Technical Justification for an Ultrasonic Inspection Procedure Applied to a Helicopter Component

2019 ◽  
pp. 1138-1149
Author(s):  
Muzibur Khan
Keyword(s):  
Ultrasonic Inspection

A Practical Ultrasonic Inspection Method for Detecting and Characterising Defects Found Within Composite Repairs

2018 ◽  
Author(s):  
J Downing ◽  
A Hook
Keyword(s):  
Wall Thickness ◽  
Steel Substrate ◽  
Ultrasonic Method ◽  
Ultrasonic Inspection ◽  
Heat Exposure ◽  
Matrix Cracking ◽  
Ultrasonic Technique ◽  
Inspection Method ◽  
Composite Repairs ◽  
Layered Matrix

Two steel substrate test panels were developed to represent common plate thicknesses found on naval vessels and scanned using the Babcock developed ultrasonic technique. One sample comprised of a series of slotted surface breaking flaws of varying widths and through thicknesses to represent fracturing/cracking. The inspection method detected simulated cracking to a depth of 2mm and 0.5mm in width. The second sample included numerous loss of wall thickness areas of varying diameters and through thicknesses, with the smallest detectable loss of wall thickness being 0.1mm at a 15mm diameter. After proving confidence in detection, there was a need to characterise flaws to provide support and ascertain a repair action. Samples were produced that were subjected to either impact or heat exposure to induce realistic representative damage. The practical ultrasonic method was successfully used to independently characterise between the samples, with induced de-laminations caused by blisters, and multi layered matrix cracking caused by varying levels of projectile impacts, due to their unique morphology.

Ultrasonic Inspection of Austenitic Stainless Steel Weldments—Our Experiences

1983 ◽  
Vol 15 (3) ◽  
pp. 91
Author(s):  
V. C. Padaki ◽  
P. Barat ◽  
Baldev Raj ◽  
D. K. Bhattacharya
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Ultrasonic Inspection

scholarly journals Capability of Advanced Ultrasonic Inspection Technologies for Hydraulic Turbine Runners

2021 ◽  
Vol 11 (10) ◽  
pp. 4681
Author(s):  
Mohammad Ebrahim Bajgholi ◽  
Gilles Rousseau ◽  
Martin Viens ◽  
Denis Thibault
Keyword(s):  
Ultrasonic Inspection ◽  
High Stress ◽  
Welding Process ◽  
Hydraulic Turbine ◽  
Francis Turbine ◽  
Detection Rates ◽  
Critical Range ◽  
Area Of Interest ◽  
Ambitious Program ◽  
Pulse Echo

This paper presents the results of a project aimed at evaluating the performance of ultrasonic techniques for detecting flaws in Francis turbine runners. This work is the first phase of a more ambitious program aimed at improving the reliability of inspection of critical areas in turbine runners. Francis runners may be utilized to supply power during peak periods, which means that they experience additional load stress associated with start and stop sequences. Inspection during manufacturing is then of paramount importance to remove as much as feasible all flaw initiation sites before the heat treatment. This phase one objective is to collect initial data on a simplified mock-up and then to compare the experimental ultrasonic data with the results of simulations performed by CIVA, a computer simulation package. The area of interest is the region with the highest stress between the blade and the web. A welded T-joint coupon made of UNS S41500 was manufactured to represent this high-stress area. During the FCAW welding process, ceramic beads were embedded in the weld to create discontinuities whose size is in the critical range to initiate a crack. Inspection of the material was carried out by various nondestructive testing (NDT) methods namely conventional pulse-echo, phased array, total focusing method (TFM). With these results, detection rates were obtained in order to compare the effectiveness of each method.

scholarly journals A Study on the Efficiency of the Ultrasonic Inspection with an Optimization Method

2012 ◽  
Vol 78 (790) ◽  
pp. 1984-1994
Author(s):  
Tomonori WATANABE ◽  
Naoyuki SYOJI ◽  
Ning HU
Keyword(s):  
Ultrasonic Inspection ◽  
Optimization Method

Ultrasonic inspection of welded joints by the mirror‐shadow method

2002 ◽  
Vol 16 (5) ◽  
pp. 408-411
Author(s):  
E M Komov ◽  
M E Komov ◽  
V V Sokovnin
Keyword(s):  
Welded Joints ◽  
Ultrasonic Inspection ◽  
Shadow Method
Sign in / Sign up

Export Citation Format

Share Document