Engineering Compendium on Radiation Shielding

1975 ◽  
Keyword(s):  
Radiation Shielding

Comparison of Lead, Copper and Aluminium as Gamma Radiation Shielding Material through Experimental Measurements and Simulation Using MCNP Version 4c

2018 ◽  
Vol 9 (08) ◽  
pp. 20193-20206 ◽  
Author(s):  
Md. Akhlak Bin Aziz ◽  
Md. Faisal Rahman ◽  
Md. Mahidul Haque Prodhan
Keyword(s):  
Gamma Radiation ◽  
Sodium Iodide ◽  
Experimental Approach ◽  
Radiation Shielding ◽  
Test Material ◽  
Simulation Techniques ◽  
Radiation Sources ◽  
Simulation Monte Carlo ◽  
Shielding Material ◽  
Code Version

The paper compares  Lead, Copper and Aluminium as gamma radiation shielding material using both experimental and simulation techniques. Cs- 137 (662KeV), Na-22 (511KeV) and Na- 22(1274KeV) were used as gamma radiation sources and a sodium iodide (NaI) detector was used to detect the radiation. Variations were noted for detected gamma count rates by changing shielding material thickness. In the experimental approach, thickness was varied by placing sheets of a particular test material one by one. For simulation, Monte Carlo n- Particle (MCNP) code version 4c was used and the geometry of the whole experimental setup was plotted in it. The results were then compared for each test material and it was found that lead is the best shielding material for gamma radiation followed by copper and aluminium.

WIELAND DURO TUNGSTEN

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Modulus Of Elasticity ◽  
Radiation Shielding ◽  
High Melting ◽  
High Modulus ◽  
High Melting Point ◽  
Structural Applications ◽  
Very High

Abstract Wieland Duro Tungsten is unalloyed tungsten produced from pressed-and-sintered billets. The high melting point of tungsten makes it an obvious choice for structural applications exposed to very high temperatures. Tungsten is used at lower temperatures for applications that can benefit from its high density, high modulus of elasticity, or radiation shielding capability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining. Filing Code: W-34. Producer or source: Wieland Duro GmbH.

SD 170/175/180/185

Alloy Digest ◽  
2005 ◽  
Vol 54 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Radiation Shielding ◽  
High Density

Abstract The SD group is part of the Densalloy family of materials, which are high-density alloys used for a variety of applications, from counterbalance weights to radiation shielding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: W-28. Producer or source: Tungsten Products, An Allegheny Technologies Company.

DENSALLOY DENS21/DENS23/DENS25

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Radiation Shielding ◽  
Heavy Alloys ◽  
Tungsten Heavy Alloys

Abstract Densalloy alloys are tungsten heavy alloys for applications ranging from use in radiation shielding to use in pins for ejection molding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and machining. Filing Code: W-27. Producer or source: Tungsten Products, An Allegheny Technologies Company.

KENNERTIUM W-2

Alloy Digest ◽  
1964 ◽  
Vol 13 (9) ◽  
Keyword(s):  
Compressive Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Radiation Shielding ◽  
High Density

Abstract Kennertium W-2 is a high density tungsten-base alloy having strength, rigidity, ductility and good machinability. It is recommended for gyro rotors, counterweights, governors, radiation shielding and similar applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on heat treating, machining, and joining. Filing Code: W-7. Producer or source: Kennametal Inc..

An Innovation of Radiation Shielding for Safety of Whole Spine Radiographs

2018 ◽  
Vol 14 (01) ◽  
pp. 36-42
Author(s):  
Tiwa Jaiyai ◽  
Suritsorn Yuktanan ◽  
Chirotchana Suchato ◽  
Eduardo de Goes Nakano ◽  
Thanis Saksirinukul
Keyword(s):  
Radiation Shielding ◽  
Whole Spine ◽  
Spine Radiographs

scholarly journals The Role of La2O3 in Enhancement the Radiation Shielding Efficiency of the Tellurite Glasses: Monte-Carlo Simulation and Theoretical Study

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3913
Author(s):  
Aljawhara H. Almuqrin ◽  
Mohamed Hanfi ◽  
K. G. Mahmoud ◽  
M. I. Sayyed ◽  
Hanan Al-Ghamdi ◽  
...  
Keyword(s):  
Monte Carlo Simulation ◽  
Theoretical Study ◽  
Radiation Shielding ◽  
Photon Flux ◽  
Transmission Factor ◽  
Tellurite Glasses ◽  
Attenuation Coefficients ◽  
Binary Glass ◽  
Buildup Factors

The radiation shielding competence was examined for a binary glass system xLa2O3 + (1 − x) TeO2 where x = 5, 7, 10, 15, and 20 mol% using MCNP-5 code. The linear attenuation coefficients (LACs) of the glasses were evaluated, and it was found that LT20 glass has the greatest LAC, while LT5 had the least LAC. The transmission factor (TF) of the glasses was evaluated against thicknesses at various selected energies and was observed to greatly decrease with increasing thickness; for example, at 1.332 MeV, the TF of the LT5 glass decreased from 0.76 to 0.25 as the thickness increased from 1 to 5 cm. The equivalent atomic number (Zeq) of the glasses gradually increased with increasing photon energy above 0.1 MeV, with the maximum values observed at around 1 MeV. The buildup factors were determined to evaluate the accumulation of photon flux, and it was found that the maximum values for both can be seen at around 0.8 MeV. This research concluded that LT20 has the greatest potential in radiation shielding applications out of the investigated glasses due to the glass having the most desirable parameters.

A comparative Study Between Fluka and Microshield Modeling Calculations to study the Radiation‐Shielding of Nanoparticles and Plastic Waste composites

2021 ◽  
Author(s):  
Atef El‐Taher ◽  
Hesham M. H. Zakaly ◽  
Mariia Pyshkina ◽  
Elhassan A. Allam ◽  
Rehab M. El‐Sharkawy ◽  
...  
Keyword(s):  
Comparative Study ◽  
Radiation Shielding ◽  
Plastic Waste

Effect of soot on thermal radiation shielding performance of water mist

2021 ◽  
Vol 123 ◽  
pp. 103363
Author(s):  
Hiroki Gonome ◽  
Yuto Takagi ◽  
Taichi Nagao ◽  
Mizuho Ono
Keyword(s):  
Thermal Radiation ◽  
Water Mist ◽  
Radiation Shielding
Sign in / Sign up

Export Citation Format

Share Document