Advanced Radiative Transfer Modeling System (ARMS): A New-Generation Satellite Observation Operator Developed for Numerical Weather Prediction and Remote Sensing Applications

<div> <div> <div> <div> <p>The increasing resolution of numerical weather prediction models makes 3D radiative effects more and more important. These effects are usually neglected by the simple 1D independent column approximations used in most of the current models. On top of that, these 1D radiative transfer solvers are also called far less often than the model&#8217;s dynamical core.</p> <p>To address these issues, we present a new &#8222;dynamic&#8220; approach of solving 3D radiative transfer. Building upon the existing TenStream solver (Jakub and Mayer, 2015), radiation in this 3D model is not solved completely in each radiation time step, but is rather only transported to adjacent grid boxes. For every grid box, outgoing fluxes are then calculated from the incoming fluxes from the neighboring grid cells of the previous time step. This allows to reduce the computational cost of 3D radiative transfer models to that of current 1D solvers.</p> <p>Here, we show first results obtained with this new solver with a special emphasis on heating rates. Furthermore, we demonstrate issues related to the dynamical treatment of radiation as well as possible solutions to these problems.</p> <p>In the future, the speed of this newly developed 3D dynamic TenStream solver will be further increased by reducing the number of spectral bands used in the radiative transfer calculations with the aim to get a 3D solver that can be called even more frequently than the 1D two-stream solvers used nowadays.</p> <p>Reference:<br><span>Jakub, F. and Mayer, B. (2015), A three-dimensional parallel radiative transfer model for atmospheric heating rates for use in cloud resolving models&#8212;The TenStream solver, Journal of Quantitative Spectroscopy and Radiative Transfer, Volume 163, 2015, Pages 63-71, ISSN 0022-4073, . </span></p> </div> </div> </div> </div>

Download Full-text

An Evaluation of Radiative Transfer Simulations of Cloudy Scenes from a Numerical Weather Prediction Model at Sub-Millimetre Frequencies Using Airborne Observations

Remote Sensing ◽

10.3390/rs12172758 ◽

2020 ◽

Vol 12 (17) ◽

pp. 2758

Author(s):

Stuart Fox

Keyword(s):

Optical Properties ◽

Radiative Transfer ◽

Numerical Weather Prediction ◽

Weather Prediction ◽

Full Range ◽

Numerical Weather Prediction Model ◽

Atmospheric Measurements ◽

Numerical Weather ◽

Nwp Model ◽

Cloud Ice

The Ice Cloud Imager (ICI) will be launched on the next generation of EUMETSAT polar-orbiting weather satellites and make passive observations between 183 and 664 GHz which are sensitive to scattering from cloud ice. These observations have the potential to improve weather forecasts through direct assimilation using "all-sky" methods which have been successfully applied to microwave observations up to 200 GHz in current operational systems. This requires sufficiently accurate representations of cloud ice in both numerical weather prediction (NWP) and radiative transfer models. In this study, atmospheric fields from a high-resolution NWP model are used to drive radiative transfer simulations using the Atmospheric Radiative Transfer Simulator (ARTS) and a recently released database of cloud ice optical properties. The simulations are evaluated using measurements between 89 and 874 GHz from five case studies of ice and mixed-phase clouds observed by the Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 research aircraft. The simulations are strongly sensitive to the assumed cloud ice optical properties, but by choosing an appropriate ice crystal model it is possible to simulate realistic brightness temperatures over the full range of sub-millimetre frequencies. This suggests that sub-millimetre observations have the potential to be assimilated into NWP models using the all-sky method.

Download Full-text

A fast visible-wavelength 3D radiative transfer model for numerical weather prediction visualization and forward modeling

Atmospheric Measurement Techniques ◽

10.5194/amt-13-3235-2020 ◽

2020 ◽

Vol 13 (6) ◽

pp. 3235-3261

Author(s):

Steven Albers ◽

Stephen M. Saleeby ◽

Sonia Kreidenweis ◽

Qijing Bian ◽

Peng Xian ◽

...

Keyword(s):

Solar Radiation ◽

Radiative Transfer ◽

Numerical Weather Prediction ◽

Land Surface ◽

Weather Prediction ◽

Lower Boundary ◽

Radiative Transfer Model ◽

Transfer Model ◽

Numerical Weather ◽

Visible Wavelength

Abstract. Solar radiation is the ultimate source of energy flowing through the atmosphere; it fuels all atmospheric motions. The visible-wavelength range of solar radiation represents a significant contribution to the earth's energy budget, and visible light is a vital indicator for the composition and thermodynamic processes of the atmosphere from the smallest weather scales to the largest climate scales. The accurate and fast description of light propagation in the atmosphere and its lower-boundary environment is therefore of critical importance for the simulation and prediction of weather and climate. Simulated Weather Imagery (SWIm) is a new, fast, and physically based visible-wavelength three-dimensional radiative transfer model. Given the location and intensity of the sources of light (natural or artificial) and the composition (e.g., clear or turbid air with aerosols, liquid or ice clouds, precipitating rain, snow, and ice hydrometeors) of the atmosphere, it describes the propagation of light and produces visually and physically realistic hemispheric or 360∘ spherical panoramic color images of the atmosphere and the underlying terrain from any specified vantage point either on or above the earth's surface. Applications of SWIm include the visualization of atmospheric and land surface conditions simulated or forecast by numerical weather or climate analysis and prediction systems for either scientific or lay audiences. Simulated SWIm imagery can also be generated for and compared with observed camera images to (i) assess the fidelity and (ii) improve the performance of numerical atmospheric and land surface models. Through the use of the latter in a data assimilation scheme, it can also (iii) improve the estimate of the state of atmospheric and land surface initial conditions for situational awareness and numerical weather prediction forecast initialization purposes.

Download Full-text