Observational Method

Author(s):  
Tomokazu Murakami
Keyword(s):  
Landslides ◽  
2021 ◽  
Author(s):  
Lorenzo Brezzi ◽  
Alberto Bisson ◽  
Davide Pasa ◽  
Simonetta Cola

AbstractA large number of landslides occur in North-Eastern Italy during every rainy period due to the particular hydrogeological conditions of this area. Even if there are no casualties, the economic losses are often significant, and municipalities frequently do not have sufficient financial resources to repair the damage and stabilize all the unstable slopes. In this regard, the research for more economically sustainable solutions is a crucial challenge. Floating composite anchors are an innovative and low-cost technique set up for slope stabilization: it consists in the use of passive sub-horizontal reinforcements, obtained by coupling a traditional self-drilling bar with some tendons cemented inside it. This work concerns the application of this technique according to the observational method described within the Italian and European technical codes and mainly recommended for the design of geotechnical works, especially when performed in highly uncertain site conditions. The observational method prescribes designing an intervention and, at the same time, using a monitoring system in order to correct and adapt the project during realization of the works on the basis of new data acquired while on site. The case study is the landslide of Cischele, a medium landslide which occurred in 2010 after an exceptional heavy rainy period. In 2015, some floating composite anchors were installed to slow down the movement, even if, due to a limited budget, they were not enough to ensure the complete stabilization of the slope. Thanks to a monitoring system installed in the meantime, it is now possible to have a comparison between the site conditions before and after the intervention. This allows the evaluation of benefits achieved with the reinforcements and, at the same time, the assessment of additional improvements. Two stabilization scenarios are studied through an FE model: the first includes the stabilization system built in 2015, while the second evaluates a new solution proposed to further increase the slope stability.


Author(s):  
Hoe-Chian Yeow ◽  
Duncan Nicholson ◽  
Chui-Loung Man ◽  
Alistair Ringer ◽  
Paul Glass ◽  
...  
Keyword(s):  

1998 ◽  
Vol 35 (1) ◽  
pp. 81-95 ◽  
Author(s):  
D W Sargent ◽  
R D Beckie ◽  
G Smith

This paper reviews the process used to design the construction dewatering system at the Influent Pumping Station at Annacis Island Wastewater Treatment Plant. The design process followed the "observational method," as applied to soil mechanics by K. Terzaghi and set out by R.B. Peck in the Ninth Rankine Lecture. The design was based on a working hypothesis of behaviour anticipated under the most probable conditions identified in the data gathering and assessment program. The sensitivity of the design was evaluated by considering potentially unfavourable conditions evident in the available data. The design development included a review of monitoring feedback obtained during the pumping-well installation, a pumping test, and the dewatering system start-up. The monitoring program and review process are presented.Key words: dewatering, observational method, case study, pumping test.


2017 ◽  
Vol 2 (1) ◽  
pp. 39
Author(s):  
Rahmi Nurhaini ◽  
Arief Affandi

Iron (Fe) is one of many heavy metals that is corrosive resistant, dense, and has a low melting point. If accumulated in the body, the metal can cause some medical conditions, such as irritation to skin and eyes, breathing problems, and in the long term, cancer. This research aims to know generally the spread of metallic iron (Fe) in the river Pasar in Belangwetan, Klaten. This study was conducted using an observational method in which researchers did not examine the effects of interventions. Sampling was done using purposive sampling method taken from three points, namely the upper, middle, lower. Determination of iron levels by Atomic Absorption Spectrophotometer (AAS) obtained a positive result, and the data was processed using SPSS to determine the Mean and Standard Deviation. Of the research result, it could be known the Mean score was 2.33 ppm and SD was 0.0352. The result of this research indicated that the levels of iron in the river Pasar in Belangwetan were 2.33 ppm. It means that the levels violate the regulation of the Minister of Health of the Republic of Indonesia, which is not more than 1mg/L (1ppm) in the clean water


Author(s):  
J Spross ◽  
F Johansson ◽  
H Stille ◽  
S Larsson
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document