Significance of Addressing Persistence of Pathogens and Micropollutants to Enhance Reuse of Treated Sewages Using Constructed Wetlands

2018 ◽  
pp. 355-367
Author(s):  
Rahul S. Sutar ◽  
Vidyanand M. Motghare ◽  
Sharanappa C. Kollur ◽  
Yogen Parikh ◽  
Shyam R. Asolekar
Keyword(s):  
Constructed Wetlands

IDENTIFYING THE MOST SUITABLE AREAS FOR SURFACE FLOW WETLAND CONSTRUCTION IN LITHUANIA

2015 ◽  
Author(s):  
Antanas DUMBRAUSKAS ◽  
Nijolė BASTIENĖ ◽  
Petras PUNYS
Keyword(s):  
Constructed Wetlands ◽  
Ecological Status ◽  
Surface Flow ◽  
Gis Analysis ◽  
Proximity Analysis ◽  
Wetland Construction ◽  
The Mean ◽  
Two Phases ◽  
Terrain Features ◽  
Surface Flow Constructed Wetlands

GIS-based approach to find the suitable sites for surface flow constructed wetlands was employed for the Lithuanian river basins with low ecological status. According to the nature of the analysed criteria the flowchart consists of two phases. Criteria used include hydrographical network, soil properties, terrain features, land use, etc. Some of them have strictly defined values (constraints), and other ranges within certain limits (factors). Limited criteria were analysed using rejection principle and influencing factors using proximity analysis and overlay methods. Selecting the potential sites using standard GIS analysis tools there was estimated about 3286 sites for possible wetlands with the mean area of inflow basin about 4 km2 in the basins of water bodies at risk.

ENERGY PRODUCTION FROM WASTEWATER USING HORIZONTAL AND VERTICAL SUBSURFACE FLOW CONSTRUCTED WETLANDS

2014 ◽  
Vol 13 (10) ◽  
pp. 2517-2523 ◽  
Author(s):  
Jose Villasenor Camacho ◽  
Maria del Carmen Montano Vico ◽  
Manuel Andres ◽  
Rodrigo Rodrigo ◽  
Francisco Jesus Fernandez Morales ◽  
...  
Keyword(s):  
Constructed Wetlands ◽  
Energy Production ◽  
Subsurface Flow ◽  
Subsurface Flow Constructed Wetlands

Field-Scale Studies of Subsurface Flow Constructed Wetlands for Stormwater Quality Enhancement

1997 ◽  
Vol 32 (1) ◽  
pp. 101-118 ◽  
Author(s):  
Q.J. ROCHFORT ◽  
W.E. Watt ◽  
J. Marsalek ◽  
B.C. Anderson ◽  
A.A. Crowder
Keyword(s):  
Organic Carbon ◽  
Constructed Wetlands ◽  
Suspended Solids ◽  
Nutrient Loading ◽  
Subsurface Flow ◽  
Reaction Rates ◽  
Pollutant Removal ◽  
Order Kinetic ◽  
Dissolved Metals ◽  
Subsurface Flow Constructed Wetlands

Abstract Two subsurface flow constructed wetlands were tested for pollutant removal performance in conjunction with an on-line stormwater detention pond, in Kingston Township, Ontario. The 4.9 m2 wetland cells were filled with 9 mm limestone gravel, and planted with cattail, common reed and spike rush. Changes in nutrient (total organic carbon, PO43- and NH4+), suspended solids and metal (Cu, Pb, Zn) concentrations were used to assess performance. Contaminant removal occurred through a combination of physical, chemical and biological means. As with any biological system, variation in performance of stormwater wetlands can be expected to occur as a result of fluctuations in contaminant loading, contact time and ambient environmental conditions. Storm pond effluent was delivered in continuous flow through the wetlands (during baseflow and event conditions), with a detention time of 1 to 3 days. The wetlands were able to maintain removal rates of up to 39% for orthophosphate even during the more severe conditions of fall dieback. Average removal of suspended solids (46%) and dissolved metals (Cu 50%) remained similar throughout all tests. Organic carbon was reduced by less than 10% during these tests. Low nutrient levels in the pond effluent were supplemented by spiking with sources of carbon, nitrogen and phosphorus during pulsed loading conditions. Daily sampling produced a time series, which illustrated the rates of decline in concentration of nutrients. First order kinetic assimilation rates ranged from 1.7 d-1 for NH4002B to 0.12 d-1 for organic carbon, which were noticeably lower when compared with municipal and industrial wastewater treatment rates. Three methods of sizing stormwater wetlands (impervious surface area, volumetric load and kinetic reaction rates) were compared using the same design storm and data from this study. From this comparison it was seen that the kinetic sizing approach proved to be the most versatile, and allowed for adaptation to northern climatic conditions and anticipated nutrient loading.

Enhancement of nitrogen removal in subsurface flow constructed wetlands employing a 2-stage configuration, an unsaturated zone, and recirculation

1995 ◽  
Vol 32 (3) ◽  
pp. 59-67 ◽  
Author(s):  
Kevin D. White
Keyword(s):  
Constructed Wetlands ◽  
Nitrogen Removal ◽  
Constructed Wetland ◽  
Subsurface Flow ◽  
Great Promise ◽  
Effluent Recirculation ◽  
Wetland Treatment ◽  
Subsurface Flow Constructed Wetlands ◽  
Inlet Zone ◽  
Bod Removal

Constructed wetland technology is currently evolving into an acceptable, economically competitive alternative for many wastewater treatment applications. Although showing great promise for removing carbonaceous materials from wastewater, wetland systems have not been as successful at nitrification. This is primarily due to oxygen limitations. Nitrification does occur in conventional wetland treatment systems, but typically requires long hydraulic retention times. This paper describes a study that first evaluated the capability of subsurface flow constructed wetlands to treat a high strength seafood processor wastewater and then evaluated passive aeration configurations and effluent recirculation with respect to nitrogen treatment efficiency. The first stage of a 2-stage wetland treatment system exhibited a relatively short hydraulic retention time and was designed for BOD removal only. The second stage wetland employed an unsaturated inlet zone and effluent recirculation to enhance nitrification. Results indicate that organic loading, and thus BOD removal, in the first stage wetland is key to optimal nitrification. Passive aeration through an unsaturated inlet zone and recirculation achieved up to 65-70 per cent ammonia nitrogen removal at hydraulic retention times of about 3.5 days. Inlet zone configuration and effluent recirculation is shown to enhance the nitrogen removal capability of constructed wetland treatment systems.

Using Decomposition Kinetics to Model the Removal of Mine Water Pollutants in Constructed Wetlands

1994 ◽  
Vol 29 (4) ◽  
pp. 219-226 ◽  
Author(s):  
William J. Tarutis ◽  
Richard F. Unz
Keyword(s):  
Organic Matter ◽  
Constructed Wetlands ◽  
Mine Drainage ◽  
Term Treatment ◽  
Decomposition Kinetics ◽  
Dry Density ◽  
Organic Matter Concentration ◽  
Long Term Treatment ◽  
Input Variables ◽  
Reaction Stoichiometry

Although numerous mathematical models have been used to describe decomposition, few, if any, have been used to model the removal of pollutants in constructed wetlands. A steady-state model based on decomposition kinetics and reaction stoichiometry has been developed which simulates the removal of ferrous iron entering wetlands constructed for mine drainage treatment. Input variables for the model include organic matter concentration, reaction rate coefficient, porosity and dry density, and hydraulic detention time. Application of the model assumes complete anaerobic conditions within the entire substrate profile, constant temperature, no additional organic matter input, and subsurface flow only. For these ideal conditions, model simulations indicate that wetlands constructed with readily decomposable substrates rich in organic carbon are initially capable of removing far greater amounts of iron than wetlands built with less biodegradable substrates. However, after three to five years of operation this difference becomes negligible. For acceptable long-term treatment performance, therefore, periodic additions of decomposable organic matter will be required.

Evaluation of Small Wastewater Treatment Plants in the County of Århus – Denmark

1993 ◽  
Vol 28 (10) ◽  
pp. 33-41
Author(s):  
Jes la Cour Jansen ◽  
Bodil Mose Pedersen ◽  
Erik Moldt
Keyword(s):  
Wastewater Treatment ◽  
Constructed Wetlands ◽  
Biological Treatment ◽  
Wastewater Treatment Plants ◽  
Chemical Precipitation ◽  
Common Type ◽  
Treatment Efficiency ◽  
Effluent Quality ◽  
Different Types

Influent and effluent data from about 120 small wastewater treatment plants (100 - 2000 PE) have been collected and processed. Seven different types of plants are represented. The effluent quality and the treatment efficiency have been evaluated. The most common type of plant is mechanical/biological treatment plants. Some of them are nitrifying and some are also extended for chemical precipitation of phosphorus. Constructed wetlands and biological sandfilters are also represented among the small wastewater treatment plants.

Sign in / Sign up

Export Citation Format

Share Document