Development of Analytical Method to Determine the Deflection of Tapered Cantilever Beam with Inclined Loading Condition Using Software Simulation

This study derived analytical solutions for the deflection of a rectangular cross sectional uniformly tapered cantilever beam with varying configurations of width and breadth acting under an end point load. The deflection equations were derived using a numerical analysis method known as the finite element method. The verification of these analytical solutions was done by deterministic optimisation of the equations using the ModelCenter reliability analysis software and the Abaqus finite element modelling and optimisation software. The results obtained show that the best element type for the finite element analysis of a tapered cantilever beam acting under an end point load is the C3D20RH (A 20-node quadratic brick, hybrid element with linear pressure and reduced integration) beam element; it predicted an end displacement of 0.05035 m for the tapered width, constant height cantilever beam which was the closest value to the analytical optimum of 0.05352 m. The little difference in the deflection value accounted for the numerical error which is inevitably present in the analyses of structural systems. It is recommended that detailed and accurate numerical analysis be adopted in the design of complex structural systems in order to ascertain the degree of uncertainty in design. Keywords: Deflection, Finite element method, deterministic optimisation, numerical error, cantilever beam.

Download Full-text

Nonlinear forced vibration analysis of a rotating three-dimensional tapered cantilever beam

Journal of Vibration and Control ◽

10.1177/1077546320949716 ◽

2020 ◽

pp. 107754632094971 ◽

Cited By ~ 1

Author(s):

Yanxun Zhou ◽

Yimin Zhang ◽

Guo Yao

Keyword(s):

Cantilever Beam ◽

Forced Vibration ◽

Vibration Analysis ◽

Three Dimensional ◽

Time History ◽

Excitation Amplitude ◽

Axial Deformation ◽

Nonlinear Forced Vibration ◽

Tapered Cantilever Beam ◽

Forced Vibration Analysis

In this article, nonlinear forced vibration analysis is carried out for a rotating three-dimensional tapered cantilever beam subjected to a uniformly distributed load. Considering the effects of Coriolis terms, static axial deformation and geometric nonlinearity in modeling process, nonlinear partial motion equations of a rotating tapered Euler–Bernoulli beam are established by using Hamilton’s principle. Galerkin’s procedure is used to discretize the equations to obtain the dynamic response of the beam. Frequency responses, the time-history response, the phase diagram, and the Poincaré map are introduced to study the effects of the taper ratio, rotating velocity, radius of hub, and external excitation on the nonlinear resonances and detailed responses of the rotating three-dimensional tapered beam. Results show that the fundamental natural frequency increases with the increase of the taper ratio, radius of hub, and rotating velocity. Besides, by increasing the taper ratio and excitation amplitude and decreasing the rotating velocity and radius of hub, the nonlinearity and vibration amplitude of the rotating beam intensify.

Download Full-text

Free and forced vibrations of a tapered cantilever beam carrying multiple point masses

STRUCTURAL ENGINEERING AND MECHANICS ◽

10.12989/sem.2006.23.2.209 ◽

2006 ◽

Vol 23 (2) ◽

pp. 209-216 ◽

Cited By ~ 1

Author(s):

Der-Wei Chen ◽

Tsung-Lung Liu

Keyword(s):

Cantilever Beam ◽

Forced Vibrations ◽

Multiple Point ◽

Free And Forced Vibrations ◽

Tapered Cantilever Beam

Download Full-text

423 Analytical Method of Stability Criterion for Collision Vibration System in Cantilever Beam Considered Structural and External Damping

The Proceedings of the Dynamics & Design Conference ◽

10.1299/jsmedmc.2011._423-1_ ◽

2011 ◽

Vol 2011 (0) ◽

pp. _423-1_-_423-10_

Author(s):

Tatsuhito AIHARA ◽

Hiroyuki KUMANO

Keyword(s):

Cantilever Beam ◽

Stability Criterion ◽

Analytical Method ◽

Vibration System

Download Full-text

Vibration of Non-Uniform Beams

Aeronautical Quarterly ◽

10.1017/s0001925900002936 ◽

1963 ◽

Vol 14 (4) ◽

pp. 387-395 ◽

Cited By ~ 29

Author(s):

G. M. Lindberg

Keyword(s):

Cantilever Beam ◽

Stiffness Matrix ◽

Dynamic Stiffness ◽

Dynamic Stiffness Matrix ◽

Uniform Beam ◽

Tapered Cantilever Beam

SummaryA method of deriving a dynamic stiffness matrix for any non-uniform beam is presented. In particular, the case of a linearly tapered cantilever beam is considered, and excellent results are found with the use of only a few elements.

Download Full-text

Exact Vibration Solution for Exponentially Tapered Cantilever With Tip Mass

Journal of Vibration and Acoustics ◽

10.1115/1.4005835 ◽

2012 ◽

Vol 134 (4) ◽

Cited By ~ 16

Author(s):

C.Y. Wang ◽

C. M. Wang

Keyword(s):

Numerical Methods ◽

Free Vibration ◽

Cantilever Beam ◽

Technical Note ◽

Mode Shapes ◽

Constant Thickness ◽

Vibration Frequencies ◽

Tapered Cantilever Beam ◽

Tip Mass ◽

First Time

This technical note is concerned with the free vibration problem of a cantilever beam with constant thickness and exponentially decaying width. Existing analytical results for such a vibration beam problem are found to be incomplete because lower frequencies could not be obtained. Presented herein is the exact characteristic equation for generating the complete vibration frequencies for the considered vibrating beam problem. Also the note treated for the first time such a tapered cantilever beam with a tip mass. The exact solutions (frequencies and mode shapes) are important to engineers designing such tapered beams and the results serve as benchmarks for assessing the validity, convergence and accuracy of numerical methods and solutions.

Download Full-text