Faceted fatigue fracture and its relation to the crystallographic slip systems in Cu-16 at. Pct al single crystals

1991 ◽  
Vol 22 (2) ◽  
pp. 415-425 ◽  
Author(s):  
Sun Ig Hong ◽  
Campbell Laird
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhenghao Chen ◽  
Bhaskar Paul ◽  
Sanjib Majumdar ◽  
Norihiko L. Okamoto ◽  
Kyosuke Kishida ◽  
...  

AbstractThe plastic deformation behavior of single crystals of two transition-metal diborides, ZrB2 and TiB2 with the AlB2 structure has been investigated at room temperature as a function of crystal orientation and specimen size by micropillar compression tests. Although plastic flow is not observed at all for their bulk single crystals at room temperature, plastic flow is successfully observed at room temperature by the operation of slip on {1$${\bar{1}}$$ 1 ¯ 00}<11$${\bar{2}}$$ 2 ¯ 3> in ZrB2 and by the operation of slip on {1$${\bar{1}}$$ 1 ¯ 00}<0001> and {1$${\bar{1}}$$ 1 ¯ 00}<11$${\bar{2}}$$ 2 ¯ 0> in TiB2. Critical resolve shear stress values at room temperature are very high, exceeding 1 GPa for all observed slip systems; 3.01 GPa for {1$${\bar{1}}$$ 1 ¯ 00}<11$${\bar{2}}$$ 2 ¯ 3> slip in ZrB2 and 1.72 GPa and 5.17 GPa, respectively for {1$${\bar{1}}$$ 1 ¯ 00}<0001> and {1$${\bar{1}}$$ 1 ¯ 00}<11$${\bar{2}}$$ 2 ¯ 0> slip in TiB2. The identified operative slip systems and their CRSS values are discussed in comparison with those identified in the corresponding bulk single crystals at high temperatures and those inferred from micro-hardness anisotropy in the early studies.


2007 ◽  
Vol 340-341 ◽  
pp. 671-676
Author(s):  
Shao Rui Zhang ◽  
Da Yong Li ◽  
Zhong Wei Yin ◽  
Ying Hong Peng ◽  
Fei Zhou

It has long been found that the crystal orientations would induce macroscopic anisotropy during deformation process, and then affect the deformation properties of sheet metal. So it is very important to find the true relation between texture distribution and macroscopic anisotropy. In this paper, the anisotropy coefficients of the yield function are fitted by Taylor factor and crystal plastic model. Metal flow is assumed to occur by crystallographic slip on given slip systems within each crystal. Then this simulation results are compared with those of microscopic crystal plastic method.


1963 ◽  
Vol 11 (10) ◽  
pp. 1190-1191 ◽  
Author(s):  
B. Šesták ◽  
S. Libovický

1982 ◽  
Vol 17 (3) ◽  
pp. 878-884 ◽  
Author(s):  
H. Garem ◽  
J. Rabier ◽  
P. Veyssiere

1996 ◽  
Vol 460 ◽  
Author(s):  
M. Moriwaki ◽  
K. Ito ◽  
H. Inui ◽  
M. Yamaguchi

ABSTRACTThe deformation behavior of single crystals of Mo(Si,Al)2 with the C40 structure has been studied as a function of crystal orientation and Al content in the temperature range from room temperature to 1500°C in compression. Plastic flow is possible only above 1100°C for orientations where slip along <1120> on (0001) is operative and no other slip systems are observed over whole temperature range investigated. The critical resolved shear stress for basal slip decreases rapidly with increasing temperature and the Schmid law is valid. Basal slip appears to occur through a synchroshear mechanism, in which a-dislocations (b=1/3<1120>) dissociate into two synchro-partial dislocations with the identical Burgers vector(b*1/6<1120>) and each synchro-partial further dissociates into two partials on two adjacent planes.


Sign in / Sign up

Export Citation Format

Share Document