The effect of the polarity of the dispersion medium on the structure and properties of plastic lubricants

The method for evaluating the adsorption capacity of surfactants for plastic lubricants on inorganic thickener, such as silica gel, bentonite, carbon black, colloidal graphite, and others was proposed. The Gibbs adsorption values were calculated based on surface tension curves of samples in oil media, and the adsorption isotherms for each of the media were plotted based on the calculated data. According to the results of the study of the surface tension and refractive index of DF-11 additive solutions in heptane, it was found that 1% of the mass goes to fill the butosil surface, and the rest of its amount remains in the volume. But for the A-22 additive in the reference medium, the filling of the butosil surface occurs at a concentration of 2 % mass. It is shown that the additive A-22 should be used at higher concentrations than DF-11 to improve tribological parameters of silica gel lubricants. It was found that use of butasil based silica-gel grease the mixture of the industrial oil I-40A and PMS-400 as a dispersion medium, allows to reduce concentration of DF-11 and A-22 additives.

Download Full-text

THE PRODUCTION OF PLASTIC LUBRICANTS BASED ON REGENERATED SYNTHETIC MOTOR OILS USED IN UZBEKISTAN

CHEMISTRY AND CHEMICAL ENGINEERING ◽

10.51348/cce202147 ◽

2021 ◽

pp. 39-43

Keyword(s):

Dispersion Medium ◽

Strength Properties ◽

Engine Oils ◽

Base Oils ◽

Synthetic Motor ◽

Basic Characteristics ◽

Plastic Lubricants ◽

Motor Oils

The purpose of the study is to increase the efficiency of using used engine oils as a dispersion medium for plastic lubricants. It has been established that the removal of resins, carbenes, carbides and asphaltenes from used synthetic motor oils makes it possible to obtain an oil base close to commercial base oils in terms of basic characteristics; refined oils also have a high margin of operational properties. The composition of lubricants for analogues of Lithol-24 and Solidol-Z based on refined used engine oils has been determined. Anticorrosive, adhesive and strength properties of lubricant compositions are considered.

Download Full-text

Effect of oxidation of dispersion medium on structure and properties of lithium greases

Chemistry and Technology of Fuels and Oils ◽

10.1007/bf00730579 ◽

1981 ◽

Vol 17 (4) ◽

pp. 181-184

Author(s):

I. G. Fuks ◽

S. B. Shibryaev ◽

V. P. Tikhonov ◽

G. I. Fuks ◽

N. D. Kirilyuk

Keyword(s):

Dispersion Medium ◽

Structure And Properties

Download Full-text

Structure of second phases in TiAl alloys containing Cr and B

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100087197 ◽

1991 ◽

Vol 49 ◽

pp. 576-577

Author(s):

Ernest L. Hall ◽

Shyh-Chin Huang

Keyword(s):

Grain Size ◽

Second Phase ◽

Structure And Properties ◽

Tial Alloys ◽

Second Phases ◽

Interstitial Elements

Addition of interstitial elements to γ-TiAl alloys is currently being explored as a method for improving the properties of these alloys. Previous work in which a number of interstitial elements were studied showed that boron was particularly effective in refining the grain size in castings, and led to enhanced strength while maintaining reasonable ductility. Other investigators have shown that B in γ-TiAl alloys tends to promote the formation of TiB2 as a second phase. In this study, the microstructure of Bcontaining TiAl alloys was examined in detail in order to describe the mechanism by which B alters the structure and properties of these alloys.

Download Full-text

Relationships between hierarchical structure and properties in macromolecular systems

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100126950 ◽

1987 ◽

Vol 45 ◽

pp. 440-443

Author(s):

E. Baer

Keyword(s):

Uniaxial Tension ◽

Hierarchical Structure ◽

Inorganic Material ◽

Hierarchical Structures ◽

Bone Collagen ◽

Structure And Properties ◽

Connective Tissues ◽

Scale Level ◽

Fibrous Protein ◽

Macromolecular Systems

The most advanced macromolecular materials are found in plants and animals, and certainly the connective tissues in mammals are amongst the most advanced macromolecular composites known to mankind. The efficient use of collagen, a fibrous protein, in the design of both soft and hard connective tissues is worthy of comment. Very crudely, in bone collagen serves as a highly efficient binder for the inorganic hydroxyappatite which stiffens the structure. The interactions between the organic fiber of collagen and the inorganic material seem to occur at the nano (scale) level of organization. Epitatic crystallization of the inorganic phase on the fibers has been reported to give a highly anisotropic, stress responsive, structure. Soft connective tissues also have sophisticated oriented hierarchical structures. The collagen fibers are “glued” together by a highly hydrated gel-like proteoglycan matrix. One of the simplest structures of this type is tendon which functions primarily in uniaxial tension as a reinforced elastomeric cable between muscle and bone.

Download Full-text

The Structure and Properties of MoSi2 Thin Film in Mos Process

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s1431927600001379 ◽

1980 ◽

Vol 38 ◽

pp. 326-327

Author(s):

C.K. Wu ◽

P. Chang ◽

N. Godinho

Keyword(s):

Thin Film ◽

Integrated Circuits ◽

High Performance ◽

Large Scale ◽

Process Development ◽

Structure And Properties ◽

Metal Silicides ◽

High Oxidation ◽

Important Approach ◽

High Oxidation Resistance

Recently, the use of refractory metal silicides as low resistivity, high temperature and high oxidation resistance gate materials in large scale integrated circuits (LSI) has become an important approach in advanced MOS process development (1). This research is a systematic study on the structure and properties of molybdenum silicide thin film and its applicability to high performance LSI fabrication.

Download Full-text