Comparison of the evaluation of measurement errors by their entropy, root-mean-square, and boundary values

1966 ◽  
Vol 9 (9) ◽  
pp. 1130-1135 ◽  
Author(s):  
P. V. Novitskii ◽  
I. A. Nazarov ◽  
V. Ya. Ivanova ◽  
G. A. Kondrashova
Keyword(s):  
Root Mean Square ◽  
Measurement Errors ◽  
Mean Square ◽  
Boundary Values

New method for rapid determination of crystal orientation via Kikuchi patterns

1995 ◽  
Vol 10 (12) ◽  
pp. 3026-3036
Author(s):  
G.P.E.M. Van Bakel ◽  
D.N. Seidman
Keyword(s):  
Electron Microscopy ◽  
Root Mean Square ◽  
Measurement Errors ◽  
Rapid Determination ◽  
New Method ◽  
Complete Analysis ◽  
Mean Square ◽  
Crystal Orientations ◽  
Diffraction Patterns ◽  
Projection Center

Kikuchi electron diffraction patterns are used extensively to determine crystal orientations via transmission electron microscopy (TEM) or in the electron backscattering pattern (EBSP) mode of scanning electron microscopy (SEM). A new method is presented that is capable of finding crystal orientations, the camera length, and the projection center from only one pattern per grain using a least-squares technique. This method eliminates the need to perform an alignment with a reference crystal in the backscattering mode. Application to a Σ = 13a silicon bicrystal is presented for TEM patterns and EBSP's. A complete analysis of the propagation of random measurement errors into the disorientation axis/angle pair is carried out. The root mean square deviation from the nominal disorientation angle is found to be 0.3°in the case of TEM and 0.5°in the case of EBSP. The root mean square inclination between the nominal and measured disorientation axis is found to be 1°in the case of TEM and 0.5°in the case of EBSP.

The Relationship of Root Mean Square Value of Electromyography and Isometric Torque of Quadriceps in Normal Subjects

2016 ◽  
Vol 26 (1) ◽  
pp. 58
Author(s):  
Qiurong XIE ◽  
Zheng JIANG ◽  
Qinglu LUO ◽  
Jie LIANG ◽  
Xiaoling WANG ◽  
...  
Keyword(s):  
Root Mean Square ◽  
Normal Subjects ◽  
Mean Square ◽  
Isometric Torque ◽  
Relationship Of ◽  
The Relationship

Limit tolerances for sums of measurement errors

2018 ◽  
Vol 934 (4) ◽  
pp. 59-62
Author(s):  
V.I. Salnikov
Keyword(s):  
Normal Distribution ◽  
Mean Square Error ◽  
Gaussian Distribution ◽  
Measurement Errors ◽  
Theory And Practice ◽  
Mean Square ◽  
The Mean ◽  
Limiting Values ◽  
Limiting Value

The question of calculating the limiting values of residuals in geodesic constructions is considered in the case when the limiting value for measurement errors is assumed equal to 3m, ie ∆рred = 3m, where m is the mean square error of the measurement. Larger errors are rejected. At present, the limiting value for the residual is calculated by the formula 3m√n, where n is the number of measurements. The article draws attention to two contradictions between theory and practice arising from the use of this formula. First, the formula is derived from the classical law of the normal Gaussian distribution, and it is applied to the truncated law of the normal distribution. And, secondly, as shown in [1], when ∆рred = 2m, the sums of errors naturally take the value equal to ?pred, after which the number of errors in the sum starts anew. This article establishes its validity for ∆рred = 3m. A table of comparative values of the tolerances valid and recommended for more stringent ones is given. The article gives a graph of applied and recommended tolerances for ∆рred = 3m.

scholarly journals Estimation of Apple Flowering Frost Loss for Fruit Yield Based on Gridded Meteorological and Remote Sensing Data in Luochuan, Shaanxi Province, China

2021 ◽  
Vol 13 (9) ◽  
pp. 1630
Author(s):  
Yaohui Zhu ◽  
Guijun Yang ◽  
Hao Yang ◽  
Fa Zhao ◽  
Shaoyu Han ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Minimum Temperature ◽  
Price Regulation ◽  
Flowering Period ◽  
Mean Square ◽  
Prevention Measures ◽  
Agricultural Insurance

With the increase in the frequency of extreme weather events in recent years, apple growing areas in the Loess Plateau frequently encounter frost during flowering. Accurately assessing the frost loss in orchards during the flowering period is of great significance for optimizing disaster prevention measures, market apple price regulation, agricultural insurance, and government subsidy programs. The previous research on orchard frost disasters is mainly focused on early risk warning. Therefore, to effectively quantify orchard frost loss, this paper proposes a frost loss assessment model constructed using meteorological and remote sensing information and applies this model to the regional-scale assessment of orchard fruit loss after frost. As an example, this article examines a frost event that occurred during the apple flowering period in Luochuan County, Northwestern China, on 17 April 2020. A multivariable linear regression (MLR) model was constructed based on the orchard planting years, the number of flowering days, and the chill accumulation before frost, as well as the minimum temperature and daily temperature difference on the day of frost. Then, the model simulation accuracy was verified using the leave-one-out cross-validation (LOOCV) method, and the coefficient of determination (R2), the root mean square error (RMSE), and the normalized root mean square error (NRMSE) were 0.69, 18.76%, and 18.76%, respectively. Additionally, the extended Fourier amplitude sensitivity test (EFAST) method was used for the sensitivity analysis of the model parameters. The results show that the simulated apple orchard fruit number reduction ratio is highly sensitive to the minimum temperature on the day of frost, and the chill accumulation and planting years before the frost, with sensitivity values of ≥0.74, ≥0.25, and ≥0.15, respectively. This research can not only assist governments in optimizing traditional orchard frost prevention measures and market price regulation but can also provide a reference for agricultural insurance companies to formulate plans for compensation after frost.

scholarly journals Histamine Control in Raw and Processed Tuna: A Rapid Tool Based on NIR Spectroscopy

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 885
Author(s):  
Sergio Ghidini ◽  
Luca Maria Chiesa ◽  
Sara Panseri ◽  
Maria Olga Varrà ◽  
Adriana Ianieri ◽  
...  
Keyword(s):  
Root Mean Square ◽  
Near Infrared ◽  
Nir Spectroscopy ◽  
Partial Least Square ◽  
Least Square ◽  
Partial Least Square Regression ◽  
Coefficient Of Determination ◽  
Mean Square ◽  
Tuna Fish ◽  
Mean Square Errors

The present study was designed to investigate whether near infrared (NIR) spectroscopy with minimal sample processing could be a suitable technique to rapidly measure histamine levels in raw and processed tuna fish. Calibration models based on orthogonal partial least square regression (OPLSR) were built to predict histamine in the range 10–1000 mg kg−1 using the 1000–2500 nm NIR spectra of artificially-contaminated fish. The two models were then validated using a new set of naturally contaminated samples in which histamine content was determined by conventional high-performance liquid chromatography (HPLC) analysis. As for calibration results, coefficient of determination (r2) > 0.98, root mean square of estimation (RMSEE) ≤ 5 mg kg−1 and root mean square of cross-validation (RMSECV) ≤ 6 mg kg−1 were achieved. Both models were optimal also in the validation stage, showing r2 values > 0.97, root mean square errors of prediction (RMSEP) ≤ 10 mg kg−1 and relative range error (RER) ≥ 25, with better results showed by the model for processed fish. The promising results achieved suggest NIR spectroscopy as an implemental analytical solution in fish industries and markets to effectively determine histamine amounts.

Intersession reliability of GPS-based and accelerometer-based physical variables in small-sided games with and without the offside rule

2021 ◽  
pp. 175433712098764
Author(s):  
Igor Junio de Oliveira Custódio ◽  
Gibson Moreira Praça ◽  
Leandro Vinhas de Paula ◽  
Sarah da Glória Teles Bredt ◽  
Fabio Yuzo Nakamura ◽  
...  
Keyword(s):  
Root Mean Square ◽  
Global Positioning System ◽  
Intraclass Correlation ◽  
Correlation Coefficients ◽  
Mean Square ◽  
Physical Demands ◽  
Intraclass Correlation Coefficients ◽  
Total Distance ◽  
Global Positioning ◽  
High Level

This study aimed to analyze the intersession reliability of global positioning system (GPS-based) distances and accelerometer-based (acceleration) variables in small-sided soccer games (SSG) with and without the offside rule, as well as compare variables between the tasks. Twenty-four high-level U-17 soccer athletes played 3 versus 3 (plus goalkeepers) SSG in two formats (with and without the offside rule). SSG were performed on eight consecutive weeks (4 weeks for each group), twice a week. The physical demands were recorded using a GPS with an embedded triaxial accelerometer. GPS-based variables (total distance, average speed, and distances covered at different speeds) and accelerometer-based variables (Player Load™, root mean square of the acceleration recorded in each movement axis, and the root mean square of resultant acceleration) were calculated. Results showed that the inclusion of the offside rule reduced the total distance covered (large effect) and the distances covered at moderate speed zones (7–12.9 km/h – moderate effect; 13–17.9 km/h – large effect). In both SSG formats, GPS-based variables presented good to excellent reliability (intraclass correlation coefficients – ICC > 0.62) and accelerometer-based variables presented excellent reliability (ICC values > 0.89). Based on the results of this study, the offside rule decreases the physical demand of 3 versus 3 SSG and the physical demands required in these SSG present high intersession reliability.

scholarly journals GNINA 1.0: molecular docking with deep learning

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Andrew T. McNutt ◽  
Paul Francoeur ◽  
Rishal Aggarwal ◽  
Tomohide Masuda ◽  
Rocco Meli ◽  
...  
Keyword(s):  
Molecular Docking ◽  
Root Mean Square ◽  
Root Mean Square Deviation ◽  
Computational Cost ◽  
Scoring Function ◽  
Binding Pocket ◽  
Protein Docking ◽  
Mean Square ◽  
Mean Square Deviation ◽  
Autodock Vina

AbstractMolecular docking computationally predicts the conformation of a small molecule when binding to a receptor. Scoring functions are a vital piece of any molecular docking pipeline as they determine the fitness of sampled poses. Here we describe and evaluate the 1.0 release of the Gnina docking software, which utilizes an ensemble of convolutional neural networks (CNNs) as a scoring function. We also explore an array of parameter values for Gnina 1.0 to optimize docking performance and computational cost. Docking performance, as evaluated by the percentage of targets where the top pose is better than 2Å root mean square deviation (Top1), is compared to AutoDock Vina scoring when utilizing explicitly defined binding pockets or whole protein docking. Gnina, utilizing a CNN scoring function to rescore the output poses, outperforms AutoDock Vina scoring on redocking and cross-docking tasks when the binding pocket is defined (Top1 increases from 58% to 73% and from 27% to 37%, respectively) and when the whole protein defines the binding pocket (Top1 increases from 31% to 38% and from 12% to 16%, respectively). The derived ensemble of CNNs generalizes to unseen proteins and ligands and produces scores that correlate well with the root mean square deviation to the known binding pose. We provide the 1.0 version of Gnina under an open source license for use as a molecular docking tool at https://github.com/gnina/gnina.

Sign in / Sign up

Export Citation Format

Share Document