Multi-disciplinary Engineering of Production Systems – Challenges for Quality of Control Software

2018 ◽  
pp. 3-13 ◽  
Author(s):  
Arndt Lüder ◽  
Johanna-Lisa Pauly ◽  
Konstantin Kirchheim
Keyword(s):  
Production Systems ◽  
Control Software ◽  
Quality Of Control

scholarly journals MICOSE4aPS: Industrially Applicable Maturity Metric to Improve Systematic Reuse of Control Software

2022 ◽  
Vol 31 (1) ◽  
pp. 1-24
Author(s):  
Birgit Vogel-Heuser ◽  
Eva-Maria Neumann ◽  
Juliane Fischer
Keyword(s):  
Food Packaging ◽  
Manufacturing Industry ◽  
Production Systems ◽  
System Quality ◽  
Control Software ◽  
Mechatronic Systems ◽  
Automated Production ◽  
Quality Of Control ◽  
Software Modules ◽  
Systematic Reuse

automated Production Systems (aPS) are highly complex, mechatronic systems that usually have to operate reliably for many decades. Standardization and reuse of control software modules is a core prerequisite to achieve the required system quality in increasingly shorter development cycles. However, industrial case studies in aPS show that many aPS companies still struggle with strategically reusing software. This paper proposes a metric-based approach to objectively measure the m aturity of i ndustrial IEC 61131-based co ntrol s oftwar e in aPS (MICOSE4aPS) to identify potential weaknesses and quality issues hampering systematic reuse. Module developers in the machine and plant manufacturing industry can directly benefit as the metric calculation is integrated into the software engineering workflow. An in-depth industrial evaluation in a top-ranked machine manufacturing company in food packaging and an expert evaluation with different companies confirmed the benefit of efficiently managing the quality of control software.

Experience with the Relay Procedure for Tuning Controllers in Automatic Control of Chlorination

1993 ◽  
Vol 28 (11-12) ◽  
pp. 257-261
Author(s):  
M. Truett Garrett ◽  
Zaki Ahmad ◽  
Shelly Young
Keyword(s):  
Wastewater Treatment ◽  
Automatic Control ◽  
Time Constant ◽  
Wastewater Treatment Plants ◽  
Relay Feedback ◽  
Quality Of Control ◽  
Incomplete Mixing ◽  
Long Time ◽  
Chlorine Demand

The recent requirements by U.S.E.P.A. for dechlorination and biomonitoring have increased the importance of automatic control of effluent chlorination in wastewater treatment plants. Difficulties with the Ziegler-Nichols controller tuning procedure were reported at the Kyoto Workshop, 1990. Problems are caused by the noise of incomplete mixing, a long time constant, and the disturbances of changing flow and chlorine demand. The Astrom-Hagglund relay feedback procedure provides acceptable control while data is logged to determine the controller constants. Experiences in using the procedure in existing facilities (not redesigning the mixing point) and the quality of control are presented.

ANALISIS DE CALIDAD DE SERVICIO EN REDES IPv6

2016 ◽  
Vol 26 (1) ◽  
pp. 7
Author(s):  
Jose Carlos Tavara Carbajal
Keyword(s):  
Quality Of Service ◽  
Packet Loss ◽  
Traffic Control ◽  
Video Traffic ◽  
Control Software ◽  
Delay Jitter ◽  
End To End Delay ◽  
Analysis Of Results ◽  
Ipv6 Protocol

RESUMENEste documento tiene como objetivo analizar el comportamiento de la calidad del servicio del protocolo IPv6 sobre el tráfico de video, para esto se realizó sobre un entorno real y se llevó acabo el análisis de resultados a través de un software estadístico de control del tráfico.Palabras Clave.-  Calidad de Servicio, Ancho de Banda, Retardo, Fluctuación de Retardo, Pérdidas de Paquetes.ABSTRACTThis paper has aimed to analyze of the service quality of the IPv6 protocol on video traffic, this was about a real environment and was conducted analysis of results through statistical traffic control software. Key words- Quality of Service, Bandwidth, End to end delay, Jitter, Packet loss.

ANALISIS DE CALIDAD DE SERVICIO EN REDES IPv6

2016 ◽  
Vol 26 (1) ◽  
pp. 1
Author(s):  
Jose Carlos Tavara Carbajal
Keyword(s):  
Quality Of Service ◽  
Packet Loss ◽  
Traffic Control ◽  
Video Traffic ◽  
Control Software ◽  
Delay Jitter ◽  
End To End Delay ◽  
Analysis Of Results ◽  
Ipv6 Protocol

Este documento tiene como objetivo analizar el comportamiento de la calidad del servicio del protocolo IPv6 sobre el tráfico de video, para esto se realizó sobre un entorno real y se llevó acabo el análisis de resultados a través de un software estadístico de control del tráfico.Palabras Clave.-  Calidad de Servicio, Ancho de Banda, Retardo, Fluctuación de Retardo, Pérdidas de Paquetes.ABSTRACT  This paper has aimed to analyze of the service quality of the IPv6 protocol on video traffic, this was about a real environment and was conducted analysis of results through statistical traffic control software.  Key words.- Quality of Service, Bandwidth, End to end delay, Jitter, Packet loss.

ANALISIS DE CALIDAD DE SERVICIO EN REDES IPv6

2016 ◽  
Vol 26 (1) ◽  
pp. 7
Author(s):  
Jose Carlos Tavara Carbajal
Keyword(s):  
Quality Of Service ◽  
Packet Loss ◽  
Traffic Control ◽  
Video Traffic ◽  
Control Software ◽  
Delay Jitter ◽  
End To End Delay ◽  
Analysis Of Results ◽  
Ipv6 Protocol

RESUMENEste documento tiene como objetivo analizar el comportamiento de la calidad del servicio del protocolo IPv6 sobre el tráfico de video, para esto se realizó sobre un entorno real y se llevó acabo el análisis de resultados a través de un software estadístico de control del tráfico.Palabras Clave.-  Calidad de Servicio, Ancho de Banda, Retardo, Fluctuación de Retardo, Pérdidas de Paquetes.ABSTRACTThis paper has aimed to analyze of the service quality of the IPv6 protocol on video traffic, this was about a real environment and was conducted analysis of results through statistical traffic control software. Keywords- Quality of Service, Bandwidth, End to end delay, Jitter, Packet loss.

scholarly journals Quality of Control in the Tavis–Cummings–Hubbard Model

2021 ◽  
Author(s):  
R. Düll ◽  
A. Kulagin ◽  
W. Lee ◽  
Yu. Ozhigov ◽  
H. Miao ◽  
...  
Keyword(s):  
Hubbard Model ◽  
Quality Of Control

Design of Hydraulic Descaling Computer Control System

2014 ◽  
Vol 608-609 ◽  
pp. 19-22
Author(s):  
Ping Xu ◽  
Jian Gang Yi
Keyword(s):  
Control System ◽  
Stability Problem ◽  
Computer Control ◽  
Control Methods ◽  
Computer Control System ◽  
Control Software ◽  
Pressure Water ◽  
Working Principle ◽  
The Stability

Hydraulic descaling system is the key device to ensure the surface quality of billet. However, traditional control methods lead to the stability problem in hydraulic descaling system. To solve the problem, the construction of the hydraulic descaling computer control system is studied, the working principle of the system is analyzed, and the high pressure water bench of hydraulic descaling is designed. Based on it, the corresponding computer control software is developed. The application shows that the designed system is stable in practice, which is helpful for enterprise production.

ON ASSESSMENT OF THE QUALITY OF CONTROL AND SORTING MACHINES. PART I

2021 ◽  
pp. 27-33
Author(s):  
YA.L. LIBERMAN ◽  
◽  
L.N. GORBUNOVA ◽  
Keyword(s):  
Quality Of Control
Sign in / Sign up

Export Citation Format

Share Document