A mathematical model for gravity-induced distortion during liquid-phase sintering

1995 ◽  
Vol 26 (3) ◽  
pp. 653-659 ◽  
Author(s):  
R. Raman ◽  
Randall M. German
Keyword(s):  
Mathematical Model ◽  
Liquid Phase ◽  
Liquid Phase Sintering

scholarly journals Interpretation of Frenkel’s theory of sintering considering evolution of activated pores: III. Determination of equilibrium sintering time

2015 ◽  
Vol 47 (2) ◽  
pp. 215-219
Author(s):  
C.L. Yu ◽  
D.P. Gao ◽  
F. Wang ◽  
R.J. Huo ◽  
X.M. Hao ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Liquid Phase ◽  
Liquid Phase Sintering ◽  
Experimental Results ◽  
Equilibrium Time ◽  
Sintering Time ◽  
Good Accordance ◽  
Cordierite Glass ◽  
The Mathematical Model

In this article, the Frenkel?s theory of liquid-phase sintering was interpreted regarding pores as the activated volume. The mathematical model established by Nikolic et al. was used to infer the equilibrium sintering time at varied sintering temperatures during the isothermal sintering of codierite glass by Giess et al. Through the calculation, the equilibrium time at 800?C, 820?C, 840?C and 860?C is inferred to be 7014.42mins, 1569.65mins, 368.92mins and 114.61mins, respectively. The equilibrium time decreases as the temperature increases. And the theoretical value is in good accordance with the experimental results. Thus, the model established by Nikolic et al. can be applied successfully to predict the equilibrium sintering time of the cordierite glass at varied temperatures during isothermal sintering.

Effect of furnace atmosphere and silica content on the consolidation behaviour of magnesia partially stabilised zirconia

1990 ◽  
Vol 48 (4) ◽  
pp. 1056-1057
Author(s):  
J. Drennan ◽  
R.H.J. Hannink ◽  
D.R. Clarke ◽  
T.M. Shaw
Keyword(s):  
Liquid Phase ◽  
Silica Content ◽  
Liquid Phase Sintering ◽  
Furnace Atmosphere ◽  
Boundary Phase ◽  
Analytical Electron ◽  
Analytical Electron Microscope ◽  
Series Of Experiments ◽  
Compositional Gradients ◽  
Mobile Liquid

Magnesia partially stabilised zirconia (Mg-PSZ) ceramics are renowned for their excellent nechanical properties. These are effected by processing conditions and purity of starting materials. It has been previously shown that small additions of strontia (SrO) have the effect of removing the major contaminant, silica (SiO2).The mechanism by which this occurs is not fully understood but the strontia appears to form a very mobile liquid phase at the grain boundaries. As the sintering reaches the final stages the liquid phase is expelled to the surface of the ceramic. A series of experiments, to examine the behaviour of the liquid grain boundary phase, were designed to produce compositional gradients across the ceramic bodies. To achieve this, changes in both silica content and furnace atmosphere were implemented. Analytical electron microscope techniques were used to monitor the form and composition of the phases developed. This paper describes the results of our investigation and the presentation will discuss the work with reference to liquid phase sintering of ceramics in general.

Microstructure and microanalysis of sintered Fe-Nd-B permanent magnets

1990 ◽  
Vol 48 (4) ◽  
pp. 990-991
Author(s):  
Mahesh Chandramouli
Keyword(s):  
Electron Microscope ◽  
Liquid Phase ◽  
Permanent Magnets ◽  
Phase Distribution ◽  
Energy Dispersive Spectrometer ◽  
Nucleation And Growth ◽  
Liquid Phase Sintering ◽  
Domain Wall Energy ◽  
Oxide Phases ◽  
Scanning Electron

Magnetization reversal in sintered Fe-Nd-B, a complex, multiphase material, occurs by nucleation and growth of reverse domains making the isolation of the ferromagnetic Fe14Nd2B grains by other nonmagnetic phases crucial. The magnets used in this study were slightly rich in Nd (in comparison to Fe14Nd2B) to promote the formation of Nd-oxides at multigrain junctions and incorporated Dy80Al20 as a liquid phase sintering addition. Dy has been shown to increase the domain wall energy thus making nucleation more difficult while Al is thought to improve the wettability of the Nd-oxide phases.Bulk polished samples were examined in a JEOL 35CF scanning electron microscope (SEM) operated at 30keV equipped with a Be window energy dispersive spectrometer (EDS) detector in order to determine the phase distribution.

SOLID SOLUTION FORMATION DURING LIQUID PHASE SINTERING

1986 ◽  
Vol 47 (C1) ◽  
pp. C1-441-C1-445
Author(s):  
E. KOSTIĆ ◽  
S. J. KISS ◽  
D. CEROVIĆ
Keyword(s):  
Solid Solution ◽  
Liquid Phase ◽  
Liquid Phase Sintering ◽  
Solid Solution Formation ◽  
Solution Formation

Microstructure development during liquid-phase sintering

2005 ◽  
Vol 96 (2) ◽  
pp. 141-147 ◽  
Author(s):  
Sung-Min Lee ◽  
Suk-Joong L. Kang
Keyword(s):  
Liquid Phase ◽  
Liquid Phase Sintering ◽  
Microstructure Development

Modeling of aerated upflow fixed bed reactors for nitrification

1999 ◽  
Vol 39 (4) ◽  
pp. 85-92 ◽  
Author(s):  
J. Behrendt
Keyword(s):  
Mathematical Model ◽  
Mass Transfer ◽  
Liquid Phase ◽  
Gas Phase ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Bulk Liquid ◽  
Initial Value ◽  
Fixed Bed Reactors ◽  
Number Of Cells

A mathematical model for nitrification in an aerated fixed bed reactor has been developed. This model is based on material balances in the bulk liquid, gas phase and in the biofilm area. The fixed bed is divided into a number of cells according to the reduced remixing behaviour. A fixed bed cell consists of 4 compartments: the support, the gas phase, the bulk liquid phase and the stagnant volume containing the biofilm. In the stagnant volume the biological transmutation of the ammonia is located. The transport phenomena are modelled with mass transfer formulations so that the balances could be formulated as an initial value problem. The results of the simulation and experiments are compared.

ChemInform Abstract: Liquid Phase Sintering of Silicon Carbide.

ChemInform ◽  
2010 ◽  
Vol 27 (32) ◽  
pp. no-no
Author(s):  
F. K. VAN DIJEN ◽  
E. MAYER
Keyword(s):  
Silicon Carbide ◽  
Liquid Phase ◽  
Liquid Phase Sintering

scholarly journals Synthesis and Na+ Ion Conductivity of Stoichiometric Na3Zr2Si2PO12 by Liquid-Phase Sintering with NaPO3 Glass

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3790
Author(s):  
Yongzheng Ji ◽  
Tsuyoshi Honma ◽  
Takayuki Komatsu
Keyword(s):  
Solid State ◽  
Liquid Phase ◽  
Sintering Temperature ◽  
Liquid Phase Sintering ◽  
Ion Conductivity ◽  
X Ray Diffraction ◽  
Conventional Solid State Reaction ◽  
X Ray ◽  
Sintering Time ◽  
Lower Activation

Sodium super ionic conductor (NASICON)-type Na3Zr2Si2PO12 (NZSP) with the advantages of the high ionic conductivity, stability and safety is one of the most famous solid-state electrolytes. NZSP, however, requires the high sintering temperature about 1200 °C and long sintering time in the conventional solid-state reaction (SSR) method. In this study, the liquid-phase sintering (LPS) method was applied to synthesize NZSP with the use of NaPO3 glass with a low glass transition temperature of 292 °C. The formation of NZSP was confirmed by X-ray diffraction analyses in the samples obtained by the LPS method for the mixture of Na2ZrSi2O7, ZrO2, and NaPO3 glass. The sample sintered at 1000 °C for 10 h exhibited a higher Na+ ion conductivity of 1.81 mS/cm at 100 °C and a lower activation energy of 0.18 eV compared with the samples prepared by the SSR method. It is proposed that a new LPE method is effective for the synthesis of NZSP and the NaPO3 glass has a great contribution to the Na+ diffusion at the grain boundaries.

Sign in / Sign up

Export Citation Format

Share Document