Effect of La and W dopants on dielectric and ferroelectric properties of PZT thin films prepared by sol–gel process

2017 ◽  
Vol 124 (1) ◽  
Author(s):  
Mi Xiao ◽  
Zebin Zhang ◽  
Weikang Zhang ◽  
Ping Zhang
Keyword(s):  
Thin Films ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Pzt Thin Films ◽  
Sol Gel Process

scholarly journals Robust ferroelectricity enhancement of PZT thin films by a homogeneous seed layer

2021 ◽  
Author(s):  
jie jiang ◽  
Lei Liu ◽  
Kuo Ouyang ◽  
Zhouyu Chen ◽  
Shengtao Mo ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Properties ◽  
Remanent Polarization ◽  
Perovskite Phase ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Pzt Thin Films ◽  
Large Dielectric Constant ◽  
Sol Gel Process ◽  
A New Technique

Abstract With its excellent ferroelectric properties such as large dielectric constant and large remanent polarization, PZT thin films are extensively used in micro-sensors and other devices. In this study, the sol-gel process was used to fabricate Pb(Zr0.52Ti0.48)O3 thin films with Pb(ZrxTi1−x)O3 seed islands. The experimental consequences demonstrate that all the Pb(Zr0.52Ti0.48)O3 thin films with Pb(ZrxTi1−x)O3 seeds show pure perovskite phase with no other impurity phases, and the electrical properties of Pb(Zr0.52Ti0.48)O3 thin films modified by Pb(ZrxTi1−x)O3 seed islands with different Zr/Ti ratios are improved, such as remanent polarization increased, dielectric properties increased, coercive electric field decreased, leakage current density decreased, etc. In particular, the electrical properties of the Pb(Zr0.52Ti0.48)O3 thin films with Pb(ZrxTi1−x)O3 seed islands are the most optimal when the x is 0.52. This paper provides a new technique for optimizing the electrical properties of PZT thin films, which is of great significance for breaking through the bottleneck of the development of ferroelectric memory.

The effect of Mn/Nb doping on dielectric and ferroelectric properties of PZT thin films prepared by sol–gel process

2015 ◽  
Vol 74 (2) ◽  
pp. 378-386 ◽  
Author(s):  
Huajun Sun ◽  
Yong Zhang ◽  
Xiaofang Liu ◽  
Shanshan Guo ◽  
Yi Liu ◽  
...  
Keyword(s):  
Thin Films ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Pzt Thin Films ◽  
Sol Gel Process ◽  
Nb Doping

The Characterization and Electrical Properties of DOPED PZT Thin Films Prepared by Sol-Gel Processing

1994 ◽  
Vol 361 ◽  
Author(s):  
Wan In Lee ◽  
J.K. Lee ◽  
Elsub Chung ◽  
C.W. Chung ◽  
I.K. Yoo ◽  
...  
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Remanent Polarization ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Current Level ◽  
Pzt Thin Films ◽  
Sol Gel Process ◽  
Pzt Films ◽  
Gel Processing

ABSTRACTPZT (Zr/Ti = 53/47), PNZT (4% Nb doped PZT), PSZT (2% Sc doped PZT), and PSNZT (1% Sc and 1% Nb doped PZT) thin films were prepared by a sol-gel process. They were characterized by XRD, SEM and TEM. Both crystallographic orientation and grain size of PZT films can be changed by doping. Pt/PZT/Pt capacitors were fabricated for the measurement of ferroelectric properties. By doping with both Sc and Nb, the fatigue performance of the PZT films was considerably improved and the coercive field was decreased, while the remanent polarization was not changed. In addition, the effect of dopants on the leakage current level of PZT films was studied.

The Effect of RuO2/Pt Hybrid Bottom Electrode Structure on The Microstructure and Ferroelectric Properties of Sol-Gel Derived PZT Thin Films

1997 ◽  
Vol 493 ◽  
Author(s):  
Seung-Hyun Kim ◽  
J. G. Hong ◽  
J. C. Gunter ◽  
H. Y. Lee ◽  
S. K. Streiffer ◽  
...  
Keyword(s):  
Thin Films ◽  
Leakage Current ◽  
Bottom Electrode ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Chemical Solution ◽  
Electrode Structure ◽  
Solution Deposition ◽  
Pzt Thin Films ◽  
Chemical Solution Deposition Method

ABSTRACTFerroelectric PZT thin films on thin RuO2 (10, 30, 50nm)/Pt hybrid bottom electrodes were successfully prepared by using a modified chemical solution deposition method. It was observed that the use of a lOnm RuO2Pt bottom electrode reduced leakage current, and gave more reliable capacitors with good microstructure compare to the use of thicker RuO2/Pt bottom electrodes. Typical P-E hysteresis behavior was observed even at an applied voltage of 3V, demonstrating greatly improved remanence and coercivity. Fatigue and breakdown characteristics, measured at 5V, showed stable behavior, and only below 13-15% degradation was observed up to 1010 cycles. Thicker RuO2 layers resulted in high leakage current density due to conducting lead ruthenate or PZT pyrochlore-ruthenate and a rosette-type microstructure.

Characterisation of Ferroelectric Lithium Tantalate Thin Films Prepared by a Sol-Gel Process

1993 ◽  
Vol 321 ◽  
Author(s):  
Chianping Ye ◽  
Paul Baude ◽  
Dennis L. Polla
Keyword(s):  
Thin Films ◽  
Curie Temperature ◽  
Single Crystal ◽  
Silicon Substrate ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Precursor Solution ◽  
Pyroelectric Coefficient ◽  
Crystal Silicon ◽  
Sol Gel Process

ABSTRACTThin LiTaO3 films were prepared by spin coating of polymerized sol-gel precursor solution. Films have been deposited on single crystal silicon substrate, Ti/Pt or SiO2 coated silicon substrate. Films were characterized by x-ray diffraction, dielectric and pyroelectric Measurements. High Curie temperature (above 550 °C) was assumed for LiTaO3 thin films from the temperature dependence of dielectric constant. Replacing 35% of tantalum by titanium atoms in the LiTaO3 precursor solution has resulted the thin films with Curie temperature of 330 °C. The lower Curie temperature leads to the larger pyroelectric coefficient at room-temperature, which is more than double that of the undoped LiTaO3 thin films. The dielectric, pyroelectric, and ferroelectric properties have been compared to the single crystal LiTaO3 and ceramic Li0.91Ta0.73Ti0.36O3. LiTaO3 thin films are available by sol-gel process at low temperature, and their properties may possibly be controlled by varying the composition of the sol-gel precursor solution.

Ten Analyses Of Sol-Gel Derived And Sputtered PZT Thin Films

1990 ◽  
Vol 200 ◽  
Author(s):  
Cheng-Chen Hsueh ◽  
Martha L. MeCartney
Keyword(s):  
Thin Films ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Rf Magnetron Sputtering ◽  
Pzt Thin Films ◽  
Ferroelectric Domains ◽  
Metal Organic ◽  
Organic Precursors ◽  
Acid Catalyzed ◽  
Sol Gel Films

ABSTRACTFerroelectric PZT thin films were prepared by sol-gel methods and RF magnetron sputtering. Sputtered PZT fast fired at 650° for 30 minutes showed microporosity. For the sol-gel route, solution precursors had a significant effect on the microstructure of the crystalline PZT films. PZT thin films derived from metal-organic precursors dissolved in n-propanol were observed to have large and microporous spherulitic grains on the order of 2 μm and phase separation in acetic acid-catalyzed films. In contrast, PZT precursors originated from alcohol exchanges with 2-methoxyethanols resulted in dense films with fine grains of ∼0.2 μm and clear evidence of ferroelectric domains. The dense sol-gel films possessed superior dielectric and ferroelectric properties.

scholarly journals Local Fatigue Evaluation in PZT Thin Films with Nanoparticles by Piezoresponse Force Microscopy

2012 ◽  
Vol 2012 ◽  
pp. 1-9
Author(s):  
B. S. Li
Keyword(s):  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Precursor Solution ◽  
Grain Morphology ◽  
Piezoresponse Force Microscopy ◽  
Lead Zirconate ◽  
Fatigue Performance ◽  
Pzt Thin Films

Lead zirconate titanate (PZT) thin films with the morphotropic phase boundary composition (Zr/Ti = 52/48) have been prepared using a modified diol-based sol-gel route by introducing 1–5 mol% barium titanate (BT) nanoseeds into the precursor solution on platinized silicon substrates (Pt/Ti/SiO2/Si). Macroscopic electric properties of PZT film with nanoparticle showed a significant improvement of ferroelectric properties. This work aims at the systematic study of the local switching polarization behavior during fatigue in PZT films with and without nanoparticles by using very recent developed scanning piezoelectric microscopy (SPM). We show that the local fatigue performance, which is characterized by variations of local piezoloop with electric cycles, is significantly improved by adding some nanoseeds. It has been verified by scanning electron microscope (SEM) that the film grain morphology changes from columnar to granular structure with the addition of the nanoseeds. On the other hand, the existence of PtxPb transition phase, which existed in interface at early crystallization stage of pure PZT thin film, deteriorates the property of the interface. These microstructures and the interfaces of these films significantly affect the electrons injection occurred on the interfaces. The domain wall pinning induced by injected electrons and the succeeding penetration into the films is discussed to explain the fatigue performance.

Sign in / Sign up

Export Citation Format

Share Document