Kenneth G. Dyall ◽  
Knut Faegri
Keyword(s):  
Dirac Equation ◽  
Quantum Chemistry ◽  
Relativistic Theory ◽  
Density Functional ◽  
Relativistic Quantum ◽  
Relativistic Effects ◽  
Basis Sets ◽  
Spin Orbit ◽  
Approximate Methods ◽  
Nonrelativistic Theory

This book provides an introduction to the essentials of relativistic effects in quantum chemistry, and a reference work that collects all the major developments in this field. It is designed for the graduate student and the computational chemist with a good background in nonrelativistic theory. In addition to explaining the necessary theory in detail, at a level that the non-expert and the student should readily be able to follow, the book discusses the implementation of the theory and practicalities of its use in calculations. After a brief introduction to classical relativity and electromagnetism, the Dirac equation is presented, and its symmetry, atomic solutions, and interpretation are explored. Four-component molecular methods are then developed: self-consistent field theory and the use of basis sets, double-group and time-reversal symmetry, correlation methods, molecular properties, and an overview of relativistic density functional theory. The emphases in this section are on the basics of relativistic theory and how relativistic theory differs from nonrelativistic theory. Approximate methods are treated next, starting with spin separation in the Dirac equation, and proceeding to the Foldy-Wouthuysen, Douglas-Kroll, and related transformations, Breit-Pauli and direct perturbation theory, regular approximations, matrix approximations, and pseudopotential and model potential methods. For each of these approximations, one-electron operators and many-electron methods are developed, spin-free and spin-orbit operators are presented, and the calculation of electric and magnetic properties is discussed. The treatment of spin-orbit effects with correlation rounds off the presentation of approximate methods. The book concludes with a discussion of the qualitative changes in the picture of structure and bonding that arise from the inclusion of relativity.

Double even tempering of orbital exponents: Application to Roothaan-Hartree-Fock calculations for He through Xe in Slater-type basis sets

1994 ◽  
Vol 88 (4) ◽  
pp. 273-283 ◽  
Author(s):  
Toshikatsu Koga ◽  
Hiroshi Tatewaki ◽  
Ajit J. Thakkar
Keyword(s):  
Basis Sets ◽  
Slater Type ◽  
Hartree Fock ◽  
Orbital Exponents
Sign in / Sign up

Export Citation Format

Share Document