Structural Automotive Components in Fibre Reinforced Plastics

1985 ◽  
pp. 19-42 ◽  
Author(s):  
A. J. Wootton ◽  
J. C. Hendry ◽  
A. K. Cruden ◽  
J. D. A. Hughes
2015 ◽  
Vol 1 (1) ◽  
pp. 38-44
Author(s):  
G. V. VAGANOV ◽  
◽  
V. E. YUDIN ◽  
V. YU ELOKHOVSKY ◽  
L. A. MYAGKOVA ◽  
...  

INEOS OPEN ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 64-70
Author(s):  
O. N. Zabegaeva ◽  
◽  
D. A. Sapozhnikov ◽  
B. A. Bayminov ◽  
S. A. Zinov'eva ◽  
...  

2019 ◽  
Vol 13 (2) ◽  
pp. 55
Author(s):  
Indar Khaerunnisa ◽  
Edy Cahyadi

The Indonesian government has set the motor vehicle industry as one of the priority industries of the national interest, economic growth, and increased productivity. In order for the survival of a company is maintained, then the management should be able to maintain or even more spur increased performance. Various analyzes were developed to predict the beginning of the bankruptcy of the company. One analysis is widely used today is the analysis of Altman Z-Score, which this analysis refers to the financial ratios of the company. The purpose of this study was to analyze the bankruptcy of the automotive components companies that go public in Indonesia Stock Exchange year period 2011–2015. This study used a sample of four companies from the automotive components sector. Source of data is done by using secondary data. The data is processed by the method of the Z-score formula Z = 1,2X1 + 1,4X2 + 3,3X3 + 0,6X4 + 0,999X5. With the description of Z < 1,8 the company categorized into unhealthy/will be bankrupt, the value Z 1,8 < 2,99 the company is considered to be in the uncertain/grey area and the value of Z > 2,99 then the company is in a very healthy. In general, the results of these studies indicate that the four automtive components companies namely PT Astra Otoparts year 2011 value of Z = 14,67 year 2012 value of Z = 10,88 year 2013 value of Z = 13,90 year 2014 value of Z = 10,54 year 2015 value of Z = 4,94, PT Gajah Tunggal year 2011 value of Z = 5,72 year 2012 value of Z = 4,75 year 2013 value of Z = 3,10 year 2014 value of Z = 2,79 year 2015 value of Z = 1,58 and the average value of 2011-2015 periode Z = 3,59, PT Goodyear Indonesia year 2011 value of Z = 2,07 year 2012 value of Z = 2,44 year 2013 value of Z = 2,57 year 2014 value of Z = 2,02 year 2015 value of Z = 2,76, PT Indomobil Sukses Internasional year 2011 value of Z = 6,19 year 2012 value of Z = 3,99 year 2013 value of Z = 3,17 year 2014 value of Z = 2,59 year 2015 value of Z = 1,74. The average value 2011-2015 period showed 3 companies are in very healthy state and 1 company is in the uncertain/grey area. Keywords: Financial Ratio Analysis, Analysis of bankruptcy, Altman Z-Score Analysis, Automotive Components Company, Go Public.


A study review of aging polymer composite materials (PCM) under different heat-moisture conditions or water exposure with the sequential or parallel influence of static or cyclic loads in laboratory conditions is presented. The influence of tension and bending loads is compared. Conditions of the different load influence on parameters of carbon-reinforced plastics and glass-reinforced plastics are discussed. Equipment and units for climatic tests of PCM under loading are described. Simulation examples of indices of mechanical properties of PCM under the influence of environment and loads are shown.


A study review of aging polymer composite materials (PCM) under different heat-moisture conditions or water exposure with the sequential or parallel influence of static or cyclic loads in laboratory conditions is presented. The influence of tension and bending loads is compared. Conditions of the different load influence on parameters of carbon-reinforced plastics and glass-reinforced plastics are discussed. Equipment and units for climatic tests of PCM under loading are described. Simulation examples of indices of mechanical properties of PCM under the influence of environment and loads are shown.


Alloy Digest ◽  
2019 ◽  
Vol 68 (6) ◽  

Abstract CP-K 570Y780T is one of a family of complex-phase steels, CP-W and CP-K, that offer very high strengths and yield points. They are particularly suitable for weight-saving production of cold-formed, crash-relevant automotive components such as side impact intrusion beams, B-pillar reinforcements,profiles, cross members, body reinforcements, bumper bars, and chassis parts. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on heat treating. Filing Code: SA-848. Producer or source: ThyssenKrupp Steel Europe AG.


Sign in / Sign up

Export Citation Format

Share Document