Morphology and mechanical properties of ultra-high molecular weight polyethylene-poly(tetrafluoroethylene) blend films

1995 ◽  
Vol 273 (7) ◽  
pp. 633-641 ◽  
Author(s):  
Y. Sugiura ◽  
Y. Makimura ◽  
Y. Kita ◽  
M. Matsuo
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Blend Films ◽  
Ultra High Molecular Weight ◽  
Morphology And Mechanical Properties

scholarly journals Melt- vs. Non-Melt Blending of Complexly Processable Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposite

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 404
Author(s):  
Nur Sharmila Sharip ◽  
Hidayah Ariffin ◽  
Tengku Arisyah Tengku Yasim-Anuar ◽  
Yoshito Andou ◽  
Yuki Shirosaki ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Tensile Strength ◽  
Yield Strength ◽  
Young’S Modulus ◽  
High Molecular Weight ◽  
Melt Processing ◽  
Cellulose Nanofiber ◽  
Melt Blending ◽  
Ultra High Molecular Weight

The major hurdle in melt-processing of ultra-high molecular weight polyethylene (UHMWPE) nanocomposite lies on the high melt viscosity of the UHMWPE, which may contribute to poor dispersion and distribution of the nanofiller. In this study, UHMWPE/cellulose nanofiber (UHMWPE/CNF) bionanocomposites were prepared by two different blending methods: (i) melt blending at 150 °C in a triple screw kneading extruder, and (ii) non-melt blending by ethanol mixing at room temperature. Results showed that melt-processing of UHMWPE without CNF (MB-UHMWPE/0) exhibited an increment in yield strength and Young’s modulus by 15% and 25%, respectively, compared to the Neat-UHMWPE. Tensile strength was however reduced by almost half. Ethanol mixed sample without CNF (EM-UHMWPE/0) on the other hand showed slight decrement in all mechanical properties tested. At 0.5% CNF inclusion, the mechanical properties of melt-blended bionanocomposites (MB-UHMWPE/0.5) were improved as compared to Neat-UHMWPE. It was also found that the yield strength, elongation at break, Young’s modulus, toughness and crystallinity of MB-UHMWPE/0.5 were higher by 28%, 61%, 47%, 45% and 11%, respectively, as compared to the ethanol mixing sample (EM-UHMWPE/0.5). Despite the reduction in tensile strength of MB-UHMWPE/0.5, the value i.e., 28.4 ± 1.0 MPa surpassed the minimum requirement of standard specification for fabricated UHMWPE in surgical implant application. Overall, melt-blending processing is more suitable for the preparation of UHMWPE/CNF bionanocomposites as exhibited by their characteristics presented herein. A better mechanical interlocking between UHMWPE and CNF at high temperature mixing with kneading was evident through FE-SEM observation, explains the higher mechanical properties of MB-UHMWPE/0.5 as compared to EM-UHMWPE/0.5.

Effect of N2 Ion Bombardment on Optical and Mechanical Properties of Ultra-High Molecular Weight Polyethylene (UHMWPE)

2013 ◽  
Vol 341 ◽  
pp. 169-180 ◽  
Author(s):  
A.M. Abdul-Kader ◽  
Y.A. El-Gendy ◽  
Awad A. Al-Rashdi ◽  
A.M. Salem
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Ion Beam ◽  
Surface Hardness ◽  
Conjugation Length ◽  
High Fluences ◽  
Pristine Sample ◽  
Optical And Mechanical Properties ◽  
Ultra High Molecular Weight

The effect of ion beam bombardment on the optical and mechanical properties of ultra-high molecular weight polyethylene (UHMWPE) was investigated. UHMWPE polymer samples were bombarded with 150 keV N2ions under vacuum at room temperature to high fluences ranging from 1x1016to 2x1017ions cm-2. The untreated as well as treated samples were investigated by ultraviolet-visible (UV-Vis) spectrophotometer and Vickers micro-hardness techniques. The direct and indirect optical band gap decreased from 2.9 and 1.65 eV for pristine sample to 1.7 and 1 eV for those bombarded with N2ion beam at the highest fluence, respectively. With increasing ion fluence, an increase in the number of carbon atoms per conjugation length, N and number of carbon atoms per cluster, M in a formed cluster were observed. A significant improvement in surface hardness was obtained by increasing the ion fluence.

Effect of nitrogen ion irradiation on the nano-tribological and surface mechanical properties of ultra-high molecular weight polyethylene

2010 ◽  
Vol 204 (23) ◽  
pp. 3887-3894 ◽  
Author(s):  
Laura Fasce ◽  
Josefina Cura ◽  
Mariela del Grosso ◽  
Gerardo García Bermúdez ◽  
Patricia Frontini
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Ion Irradiation ◽  
Nitrogen Ion ◽  
Ultra High Molecular Weight
Sign in / Sign up

Export Citation Format

Share Document